The advantages of Aluminum Audio Speaker Parts over plastic. If you are to match aluminum audio speaker parts against plastic audio speaker parts, which do you think is better? First of all, the first thing that you will notice with …
Continue reading
Category Archives: Blogger
Airplane Parts in Plastic or Aluminum
The Advantages of Aluminum Aircraft Parts over Plastic. On comparing aluminum die cast parts with plastic parts in terms of ability to recycle:
Plastic: Dilemmas concerning the plastic product’s ability to recycle came up by a nationwide task force, which called for plastics dealers abstain from using the worldwide symbol for recycling in ads, because it was considered as ambiguous in relation to plastics.
Aluminum: Almost all metals have constantly been readily recyclable. Die castings are never dangerous wastes and they never cause problems in management or reprocessing.
-
Plastic Parts:
- Plastic is more fragile than aluminum parts.
- Plastic is too bendable for a lot of purposes.
- Plastic is not dimensionally firm enough.
- Plastic does not normally perform well in warm conditions.
- Plastic does not act well with a lot of coatings.
- Plastic injection moldings do not obstruct radio frequency.
- Plastic does not obstruct electromagnetic discharge.
- Plastic injection moulded parts do not provide themselves simply for chrome plating.
Die Cast Aluminum Parts: - Die Cast Parts have higher level durability under weight than plastics.
- Die Cast Parts are totally defiant to ultra-violet rays.
- Die Cast Parts are totally defiant to riding out.
- Die Cast Parts are totally defiant to breaking in the incidence of diverse reagents.
- Manufacturing phases for creating die cast parts are much quicker than for injection molded parts.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote. Kinetic Die Casting manufactures die casting metal parts creating products like roofing tile molds, lighting parts, and military parts. If you would like more information about Kinetic Die Casting, visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
What is Die Casting?
Costs Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Permalink: https://www.kineticdiecasting.com/kdc/airplane-parts-in-plastic-or-aluminum
Posted in Aircraft Parts, Aluminum Die Casting, Blogger, Plastic Parts
Tagged #diecasting, #kineticdc, Aircraft Parts, Airplane Castings, aluminum, Manufacturing
1 Comment
Light Fixture Diecastings
Creating artificial light and setting the mood are the purposes of modern day lighting fixtures. Many lighting fixture parts are manufactured by die casting, a manufacturing process in which molten metal is forced into mold cavities. Die casting is beneficial if you are producing large quantities of small to medium sized lighting parts with good details,
Aluminum is lightweight and sturdy, a material often used to make lighting parts because of its durability and good thermal and electrical properties. Die cast aluminum lighting parts are made faster because they can be produced in net shape, meaning there are no welding or drilling methods needed after. Holes can be added to the mold cavities. These holes are necessary for the installation of covers or lids.
Lighting fixtures can be classified as indoor lighting fixtures and outdoor lighting fixtures. Die casting aluminum lighting parts are used in medical offices and parking garages for lighting fixtures. They are also used for bullet lighting fixtures, street traffic lights, outdoor and wall lighting fixtures. Furthermore, there are special light parts made for Aluminum lighting fixtures used for automobile lighting, marine lighting, medical lighting, and aerospace lighting.
Permalink: https://www.kineticdiecasting.com/kdc/light-fixture-diecastings/
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Box Enclosures
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Posted in Blogger, Lighting, newsletter
Tagged #diecasting, #kineticdc, aluminum lighting fixture, Lighting Parts
1 Comment
2018 AFS/NADCA Golf Tournament
AUGUST 17, 2018 Southern California NADCA CHAPTER 30 Golf Tournament at Los Serranos Country Club (North Course) | 15656 Yorba Avenue, Chino Hills, CA 91709. Come join us at our annual golf tournament!
California’s two largest metal casting chapters are coming together for a day of golf and networking. Over 135 industry professionals and suppliers participated last year. Join us August 17th for this exciting event.
Fun and Prizes:
– $5,000 putting contest;
– $10,000 hole-in-one chance;
– Long-drive challenge;
– Closest to the pin challenge;
– Plaques for 1st, 2nd and 3rd place.
Early Birds SAVE $50/golfer: Register before August 10th!
Registration includes green fees, range balls, cart, breakfast, snacks, lunch, give-away and door prize raffle ticket. Groups that register more than one foursome will receive a bonus chance at prizes. The 4-player, best ball, scramble style tournament is limited to 144 players.
6:30AM Check In and Breakfast | 8AM Shotgun Start | 12:30PM Lunch & Raffle | 3PM Conclude Event
Register On-Line:
www.afssocal.org
www.nadca30.org
Sponsorships and Tee Signs Available:
– GIVEAWAY SPONSOR—$2,000 (Includes 4 golfers and 1 tee sign): Every golfer receives a give-away when checking in. Shouldn’t it have your logo on it?
– LUNCH SPONSOR—$1,750 (Includes 4 golfers and 1 tee sign): The golf tournament lunch is the largest annual gathering of the Chapters. Be recognized as the sponsor of this event.
