I am saddened by manufactures going out of business over the last few years. My company supports manufactures by producing aluminum die castings and zinc die castings for their products. In the last few years, some of my customers could …
Continue reading
Author Archives: admin
9/11 Memorial in 2020
The 9-11 terrorist attack was a series of four coordinated Islamic terrorist group attacks by al-Qaeda on the United States on the morning of Tuesday, September 11, 2001. The attacks killed almost 3,000 people, injured over 6,000 others, and caused at least $10 billion in infrastructure and property damage.
They used four airliners operated by two major U.S. airline carriers United Airlines and American Airlines, all of which departed from airports in the northeastern United States bound for California. These airplanes were hijacked by 19 al-Qaeda terrorists. Two of the planes, American Airlines Flight 11 and United Airlines Flight 175, were crashed into the North and South towers, respectively, of the World Trade Center complex in New York City. Within an hour and 42 minutes, both 110-story towers collapsed, with debris and the resulting fires causing partial or complete collapse of all other buildings in the World Trade Center complex, including the 47-story 7 World Trade Center tower, as well as significant damage to ten other large surrounding structures. A third plane, American Airlines Flight 77, was crashed into the Pentagon (the headquarters of the United States Department of Defense) in Arlington County, Virginia, leading to a partial collapse of the building’s western side. The fourth plane, United Airlines Flight 93, initially was steered toward Washington, D.C., but crashed into a field in Stonycreek Township near Shanksville, Pennsylvania, after its passengers tried to overcome the hijackers. 9/11 was the single deadliest incident for firefighters and law enforcement officers in the history of the United States, with 343 and 72 killed respectively.
Holiday at Kinetic Die Casting Company
Die Casting Company
Kinetic Die Casting Company Jobs
American Die Casting Company
Die Casting Company Information
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices
Methods for Making Die Casting Aluminum Boxes 2020
Methods for making Die Casting Aluminum Boxes. There are Methods for making Die Casting Aluminum Boxes. Die casting aluminum boxes through a process where molten aluminum is forced under high pressure into mold cavities. This process, invented in the 1830’s by Elisha K. Root, makes sure that the boxes which will be produced have a fine surface quality, well detailed design, and must also be dimensionally stable. What are the methods?
- The first method requires the mold to be sprayed with lubricant and then closed. The lubricant is necessary since it can control the die’s temperature and can also aid in casting removal. Between 10-175 Mpa or 1,500-25,000 psi is the pressure necessary before the molten metal is shot into the die. The said pressure is maintained even after the die is filled. The die will only be opened after the casting has solidified. When it is opened, the ejector pins shall eject the shots. Afterwards, the scrap with the gate, flash, sprues, and runners are separated from the castings. A sprue is a passage where the molten aluminum can be introduced into the mold while flash is excess material connected to the product which must be removed. The removal of the scrap, gate, flash, sprues, and runners can be done through the use of a hydraulic or power press or can even be done by sawing. However, sawing requires grinding in order to even the scrap marks.
Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a die casting company specializing in aluminum and zinc parts. If you would like to request a quote, please visit our website:Kinetic Die Casting Company
Die Casting Boxes and Enclosure Die Castings
Die Casting Box Parts
Kinetic Die Casting Newsletter Articles
Die Casting Parts Draft Angle
Die Casting Box Pictures
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Box Prices
Aluminum Car Radiators 2020
Aluminum Car Parts
A small leak on your car Radiator can be indicating a larger problem. A cooling system that runs low too often is less efficient and you can damage your cooling system by letting the coolant level get too low. Too little coolant flow can be bad, but at normal and high operating temperatures, the rate at which coolant moves through the radiator does not change the amount of heat that is dissipated by the cooling cores. The amount of cooling will not be reduced even when the mean temperature of the coolant rises and flows faster.
Many cheap coolants do not have the corrosion protection, PH balancing, or sediment prevention that the top-quality coolants do. These low quality coolants do not have the same additives of name brand coolants. To help your engine stay cooler, rev up your engine slightly when you are overheating in traffic to help push more air across the cooling cores and more coolant through the engine.
