Kinetic Die Casting Company (kineticdc) makes aluminum parts and zinc parts using diecasting tooling aka die casting tooling or die casting molds. There are several possible items that fall under the heading as tooling. In the following weeks, I will …
Continue reading
Category Archives: Die Casting Alloys
February 2023 NADCA Meeting
University of California – Irvine on February 1st and February 2nd. North American Die Casting Association (NADCA) will be hosting the Die Materials Committee meeting and R&D Committee meeting. This is a great opportunity for NADCA Chapter 30 members to listen to the latest updates on NADCA research, network with suppliers and die casters, and tour the lab at the University of California – Irvine. The meetings are free to attend, but we ask that anyone attending please RSVP using the following link, so that we can plan accordingly.
NADCA Die Materials Committee
Wednesday, February 1, 2023 from 8:30 a.m. to 3:30 p.m.
NADCA R&D Committee
Thursday, February 2, 2023 from 8:30 a.m. to 2:30 p.m.
The meeting will be held at University of California – Irvine, CA 92697
Register using this link: https://forms.gle/NKiF3gcBGNzAXWtj9
(if you cannot access Google Forms please send an email to glim@diecasting.org)
Beau Glim
Project Manager
North American Die Casting Association
847-808-3164
February 2023 North American Die Casting Association (NADCA) Meeting
REACH and RoHS 3 Compliant 2022
Kinetic Die Casting Company Parts use RECYCLED Materials in our die casting metal alloys. Kineticdc complies with the EU RoHS 3 standards. Die casting alloys have less than 0.1% of any of the REACH chemicals.
REACH
Registration: Chemical producers are required to register safety data for all chemicals produced.
Evaluation: Experts from member states and the European Agency evaluate safety data for higher volume chemicals and other chemicals of concern.
Authorization: Chemicals that are “substances of very high concern” (SVHC) are to be phased out and replaced with safer alternative chemicals.
Chemicals Restriction: Chemicals may be completely banned or some uses of the chemicals can be restricted
RoHS REACH Compliant
REACH and RoHS 3 Compliant 2022
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s chemical regulation that requires that chemical substances on their own, in preparations and all intentionally released substances from articles must be registered with the European Chemicals Agency (ECHA).
The regulation applies to substances manufactured in, or imported to the EU in annual quantities of 1 ton or more. According to the REACH requirements on Substances of Very High Concern (SVHC) a supplier of manufactured and imported articles shall provide customers with information on SVHC if they are present above a concentration limit of 0.1 % on an article level. SVHC will be defined through the list of candidate substances for authorization that is produced by the European Chemicals Agency.
Permalink: https://www.kineticdiecasting.com/kdc/reach-and-rohs-3-compliant-2022/
#RoHS #REACH #kineticdc #alloys
Die Casting Zinc Alloys in 2022
Die Casting Zinc Alloys
Die casting zinc alloys to offer castability, a broad range of excellent physical and mechanical properties, and finishing characteristics. The advantages of utilizing zinc alloys include thin walls, close dimensional tolerances, and variation in section design. Compared to others, die-casting zinc alloys have higher strength components.
The die maintenance is reduced and the die life is lengthened because of the lower temperatures under which zinc alloy is cast. There are several companies that manufacture a complete range of die-casting zinc alloys. One of them is the Eastern Alloys.
Die casting zinc alloys have high strength and hardness, which makes them ideal alternatives for machined, pressed, stamped, and fabricated items. Normally cast alloys are non-ferrous and there is a large number available with a wide range of physical and mechanical properties covering almost every conceivable application a designer might require. Die casting zinc alloys are among the most widely used because of their low melting point. Usually, low melting point alloys are cast in a hot chamber machine while intermediate and high melting alloys are cast in cold chamber machines.
One of the fastest and most cost-effective methods for producing a wide range of components is die casting. The major benefit from this process can be achieved if the designers were able to collaborate with the die caster at an early stage of product development and design. In order to help resolve issues that affect the tooling and production during the design phase, it is best to consult the die caster at the earliest possible time.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
A380 Aluminum versus A413 Aluminum 2022
The two more common types of die casting aluminum used by Kinetic die Casting Company are A380 aluminum and A413 aluminum. There are reasons to use either metal.
So here are a few of the details (http://www.kineticdiecasting.com/casting_aluminum.html):
A380
Availability – More
Material cost – Less
Flexibility – More
Thermal Conductivity – Less
Electrical Conductivity – More
Pounds/Inch – More
Pressure Tight – Less
Surface Polish – Less
A413
Availability – Less
Material cost – More
Flexibility – Less
Thermal Conductivity – More
Electrical Conductivity – More
Pounds/Inch – Less
Pressure Tight – More
Surface Polish – More
A380 is the most common die casting aluminum used worldwide. Most part blue prints do not call out the aluminum type so the default is A380.
Call Kinetic Die Casting Company at 818-982-9200 or send us an email with your questions at sales@kineticdc.com
There is a chart on this web page that give much more details:
Alloys for Aluminum Die Casting
Kinetic Die Casting is a california die casting companycalifornia die casting company that manufactures die cast parts. If you would like more information or request a quote, vist our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
What Are Die Casting Parts?
Die Casting Aluminum Heat Sinks
Aluminum Boxes Diecastings
Sponsored Listings:
House in Florida