– DRINK CART SPONSOR—$1,500 (Includes 4 golfers and 1 tee sign): An obvious tournament favorite. Each golfer receives 2 tickets.
– $10,000 HOLE-IN-ONE SPONSOR—$1,000 (Includes 2 golfers and 1 tee sign): For many, this is the most anticipated hole of the tournament. Set up a table or tent and cheer on the participants. Note: Tournament hosts secure certificate of insurance for prize.
– $5,000 PRE-TOURNAMENT PUTTING CONTEST SPONSOR—$1,000 (Includes 2 golfers and 1 tee sign): Prior to the shotgun start, attendees compete to win $5,000. Note: Tournament hosts secure certificate of insurance for prize.
– SNACK BAG SPONSOR—$1,000 (Includes 2 golfers and 1 tee sign): All golfers receive a snack bag with your logo on it.
– BREAKFAST SPONSOR—$750 (Includes 2 golfers and 1 tee sign): The tournament starts early. Breakfast and coffee are the first things the golfers ask for before hitting practice balls.
– PRIZE HOLE-IN-ONE SPONSOR—$500 (Includes 1 golfer and 1 tee sign): Golfers tee off for big prizes such as airline tickets, TVs and more. Set up a table or tent and cheer on the participants. Note: Tournament hosts secure certificate of insurance for prize.
GET YOUR TEE SIGN!
TEE SIGNS @ $199 Before August 10th: Prominently display your support for the metal casting industry with a tee sign. Your name will be in bold lettering and placed at a hole throughout the tournament. EARLY BIRDS SAVE $50 Tee signs are $199 before August 10th or $250 after August 10th.
BRING A RAFFLE PRIZE:
At lunch, prizes will be announced and raffled off to attendees. Sponsors and tee sign supporters are asked to bring one (1) raffle prize.
We will announce your company and thank you from the podium. The industry lunch raffle is always a highly?anticipated event!
REGISTRATION FORM
Register and Pay On-Line at www.afssocal.org or www.nadca30.org
Enter Number of Golfers X $129/person (before August 10) or $175/person (after August 10)
Prepaid Mulligans (2) and Putting Contest (1 attempt): add $25/player | Lunch Only is $55/person
Tee Signs: $199/sign (before August 10) or $250/sign (after August 10)
Permalink: https://www.kineticdiecasting.com/kdc/2018-afs-nadca-golf-tournament/
#golftournament #nadca #diecasting
Posted in Blogger, Business, Competitors, Golf, newsletter, Supplier
Tagged #diecasting, American Business, Casting Metal, Golf, golf product, Golfing, NADCA
2 Comments
Closed July 4th 2018
Independence Day celebrates the signing of our Declaration of Independence on July 4, 1776. The Continental Congress declared that the thirteen American colonies regarded themselves as a new nation, the United States of America, and were no longer part of the British Empire. The Congress actually voted to declare independence two days earlier, on July 2.
Independence Day is commonly associated with fireworks, parades, barbecues, carnivals, fairs, picnics, concerts, baseball games, family reunions, and political speeches and ceremonies, in addition to various other public and private events celebrating the history, government, and traditions of the United States. Independence Day is the National Day of the United States.
Happy 4th of July 2018 from Kinetic Die Casting Company.
God Bless America
We are closed Wednesday, July 4th 2018 in celebration of our nations independence. We will be closed on Thursday and Friday also. We will be returning Monday July 9th for regular hours. God Bless America. We hope that your first half of the year was prosperous and also hope that you year continues to be prosperous.
Permalink: https://www.kineticdiecasting.com/kdc/closed-july-4th-2018/
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
818-982-9200
sales@kineticdc.com
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Posted in Blogger, Business, Customers, Kinetic Die Casting Company, newsletter, Supplier
Tagged #diecasting, #kineticdc, American Business, Holiday, Manufacturing
Leave a comment
Kinetic Lighting Parts
The aluminum die casting manufacturing process is quite similar to permanent mold casting. Both processes start out by melting or liquefying the aluminum, that is going to be used. The melted materials will then be injected into die cast molds castings. The liquid will then take the form of the patterns in the mold castings. The molds will then be allowed to cool down to harden and once they are opened, the product is finished. The difference between die casting and permanent mold casting is that the former uses high amounts of pressure in the molds so that the material will get into every part of the cavity. This results in better quality of the products which is why die casting is chosen to make Aluminum Lighting Fixtures.
Also, Aluminum Lighting Fixtures help in illuminating man made structures such as houses, buildings, tunnels as well as the streets at night. They are an essential part of these structures and a lot of them are needed. By using the die casting process, the bulk orders for these Aluminum Lighting Fixtures are met. Not only that, quality and consistency is insured by die casting. This is a cost efficient and effective way of producing Aluminum Lighting Fixtures.
Furthermore, Aluminum is a great choice for lighting fixtures as they are strong and can last a very long time. They are also very lightweight compared to other metals. Since they can be harvested almost anywhere, they are very cheap too.
Light Fixture Die Casting Parts
Kinetic Die Casting Company makes aluminum die castings as Lighting Fixture Die Castings. We make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