All water-cooled car radiator parts have an automatically controlled electric fan on the radiator. The way the system is supposed to work is that, after the engine is started, the thermostat on the engine stays closed until the coolant temperature at the ENGINE reaches 87C (189F) degrees. It is the responsibility of the Radiator to keep the coolant temperature from running too high. However, if the temperature is too high it is not necessarily the radiator.
A poor radiator cap will not last as long or stay properly calibrated, and either open at too low or two high a pressure. Make sure your radiator cap is the proper one for your cooling system. Higher pressure means a higher boiling point, which means more efficient cooling. A new radiator cap is usually all that is required for this (but don’t over pressurize your radiator cores and wreck the whole system).
Most Car Radiators’ cooling system failures arise from poor radiator maintenance. Many radiator problems can be prevented with regular maintenance and periodic professional inspections of you car radiator and cooling system. The most common radiator problems are: leaky fittings or seams, fin deterioration and bond failure, electrolysis, cracked tank, and fan damage.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Aluminum Parts or Plastic Parts
Military Die Casting Parts
Die Casting Tooling
Blogspot Kineticdiecasting
Labor Day Weekend 2020
Kinetic Die Casting Company will be closed today, Monday September 7, in observance of Labor Day.
Some fun facts from the US Department of Labor (https://www.dol.gov/laborday/history.htm)
Closed Labor Day 2018
The first Labor Day holiday was celebrated on Tuesday, September 5, 1882, in New York City, in accordance with the plans of the Central Labor Union. The Central Labor Union held its second Labor Day holiday just a year later, on September 5, 1883.
In 1884 the first Monday in September was selected as the holiday, as originally proposed, and the Central Labor Union urged similar organizations in other cities to follow the example of New York and celebrate a “workingmen’s holiday” on that date. The idea spread with the growth of labor organizations, and in 1885 Labor Day was celebrated in many industrial centers of the country.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Permalink: https://www.kineticdiecasting.com/kdc/closed-labor-day-2018/
Kineticdc makes:
Aluminum Die Casting Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Holiday at Kinetic Die Casting Company
Die Casting Company
Kinetic Die Casting Company Jobs
American Die Casting Company
Die Casting Company Information
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices
Posted in Blogger, newsletter
Tagged #diecasting, #kineticdc, American Business, Die Casting Company, Kinetic Die Casting Company
Leave a comment
Aluminum Auto Parts and Car Parts 2020
Auto Parts and Car Parts and Automotive parts. Car Parts or Auto parts in aluminum are 1/3 the weight of steel parts. Aluminum auto parts are formed from a few hundred to thousands of auto parts a day. Many features of the automotive part are manufactured “net shape” to save the cost of useless materials and the additional labor of machining. Mounting holes are usually produced into the aluminum auto part during production. also saving cost. Many of the primary “tier one” automotive manufacturers have their own manufacturing plants. They also purchase aluminum automotive parts from companies such as Kinetic Die Casting Company.
Good news for Chevy parts, Toyota parts, Nissan parts, Honda parts and Jeep parts users! Auto Parts Train, the country’s leading auto parts dealer is now selling these top quality auto parts at the lowest prices. While you get satisfied from the auto parts’ superior quality and performance, you can also save from Auto Parts Train’s hottest deals on these products. Up to 50% discounts are offered plus you get more choices as Auto Parts Train includes auto parts for older and the most recent models.
http://www.kineticdiecasting.com/automotive_part_pictures.html
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Die Casting Auto Parts
Die Casting Car Parts
Manufacturing Die Casting Parts
Aluminum Die Casting Company
Photos Die Casting Car Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Automotive Parts Prices
Posted in Auto Parts, Blogger, Die Casting Parts, newsletter
Tagged #diecasting, Aluminum Auto Parts, auto parts, automotive, die casting, Manufacturing
Leave a comment
