Cold Chamber Die Castings. Our knowledge had significantly enhanced through time; in this day and age, everything is doable. One of those methods that were bought upon by knowledge is die castings or aluminum die casting. This refers to the …
Continue reading
Category Archives: Die Casting Company
Drumheller Industries
Drumheller Industries specializes in zinc parts die casting. Drumheller uses primarily #3 zinc (zamak) for their zinc die casting parts. They are located at 10967 Tuxford Street in Sun Valley, California 91352. Drumheller Die Casting Company has been in business for over 50 years. Drumheller Die Casting has made die cast tooling for the zinc die casting parts. Drumheller uses only unit dies as their die casting tooling.
Mr. Drumheller built his own “Hot Chamber Zinc Die Casting Machines”. Drumheller served his customers in their Zinc Die Casting Part needs by building two different die casting machine sizes to accommodate the two most common unit dies used in die casting.
The Drumheller Die Casting Machine is very interesting. It is a “horizontal” die casting machine. In other words, the die casting mold lays down flat in the machine and opens “up and down” verses the customary machines opening “left and right”. These machines have a special feature that allows for the part to be “die trimmed” in the die casting production cycle. This trimming saves time and money in the production of die casting parts.
Kinetic Die Casting Company works with Drumheller Industries on some projects. Kinetic Die Casting Company is happy to be available to anyone in their zinc and aluminum die casting needs. Call us today if we can be of service:
818-982-9200.
Kinetic Die Casting can manufacture aluminum automobile parts, heat sinks, aerospace parts and much more. If you are looking for aluminum or zinc parts, visit our website Kinetic Die Casting Company
Aluminum Die Casting Parts from USA Die Casting Company
Aluminum Die Casting Parts from a USA Die Casting Company? Aluminum diecasting is the least expensive manufacturing process for producing high quantities of intricate aluminum parts. Aluminum die casting is a metal part manufacturing process in which molten aluminum is injected into a steel die or mold to produce up several thousand parts a week. Many times the die cast tool will produce over 100,000 parts before it will need to be replaced.
Aluminum Diecasting is a worldwide competitive manufacturing process. American businesses will search the world over for the lowest die casting prices; they will even order die castings from a non-American source to save a few dollars. These savings sometimes do not include the cost of excellence, the customs and freight charges, and finally, the cost of increased die casting inventory. Our quality and delivery of die castings are in many cases far superior. We not only save our customers the cost of inventory, in many orders our deliveries can be ahead of schedule.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures die casting metal parts creating products like roofing tile molds, lighting parts, and military parts. If you would like more information about Kinetic Die Casting, visit our website:Kinetic Die Casting Company
Jackson Die Casting LLC Plans to Hire 58 Workers
Jackson Die Casting LLC plans to expand its Madison County manufacturing facility, adding nearly five dozen jobs, the company and state officials announced today.
The high-pressure aluminum die casting company said its $4.5 million expansion in Jackson, Tenn. should result in the creation of 58 jobs over a three-year period.
“We’re fortunate to have booked significant new business from current and new customers, requiring us to invest significantly in equipment capacity and increase our employment,” said Bob Tamburrino, president of parent company Key 3 Casting LLC.
Key 3 Casting, based in Dallas, produces metal castings for industrial, aerospace, public infrastructure and automotive applications at the Jackson plant.
Hiring for the new positions will begin after Jan. 1, the company said.
(article from) The Tennessean
http://www.tennessean.com/article/20111214/BUSINESS/312140116/Plant-expansion-add-58-jobs-madison-County?odyssey=mod|newswell|text|FRONTPAGE|p
Comment for Kinetic Die Casting Company:
“Great news indeed. We are also experiencing a great deal of growth that will be announced over the next few months”
Contact us for details 800-524-8083 or 818-982-9200 http://www.kineticdiecasting.com
Kinetic Die Casting Company can manufacture aluminum car parts, aluminum hardware, and Aluminum Lighting Partsaluminum lighting parts
Die Casting Company for Sale
I had lunch today with the owner of a die casting company who expressed an interest in selling his die casting company. He does not want to sell his company but he may need to sell it if his sales continue to drop. His annual sales this year will amount to less than one fourth of his highest annual sales. He is too young to retire and he is concerned about his future. The reason he is talking to me today is that I purchased a few other die casting companies in the last few years. You can read more details from our Kinetic Die Casting Company History page.
In 2004 –
C&D Die Casting Company (C&D)
November 2004, C&D in Chatsworth, CA contacted KDC to help produce parts for customers. C&D produced insert tools for their customers in a special custom mold base. These mold bases were very difficult to replicate. C&D announced that they needed to go out of business and KDC purchased those special mold bases and tooling to make parts for the C&D customer’s.
In 2005 –
Spencer Die Casting Company (SDC)
In 2005, KDC contacted the owner of Spencer Die Casting Company, Tom Jordan, to see if he had a small die casting machine available for sell. Tom suggested that KDC come and look at his equipment and make an offer. Tom was frustrated with how the declining California Die Casting industry was effecting SDC. Tom offered to sell the entire assets of SDC to KDC. KDC purchased all the Spencer Die Casting Company assets. Spencer Die Casting Company closed their business.
In 2009 –
Coast Die Casting Company (CDC)
Richard White, the owner of Coast Die Casting Company contacted KDC to say he was ready to sell CDC. He had ran out of money to keep the doors open. July 2009. KDC purchased all the CDC assets. CDC sent all their mold bases and die casting tooling to KDC to continue to serve the CDC customers. Coast Die Casting Company closed.
Kinetic Die Casting Company is aggressively interested in purchasing other small die casting companies. Contact me if you are a small die casting company owner, and you are interested in getting out of the die casting business.
Bob Thomas, President
Kinetic Die Casting, Inc.
818-982-9200
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Posted in Die Casting Company
Tagged Business, Die Casting Company, Kinetic Die Casting Company
3 Comments
Dynacast Die Casting Company Acquisition
Dynacast Die Casting Company Acquisition – Charlotte, NC – July 19, 2011 – Dynacast International Inc. (Dynacast) announced the completion of the acquisition of the Dynacast business from Melrose PLC. The company’s acquirers are affiliates of Kenner & Company, Inc., a New York-based investment firm, together with Izurium Capital Management and a number of other institutional investors.
The completion of this acquisition puts Dynacast in a strong position for growth, backed by significant investor support and ample capital. Dynacast will continue to operate as an independent company led by its existing management team.
“On behalf of the executive team and the 3,000 employees of Dynacast worldwide, we are delighted at the prospect of working with Kenner & Company and the other investors,” said Simon J. Newman, CEO. “We believe that we have significant growth opportunities ahead of us and we are excited and confident that we will execute these opportunities over the next few years.”
Jeffrey L. Kenner, President of Kenner & Company, Inc. said he was pleased to complete the transaction and praised management for their enthusiastic support and business discipline. “We look forward to working together with Dynacast management to accomplish their growth objectives,” said Kenner.
Financing for the transaction was provided by JP Morgan, Macquarie Capital, GE Capital, and Bank of Montreal.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is located in North Hollywood,California. KDC specializes in manufacturing zinc and aluminum alloy casting parts. If you would like a quote, please visit our website:Kinetic Die Casting Company
Posted in Die Casting Company
Tagged Business, die casting, Die Casting Company, Manufacturing
Leave a comment
