St Patrick’s Day is celebrated in the USA on March 17. St Patrick’s Day is not a legal holiday in the United States. This day widely recognized and observed throughout the country as a celebration of Irish and Irish-American culture. …
Continue reading
Category Archives: Aluminum Die Casting
REACH and RoHS 3 Compliant 2023
Kinetic Die Casting Company Parts use RECYCLED Materials and comply with the EU RoHS 3 standards. Die casting alloys have less than 0.1% of any of the REACH chemicals.
REACH
Registration: Chemical producers are required to register safety data for all chemicals produced.
Evaluation: Experts from member states and the European Agency evaluate safety data for higher volume chemicals and other chemicals of concern.
Authorization: Chemicals that are “substances of very high concern” (SVHC) are to be phased out and replaced with safer alternative chemicals.
Chemicals Restriction: Chemicals may be completely banned or some uses of the chemicals can be restricted
Aluminum die casting alloys: A360 A380 A383 A413
Silicon (Si) 9.0-10.0 7.5-9.5 9.5-11.5 11.0-13.0
Iron (Fe) 2.0 2.0 1.3 2.0
Copper (Cu) 0.6 3.0-4.0 2.0-3.0 1.0
Manganese (Mn) 0.35 0.50 0.50 0.35
Magnesium (Mg) 0.4-0.6 0.10 0.10 0.10
Nickle (Ni) 0.50 0.50 0.30 0.50
Zinc (Zn) 0.50 3.0 3.0 0.50
Tin (Sn) 0.15 0.35 0.15 0.15
Others 0.25 0.50 0.50 0.25
Aluminum (Al) Balance Balance Balance Balance
REACH and RoHS 3 Compliant 2023
Permalink: https://www.kineticdiecasting.com/kdc/reach-and-rohs-3-compliant-2023/
Aluminum Heatsinks for Your Convenience in 2023
Aluminum Heat Sinks for Your Convenience. Aluminum heat sinks have the ability to absorb and disperse heat from another object through thermal contact since aluminum has good electrical and thermal properties. This amazing characteristic makes aluminum heat sinks ideal for cooling purposes. An aluminum heat sink is a piece of molded aluminum usually placed on top of a processor. In most cases, you would first have to remove the heat sink before you would be able to see the processor.
Wherever a need for effective heat dispersal exists, there will undoubtedly be aluminum heat sinks installed. Refrigeration is the foremost industry that employs the use of heat sinks. The aluminum heat sinks produced these days come in various shapes, forms and sizes. The standard heat sink though, contains long fins and thin protruding extensions for directing the heat coming from the processor to the cooler setting inside the heat sink. Majority of today’s heat sinks available in the market are furnished with fans that blow cool air towards the fins to disperse the heat more efficiently. These fans are usually situated on top or in the middle of the fins.
Die Cast Aluminum Heat Sinks are designed in such a way that less machining is necessary. The production rate averages from 250 to 2,500 heat sink parts a day. Another great think with aluminum heat sinks is that they are completely lighter than their stainless steel equivalents, having a specific gravity of 0.10 pounds per cubic inch. They are also easily grounded since aluminum is electrically conductive.
Aluminum heat sinks are used in cell phones, motor housings, circuit boards, refrigerators, airplane parts, satellite components, automotive, lighting parts, microwaves, etc.
Kinetic Die Casting manufactures products like heatsink die casting, aluminum housings, and lighting fixtures. If you would like more information, please visit our website:Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Aluminum Parts or Plastic Parts
Military Die Casting Parts
Die Casting Tooling
Blogspot Kineticdiecasting
Die Casting Supervisor Job August 2023
08/10/2023 – For nearly 30 years, Kinetic Die Casting Company has been a small manufacturing company located in the Los Angeles, California area. We make aluminum die casting parts and zinc die casting parts for our manufacturing customers. We are looking to hire a Die Casting Production Supervisor. This is a full time job, 40 hours a week, for a person experienced in die casting supervision or manufacturing supervision. This person will sometimes assist with production scheduling, supervise die casting machine operators, supervise die casting machine setups, and supervise production personnel. This person should already live in Southern California to be considered. No job applicants from other countries will be considered.
Thank you. Contact us Soon
Kinetic Die Casting Company, Inc
(www.kineticdiecasting.com/)
6918 Beck Avenue
North Hollywood, CA 91605
Email Resume: sales@kineticdc.com
Call for an appointment: 818-982-9200
#hire #job #employment #diecasting #supervisor #manufacturing
Die Casting RFQs June 2023
Request for quotes start the process of our customers getting aluminum die casting parts from Kinetic Die Casting Company. The last few weeks we have received several RFQs (Request For Quotes). Each RFQ was a different material. One was two 6061 aluminum Heatsinks, another was A413 aluminum US Military Tank Part and another was a A356 aluminum antennae. To get a die casting part prices from us is simple.
We have a die casting request for price form:
https://www.kineticdiecasting.com/replyform.html
One way, is to send us a sample part of the part you need. Tell us how many you need. Tell us about your die casting tooling. We will give you a prices to use your tooling to make your parts.
Another way, is to send us a blueprint of your die casting part. Tell us how many you need per delivery and annually. We will quote die casting tooling and part price.
The simplest way, is to send us your die casting tooling and send us a copy of the purchase order to sales@kineticdc.com from your last time you ordered die casting parts. We will do our best to confirm your purchase order with the current metal price to match that part price and send you your die casting parts.
Kinetic Die Casting Company, Inc
https://www.kineticdiecasting.com
6918 Beck Avenue, North Hollywood, CA 91605
818-982-9200
sales@kineticdc.com
Low Volume Die Casting Supplier 2023
Kinetic Die Casting Company makes thousands of die casting parts every day. Some customers need 100,000 die casting parts a year. Others, fewer. KDC has a few types of customers that purchase lower quantity production die casting parts, less production parts or fewer die cast parts than the typical manufacturing company. Some customers order fewer than 100 die casting parts in a year. Once the die casting tooling is made, the cost to make a few castings is much less than when a manufacturer is getting started.
This manufacturing company customer buys 75 of these die casting parts on a purchase order.
We have a purchase order to make 200 of these parts and ship them in quantities of 7 parts up to 20 parts at a time.
https://www.kineticdiecasting.com/
Kinetic Die Casting Company is a Lower Volume and Lower Quantity Die Casting Supplier.
6918 Beck Avenue
North Hollywood,
California USA 91605
Phone Number:
818-982-9200
800-524-8083
sales@kineticdc.com
Office Hours: Monday – Thursday
8:30 AM – 4:30 PM (Pacific Standard Time)