Aluminum Plates are many times made by diecasting the part. This aluminum plate was die cast because there is a lot of detail on this side. This aluminum plate is very strong and can withstand thousands of pounds of force …
Continue reading
Category Archives: Blogger
Why Should You Use Aluminum Aircraft Parts in 2020?
Aircraft Parts
Why Should You Use Aluminum Aircraft Parts? We should use aluminum in aircraft parts because it is light in weight and low in density. The aluminum is actually alloyed with other kinds of metals to make it much tougher and stronger. This is often called durable aluminum.
Aluminum alloys that are used in the aerospace production are very strong and have the ability to act upon well in difficult and harsh settings. The 7075 Aluminum is the best choice for alloy when it comes to mechanized aircraft parts, and 5052 aluminum, which is not really as strong but is easier to weld, is also often used. The Aluminum 7075 is perfect for extremely stressed parts and is said to be the strongest kind of aluminum. It has excellent resistance to high temperature and corrosion, which are both important features in aircraft aluminum.
The 7075 and 5052 aluminum could be altered into billets, plates, sheets, rods, tubes, bars, and coils, which are useful in the construction of aircraft. Other substitutes to aluminum are wood, which is actually lighter in weight but weaker than aluminum. Aircraft metal should be very strong but also light in weight, and aluminum displays these necessities, which makes it the perfect selection for airplane parts manufacturing.
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Automotive Die Casting Parts
Die Casting Bracket Hardware
Airplane Die Casting Parts
Zinc Die Casting Company California
The Many Advantages of New Aluminum Aircraft Parts 2020
The Many Advantages of New Aluminum Aircraft Parts. For many years now, the military and commercial aircrafts are heavily relying on the use of cast aluminum. This metal basically makes up the 80% of the general structure of the plane by weight. Perhaps the reason why cast aluminum is so popular in the aviation industry is because it has the properties that are essential for an airframe. The new aluminum aircraft parts are currently being produced to meet the demands of today’s aircraft builders.
The use of aluminum aircraft parts has seriously created an impact on the aviation industry. For one, the manufactured parts allowed the builders to cut on material expenses. They are simply ideal for large-scale fabrication of airframes. Aircraft builders have found out that they will save more on manufacturing expenses if they utilize the new aluminum aircraft parts.
Aircraft parts that are made of aluminum are actually produced through the process of die-casting. The advantages of this procedure are clearly evident. Die cast aluminum parts have accurate dimensions just like the original pieces. Aside from that, they usually come out of the molds with smooth surfaces.
The die casting companies are the main producers of aircraft parts. They can customize and duplicate a variety of component parts for their clients. They manufacture different sizes and shapes, and they can even assist their clients in formulating new design concepts for their aircrafts.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a Los Angeles die casting company that manufactures aluminum and zinc parts. If you would like more information, please visit our website:Kinetic Die Casting Company
Aerospace Die Castings and Aircraft Die Castings
Die Casting Aerospace Parts
Airplane Die Casting Parts
Die Casting Aerospace Part Pictures
Airplane Die Casting Part Pictures
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Aerospace Parts Prices
Die Casting Molds 2020
Die Casting Molds. Aluminum die casting is the method for manufacturers to fulfill orders for large quantities of small to medium sized metal parts. This versatile process has been placed among the highest volume products made by the metalwork industry.
The process of die casting starts off with molten metal. This molten metal is then forced into the Die Casting Molds in a high pressure environment. After which, they are then machined into dies. This process results in the metal parts to be consistent in their dimensions, with high quality and good detail. For most of the time, die casting makes use of non ferrous metals such as tin, aluminum, zinc and copper among others but ferrous metals can also be used in this process. However, harder and stronger metals such as steel and iron cannot be used in this process; instead they are used to make Die Casting Molds.
These die cast molds come in a number of different shapes and sizes. Some can be made as single cavity molds which can make one part for every cycle or multiple cavity molds which can make several parts in a single cycle. Their shape and design would determine the cost of these molds; the more complex the design then the higher the cost of the mold would be. They can be very expensive, ranging from hundreds of dollars to thousands of dollars per mold.
When the molten metal is placed into the Die Casting Mold, they are then placed in either a hot chambered machine or cold chambered machine to complete the process.
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Die Casting Tooling and Die Casting Molds
Die Casting Tooling Information
Tooling Used in Die Casting
Frequently Asked Die Casting Questions
Die Casting Tile Molds
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Tooling Prices
The Advantages of Aluminum Golf Products over Steel 2020
The Advantages of Aluminum Golf Products Over Steel. Presently, more and more golfing and sporting stores are selling aluminum golf products. Compared to steel, aluminum is lighter. Because of its lightness, aluminum has been increasingly used in manufacturing shafts for golf clubs. Lighter shafts allow manufacturers of golf products to come up with slightly heavier golf heads. Since aluminum is not as heavy as steel, aluminum shafts enable golfers to swing faster and increase the ball’s distance with each shot. Additionally, despite its lightness, aluminum shafts still allow clubs to keep the optimal weighting needed for good balance. Like aluminum, there are certain types of steel that also provide golfers with a good feel. However, these steel types don’t really create the ball compression needed by golfers to achieve maximum ball distance.
Aluminum is also cheaper to produce and easier to mold than steel. Additionally, aluminum parts can be manufactured faster with less labor compared to steel. Many aluminum golf products include golf heads that are die cast in aluminum alloy, which is extremely hard and is appropriate for golf head production. In relation to cost, aluminum golf products are generally cheaper than those made from steel. Examples of golf products made from aluminum or with aluminum parts include golf carts with aluminum brackets, handles, and knobs, golf trolleys made with durable aviation-grade aluminum frames, golf retrievers, and golf ball heaters.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures a lot of aluminum rooftile plates , trim tile molds, and military die casting. If you would like a quote, please visit our website: Kinetic Die Casting Company
Posted in Blogger, Die Casting Alloys, Golf, newsletter
Tagged #diecasting, #kineticdc, Aluminum Alloys, Aluminum Die Casting, Die Casting Process
Leave a comment
