Metal Working for Aircrafts: Die Castings Used for Airplane Parts. When it comes to aircraft assembly parts, the most important considerations are safety, strength and reliability. The metal parts will sustain turbulence in the upper atmosphere, and they will experience …
Continue reading
Category Archives: Aluminum Die Casting
Aerospace Diecastings
Kinetic Die Casting Company makes several types of Die Casting Aerospace Parts. These aerospace die casting parts are used for many types of purposes. Some of these parts are used on many types of aircraft, such as: airplanes, jet planes or helicopters.
Aircraft manufacturers typically specify aluminum die casting to make the aerospace parts because aluminum is lightweight and inexpensive as well as very strong.
- Lightweight – Aluminum weighs only .098 pounds each cubic inch of material as compared to zinc which weighs about 2.44 pounds each cubic Inch.
- Inexpensive – Aluminum is the third most common element on earth, so it is more available than other materials. Aluminum is used in over 80% of all die castings produced in the world.
- Strong – Aluminum parts can be geometrically designed to be stronger than steel. Look up “aluminum is stronger than steel” on Google to see the results.
These aerospace parts range from: airplane engine piston heads, airplane distributor cap housings, fuel system parts, detention ring parts, cargo loading housings, lighting fixture parts, electronic enclosures, electronic housings, motor housings and various other aluminum die casting parts.
The companies that trust us to purchase their die casting parts from Kinetic Die Casting Company are many.
- Here are a few of the aircraft and aerospace companies that we can name:
- Robinson Helicopter
- Ancra International
- Whittaker Controls
- AAR Cargo Systems
- Boeing Aerospace
- Barry Controls
- Meggitt Aerospace
- Parker Hannifin Aerospace Corporation (Parker FSD)
- Circle Seal Aerospace
- Kelly Aerospace
- Curtiss Wright
- Honeywell
- United Technologies Aerospace
Low Quantities.
Many of these companies order lower quantities. One of the companies listed here will order less than 50 parts at a time. Many of these companies order 250 parts or less. Kinetic Die casting will accept any purchase order quantity.
Permalink: https://www.kineticdiecasting.com/kdc/aerospace-diecastings/
Contact Kinetic Die Casting Company when you need any of the following: Low Quantities, Great Quality, Fast Delivery.
“The Parts We Make Today, We Ship Today”
Aluminum Heat Sinks
Die Casting Car Parts
Aluminum Hardware Brackets
Aerospace Die Casting Parts
Military Die Casting Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Process
Kinetic Die Casting Company uses the die casting process to make aluminum die castings and zinc die casting parts. The die casting process, simplified, is described as follows:
- Our customer provides us tooling (https://www.kineticdiecasting.com/tooling.html), a die, a mold or inserts that we use to make their parts. We can also produce the tooling for our customers.
- We put together the tooling and mount the tooling in our die casting machine. This takes a few hours.
- We fill a furnace with the proper die casting alloy metal (https://www.kineticdiecasting.com/Alloy_Data.pdf) to make the parts for our customer. The metal takes 4 hours to melt to the casting temperature.
- While the furnace is heating up we heat up the tooling to make the castings.
- When the tooling is hot and the furnace has melted the aluminum, we begin the die casting process.
- We spray the tooling with a release agent so the parts do not stick in the tooling.
- We close the tooling inside our die casting machine.
- The metal is ladled into a shot sleeve, a piston drives the metal into the tooling using great force.
- Our die casting machine opens, the ejector pins push the part out of the tooling
- We begin the process again by spraying the tooling.
- We repeat this process 200 times to 500 times in a 10 hour shift.
- When completed making raw castings, we trim the excess material called “flash”. We use a trim die in a trim press or we sand parts with a belt sander and file them by hand. Sometimes this takes longer than the casting process.
- At this point, some parts are put in boxes and shipped the same day. Other parts are machined. Some parts get painted or chemical coated. All parts are inspected prior to shipping to our customers.
This is a very simplified description of the die casting manufacturing process.
