The two more common types of die casting aluminum used by Kinetic die Casting Company are A380 aluminum and A413 aluminum. There are reasons to use either metal. So here are a few of the details (http://www.kineticdiecasting.com/casting_aluminum.html): A380 Availability …
Continue reading
Category Archives: Die Casting Parts
Aluminum Door Handles are Hardware 2020
Aluminum Door Handles
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Quality Standards
Die Casting Porosity
Die Casting Draft Angle
Die Cast Parts Company
Die Casting Fixtures 2020
Die Casting Lighting Fixtures
The main purpose of lighting fixtures or parts is to create artificial light. A lighting fixture consist of 0 parts—the light source, light reflector that directs the light to a certain point, an opening (with lens or without lenses), the light housing for protection, an electrical counterweight, and a cord connecting to the power source. Lighting fixtures can be classified as indoor lighting fixtures and outdoor lighting fixtures.
Before the introduction to an aluminum die casting company, lighting parts are made by welding pieces together. This process is costly, time consuming, and labor extensive. Nowadays, lighting parts are manufactured by die casting, a process wherein molten metal is forced into mold cavities. Die casting is beneficial if you are producing large quantities of small to medium sized lighting parts with good details,
Aluminum is lightweight and sturdy, a material often used to make lighting parts because of its durability and good thermal and electrical properties. Die cast aluminum lighting parts are made faster because they can be produced in net shape, meaning there are no welding or drilling methods needed after. Holes can be added to the mold cavities. These holes are necessary for the installation of covers or lids.
Die cast aluminum lighting parts are used in medical offices and parking garages for lighting fixtures. They are also used for bullet lighting fixtures, street traffic lights, outdoor and wall lighting fixtures. Furthermore, there are special light parts made for Aluminum lighting fixtures used for automobile lighting, marine lighting, medical lighting, and aerospace lighting.
Boxes and Enclosures 2020
Businesses have a lot of options to package their products, freebies, or marketing materials. These options include the usual cardboard, corrugated, plastic, set up, or wood boxes. Aside from these, a new option has been created in aluminum boxes. Aside from that, these aluminum boxes, aluminum enclosures or aluminum housings also have other uses.
These are boxes made out of aluminum alone or in combination with acrylic. The die casting companies can choose from any style like tote box, two-piece set up, or like CD/DVD boxes. The boxes can have details for aesthetics like laser etching, anodizing, and powder coating.
Aluminum Housings, aluminum enclosures and aluminum boxes are all quite associated in that they cover something as packaging media. These aluminum boxes can conduct electricity so that means it can easily get grounded. Aluminum Boxes, Aluminum Enclosures and Aluminum Housings for Packaging and for Protection
Most of these boxes are aluminum die castings because the production entails lesser labor requirements and the production process is much faster. What’s more, these aluminum castings weigh lighter that the steel fabricated parts.
Depending on how big or heavy the parts are, about a few hundreds to a few thousands of these can be produced every day. These aluminum boxes or aluminum housings are usually used for: engine enclosures for automobiles and trucks, housing for computer disk drives, motors, communication companies, car transmission housings, and for electrical junction boxes.
Aside from using Aluminum Enclosures for packaging of retail products, they are used as enclosures for electronic products that are sensitive to dust, moisture, or sudden impact. These aluminum boxes are used to protect the items from damage of any sort.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Handle Hardware
Die Casting Alloys
Die Casting Aluminum Alloys
Aluminum Part Castings Company
Aluminum Car Radiators 2020
Aluminum Car Parts
A small leak on your car Radiator can be indicating a larger problem. A cooling system that runs low too often is less efficient and you can damage your cooling system by letting the coolant level get too low. Too little coolant flow can be bad, but at normal and high operating temperatures, the rate at which coolant moves through the radiator does not change the amount of heat that is dissipated by the cooling cores. The amount of cooling will not be reduced even when the mean temperature of the coolant rises and flows faster.
Many cheap coolants do not have the corrosion protection, PH balancing, or sediment prevention that the top-quality coolants do. These low quality coolants do not have the same additives of name brand coolants. To help your engine stay cooler, rev up your engine slightly when you are overheating in traffic to help push more air across the cooling cores and more coolant through the engine.
All water-cooled car radiator parts have an automatically controlled electric fan on the radiator. The way the system is supposed to work is that, after the engine is started, the thermostat on the engine stays closed until the coolant temperature at the ENGINE reaches 87C (189F) degrees. It is the responsibility of the Radiator to keep the coolant temperature from running too high. However, if the temperature is too high it is not necessarily the radiator.
A poor radiator cap will not last as long or stay properly calibrated, and either open at too low or two high a pressure. Make sure your radiator cap is the proper one for your cooling system. Higher pressure means a higher boiling point, which means more efficient cooling. A new radiator cap is usually all that is required for this (but don’t over pressurize your radiator cores and wreck the whole system).
Most Car Radiators’ cooling system failures arise from poor radiator maintenance. Many radiator problems can be prevented with regular maintenance and periodic professional inspections of you car radiator and cooling system. The most common radiator problems are: leaky fittings or seams, fin deterioration and bond failure, electrolysis, cracked tank, and fan damage.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Aluminum Parts or Plastic Parts
Military Die Casting Parts
Die Casting Tooling
Blogspot Kineticdiecasting
Aluminum Auto Parts and Car Parts 2020
Auto Parts and Car Parts and Automotive parts. Car Parts or Auto parts in aluminum are 1/3 the weight of steel parts. Aluminum auto parts are formed from a few hundred to thousands of auto parts a day. Many features of the automotive part are manufactured “net shape” to save the cost of useless materials and the additional labor of machining. Mounting holes are usually produced into the aluminum auto part during production. also saving cost. Many of the primary “tier one” automotive manufacturers have their own manufacturing plants. They also purchase aluminum automotive parts from companies such as Kinetic Die Casting Company.
Good news for Chevy parts, Toyota parts, Nissan parts, Honda parts and Jeep parts users! Auto Parts Train, the country’s leading auto parts dealer is now selling these top quality auto parts at the lowest prices. While you get satisfied from the auto parts’ superior quality and performance, you can also save from Auto Parts Train’s hottest deals on these products. Up to 50% discounts are offered plus you get more choices as Auto Parts Train includes auto parts for older and the most recent models.
http://www.kineticdiecasting.com/automotive_part_pictures.html
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Die Casting Auto Parts
Die Casting Car Parts
Manufacturing Die Casting Parts
Aluminum Die Casting Company
Photos Die Casting Car Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Automotive Parts Prices
Posted in Auto Parts, Blogger, Die Casting Parts, newsletter
Tagged #diecasting, Aluminum Auto Parts, auto parts, automotive, die casting, Manufacturing
Leave a comment
