Heat Sinks in Aluminum draw heat from another source from thermal contact. These are mainly used in electronic parts and automobile parts but there are other uses like: • Airplane parts • Circuit boards • Microwaves • Cell phones • …
Continue reading
Category Archives: Aircraft Parts
Die Casting Aerospace Parts 2021
Kinetic Die Casting Company makes several types of Die Casting Aerospace Parts. These aerospace die casting parts are used for many types of purposes. Some of these parts are used on many types of aircraft, such as: airplanes, jet planes or helicopters.
Aircraft manufacturers typically specify aluminum die casting to make the aerospace parts because aluminum is lightweight and inexpensive as well as very strong.
- Lightweight – Aluminum weighs only .098 pounds each cubic inch of material as compared to zinc which weighs about 2.44 pounds each cubic Inch.
- Inexpensive – Aluminum is the third most common element on earth, so it is more available than other materials. Aluminum is used in over 80% of all die castings produced in the world.
- Strong – Aluminum parts can be geometrically designed to be stronger than steel. Look up “aluminum is stronger than steel” on Google to see the results.
These aerospace parts range from: airplane engine piston heads, airplane distributor cap housings, fuel system parts, detention ring parts, cargo loading housings, lighting fixture parts, electronic enclosures, electronic housings, motor housings and various other aluminum die casting parts.
The companies that trust us to purchase their die casting parts from Kinetic Die Casting Company are many.
- Here are a few of the aircraft and aerospace companies that we can name:
- Robinson Helicopter
- Ancra International
- Whittaker Controls
- AAR Cargo Systems
- Boeing Aerospace
- Barry Controls
- Meggitt Aerospace
- Parker Hannifin Aerospace Corporation (Parker FSD)
- Circle Seal Aerospace
- Kelly Aerospace
- Curtiss Wright
- Honeywell
- United Technologies Aerospace
Low Quantities.
Many of these companies order lower quantities. One of the companies listed here will order less than 50 parts at a time. Many of these companies order 250 parts or less. Kinetic Die casting will accept any purchase order quantity.
Contact Kinetic Die Casting Company when you need any of the following: Low Quantities, Great Quality, Fast Delivery.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, CA 91605
Aerospace Die Castings and Aircraft Die Castings
Die Casting Aerospace Parts
Airplane Die Casting Parts
Die Casting Aerospace Part Pictures
Airplane Die Casting Part Pictures
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200
Die Casting Aerospace Parts Prices
Posted in Aircraft Parts, Blogger, Diecasting Process, newsletter
Tagged #diecasting, #kineticdc, Aircraft Parts, Airplane Castings, Airplane Parts
Leave a comment
Where do You Find Aluminum Aircraft Parts in 2021?
Die Cast Aluminum Part
Where Do You Find Aluminum Aircraft Parts. Aircraft parts are raw parts for instance wood, aluminum, steel or other complex materials. The other materials frequently utilized on aerospace transportation consist of magnesium alloys and magnesium and also titanium and its alloys.
Aluminum is the precursor in aviation materials for a lot of grounds. Principally aluminum is light, weighs about 0.1 pound for every cubic inch as opposed to .28 pounds in iron. Aluminum in its uncontaminated condition is not too tough. It has a tensile strength of around 13,000 psi. Aluminum could be taken care of to boost its toughness to that superior to structural steel. When you alloy aluminum with other little quantities of metals, aluminum can attain tensile strength on the charge close to 100,000 psi. One more asset of aluminum is its comfort to the creation and production of parts.
Aircraft component parts are selected by any selection method the producer or retailer employs, even when there is an AN or MS benchmark for the part. It is basically a part quantity to recognize the part and where it should be utilized.
There are a lot of dealers of mass aircraft parts. Several would bring a larger assortment of hardware than other dealers would. The nearer you can locate a fine dealer with class material at an excellent price, the more you can save on delivery costs.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting Company can manufacture aluminum car parts, aluminum hardware, and Aluminum Lighting Partsaluminum lighting parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Automotive Die Casting Parts
Die Casting Bracket Hardware
Airplane Die Casting Parts
Zinc Die Casting Company California
How are Aluminum Aircraft Parts Used in 2021?
How Are Aluminum Aircraft Parts Used? The popular aircraft airframe has been the most challenging function for aluminum alloys; to account the progress of the high strength alloys is as well to account the progress of airframes. Duralumin is the first high strength, high temperature treatable aluminum alloy and was utilized originally for the structure of stiff airships. Duralumin was actually an aluminum-copper-magnesium alloy. It was initiated in the country of Germany and expanded in the United States of America as alloy 17S-T. It was employed first and foremost as a sheet and plate.
As the 20th century evolved, aluminum turned out to be an important metal in aircraft. The cylinder mass of the engine that controlled the plane of the famous Wright brothers at Kitty Hawk in 1903 was a one piece die casting in an aluminum alloy consisting of 8% copper. The aluminum propeller blades emerged as early as 1907 and aluminum seats, covers, cast brackets, cowlings, and comparable parts were regular by the start of the World War I.
In the year 1916, L. Brequet created a scouting bomber that identified the primary utilization of aluminum in the functioning configuration of a plane. By the end of the war, Germany and the Allies used aluminum alloys intended for the constructional scaffolding of fuselage and section assemblies.
Kinetic Die Casting is a aluminum and zinc die casting company. If you would like to know more information, please visit our website:Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
What Are Die Casting Parts?
Die Casting Aluminum Heat Sinks
Aluminum Boxes Diecastings
Kinetic Die Casting SEO
Methods for Making Aluminum Aircraft Parts in 2021
Methods for Making Aluminum Aircraft Parts. Aluminum which are used in the making of aircraft parts are usually alloyed with other kinds of metals to make the material stronger. This material is at times called aluminium. Aircraft engineers favor aluminum for its density which is low and because it is light weight.
Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is located in Southern California. KDC specializes in aluminum and zinc die casting tooling. If you would like a quote, please visit our website:Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Aluminum Parts or Plastic Parts
Military Die Casting Parts
Die Casting Tooling
Blogspot Kineticdiecasting
Why Should You Use Aluminum Aircraft Parts in 2021?
Aluminum Aircraft Parts
Why Should You Use Aluminum Aircraft Parts? We should use aluminum in aircraft parts because it is light in weight and low in density. The aluminum is actually alloyed with other kinds of metals to make it much tougher and stronger. This is often called durable aluminum.
Aluminum alloys that are used in the aerospace production are very strong and have the ability to act upon well in difficult and harsh settings. The 7075 Aluminum is the best choice for alloy when it comes to mechanized aircraft parts, and 5052 aluminum, which is not really as strong but is easier to weld, is also often used. The Aluminum 7075 is perfect for extremely stressed parts and is said to be the strongest kind of aluminum. It has excellent resistance to high temperature and corrosion, which are both important features in aircraft aluminum.
The 7075 and 5052 aluminum could be altered into billets, plates, sheets, rods, tubes, bars, and coils, which are useful in the construction of aircraft. Other substitutes to aluminum are wood, which is actually lighter in weight but weaker than aluminum. Aircraft metal should be very strong but also light in weight, and aluminum displays these necessities, which makes it the perfect selection for airplane parts manufacturing.
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Light Fixture Die Casting Parts
Photos Die Casting Parts
Aerospace Die Casting Parts
Roofing Tile Molds Blog
Posted in Aircraft Parts, Aluminum Die Casting, Die Casting Parts
Tagged #diecasting, #kineticdc, Aircraft Parts, Airplane Castings, Airplane Parts, aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts, Die Casting Parts, Kinetic Die Casting Company, Manufacturing
Leave a comment