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
What is Die Casting
Die Casting Part Pictures
Quote Die Casting Part Prices
Diecast Tooling
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Permalink: https://www.kineticdiecasting.com/kdc/die-casting-process/
Machine Operator Job 04-29-19
Full time 40 hours a week. Overtime possible. Kinetic Die Casting Company has Die Casting machine Operator Jobs available. A die casting machine operator must be able to efficiently operate a die casting machine to make good quality die casting parts. The die casting machine operator should be able to make adjustments to the die casting machine to improve the quality and efficiency of the die casting parts produced in their machine.
Die Casting Machine Operator Job Skills and Job Abilities
* Have experience operating an aluminum die casting machine.
* Be able to make adjustments to the die casting machine to improve quality.
* Be able to make adjustments to the die casting machine to improve efficiency.
* Willing to learn to set dies in die casting machine.
* Willing to learn to set trim dies in trim press.
* Must be willing to work as a team member.
* Must be willing to work any shift.
* Must be willing to work overtime.
* Must have reliable transportation to Kinetic Die Casting Company.
* Die casting mold setup experience is a plus.
* Forklift experience is a plus.
* Automatic equipment setup experience for bonus
Permalink: https://www.kineticdiecasting.com/kdc/machine-operator-job-04-29-19/
How to get the Kinetic Die Casting Company job:
- Click on the Online Job Application Button to complete our employment application online for position at Kinetic Die Casting Company.
- Send completed Job Application, Resume and Salary Desired
to Kinetic Die Casting Company for a Die Casting Job Interview.
|
=== Click this “Button” for PDF
=== Use this button to get the latest |
|
Send:
Completed Job Application, Full Work Resume and Salary Expected
Mail to:
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood Ca. 91605
Attention: Human Resources
OR
* Fax: 818-982-0877 or
* Email: sales@kineticdc.com
==> 818-982-9200 < ==
Call to set up a job interview.
Aluminum Autoparts Diecastings
The advantages of Die Casting Aluminum Automotive Parts over steel parts. In recent decades, aluminum and aluminum die casting is used more and more in car manufacturing. Aluminum has started to replace steel as base metal for car frames and other parts. Aluminum is said to be stronger and less likely to be corroded than steel. Aluminum alloys are also easier to form, that is why aluminum parts require less labor costs. However, while labor cost is low, aluminum as a material is also expensive. It is in fact five times more expensive than steel.
The advantages of aluminum automotive part diecastings over steel parts outweigh its disadvantages. More and more manufacturers are experimenting with relatively expensive aluminum diecastings because it is lighter than steel. It makes the car leaner and faster. It also helps achieve fuel efficiency standards – since lighter vehicle means less fuel used. So the expensive material makes up for the cheaper fuel consumption of the car in the long run. There are several luxury models that are made with aluminum car frames. This is in fact a few times more expensive than steel cars but the user will be ensured that it would help save energy. Environmental advocates will love it more because it is almost a hundred percent recyclable – another standard that aluminum helps achieve.
Permalink: https://www.kineticdiecasting.com/kdc/aluminum-autoparts-diecastings/
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
Enclosures Boxes Castings
Automotive Die Casting Parts
Die Casting Handle Hardware
Tooling for Die Casting
Contact Kinetic Die Casting Company to get a price for aluminum die casting automobile parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Posted in Aluminum Die Casting, Auto Parts, Blogger, newsletter
Tagged #diecasting, #kineticdc, Aluminum Auto Parts, auto parts
Leave a comment
Heat Sink Diecastings
Die Casting Aluminum Heat Sink Castings. What is an aluminum heat sinks? They are usually fastened to electronic devices like those with integrated circuits to release heat when it is working. With that said, heat sinks need to have a wide surface area which will determine their capability to dissipate the heat.
Contact Kinetic Die Casting Company to get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures aluminum die castings creating aluminum die casting boxes, aluminum handle hardware, and aerospace die casting. If you would like to get a quote, please visit our website: Kinetic Die Casting Company
Posted in Aluminum Die Casting, Aluminum Heatsinks, newsletter
Tagged Aluminum Heatsinks
Leave a comment
