Choosing Aluminum Die Casting in Military Parts. Military parts equipment is very important because the success of different military operations slightly depend on the equipment that they use. With this very reason, producing military equipment should be very careful to …
Continue reading
Category Archives: Die Casting Parts
Who uses die casting parts?
Who uses die casting parts? It may come as a surprise to the average lay person, but the market for die casting parts is big enough that it is able to sustain the industry as well as the people who partake in it. But for those who are planning on establishing a business that deals with die casting, you might ask, is die casting good enough to be run as a business? Who are the people who use die casting parts?
Usually, customers from various industries usually need competitively priced die cast parts that is made up of a number of different metal alloys. Most of these customers are Original Equipment Manufacturers who use the different medium and small-sized casting parts to manufacture the products they sell in the general market. This means that at most, the people who use die casting parts expect die casting companies to rapidly produce and ship the parts on time without any sight of defects.
It is not mind boggling that the applications of die casting can extend to a number of different fields and industries. The utility or the process is important in these industries because die casting makes it possible to produce large volumes of small casting parts used to produce different goods.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures die casting metal parts creating products like roofing tile molds, lighting parts, and military parts. If you would like more information about Kinetic Die Casting, visit our website:Kinetic Die Casting Company
Kinetic Die Casting is a aluminum and zinc die casting company. If you would like to know more information, please visit our website:Kinetic Die Casting Company
Die casting parts: Using Hot-chamber machines in die casting
Die casting parts: Using Hot-chamber machines in die casting. In order to successfully produce great quality die casting parts, two-types of die casting machines are used, the hot chamber machines, also known as gooseneck machines, and the cold chamber machines. The efficiency of each machine is measured by their ability to apply the needed clamping force for casting. Standard ratings may range from 400 to 4,000 short tons. This article is going to outline the process involved in using a hot-chamber machine for die casting.
Hot-chamber machines works to feed the die by relying on a pool of molten metal. With the start of each cycle, the machine piston is withdrawn and allows the molten metal to rapidly fill the gooseneck. This is also the reason why this is also called a gooseneck machine. The piston, either powered by oil or gas, then pushes the molten metal out of the gooseneck and directly into the die. This system is preferred because of the relatively fast and rapid cycle times it is able to accomplish and the ease by which the metal is conveniently melted within the casting machine. Because the system cannot employ metals with high melting points, and since it cannot also employ aluminum because of its ability to absorb some of the iron in the cast, the hot-chamber machines usually uses tin, zinc and lead based alloys.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting makes great quality aluminum, and Zinc Die Casting If looking for a job or would like a quote please visit our website:Kinetic Die Casting Company
Posted in Die Casting Parts
Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts
1 Comment
Die casting parts: The steps involved in the process of die casting
Die casting parts: The steps involved in the process of die casting. During the die casting process, these are the basic steps that are being followed.
The first part involves spraying the mold with lubricant. This enhances the removal of the casting later on, and at the same time helps control the temperature of the die. The mold is then closed and then molten metal is introduced into the die under high pressures ranging from 1,500 to 25,000 psi. The die is then filled completely, and the pressure is constantly checked and maintained until the casting has securely solidified. The die is then opened, and the shot are then ejected by the use of ejector pins. Shots differ from castings since there are a number of multiple cavities within a die, producing multiple castings in one shot. Ultimately, the scraps are separated from the casting. Scraps include the gates, sprues, runners and flash. The scraps are usually removed by the use of a special trim die located inside a hydraulic or power press.
A more conventional method is employed by separating the scraps by sawing or by hand. This often requires grinding in order to smoothen out the scrap marks. Scraps that come off from this process are usually recycled by re-melting and are then used up again in another die casting process.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting can manufacture aluminum automobile parts, heat sinks, aerospace parts and much more. If you are looking for aluminum or zinc parts, visit our website Kinetic Die Casting Company
Examples of Die Casting: Die Casting 101
Examples of Die Casting: Die Casting 101. When talking about the process of molding metal, the best method to use is die casting. Die casting involves employing molten hot metal and forcing it under high pressure and then pouring it into mold cavities. The most common metals used for die casting are usually non-ferrous metals; these include zinc, aluminum, magnesium, copper, lead, tin, and pewter-based metal alloys. Even though, castings made of iron are possible, this is impractical since iron is a much more difficult metal to manipulate than the others and because it cost more.
The die casting method is especially designed for applications where there is a need for large numbers of medium to small sized parts needed. Die casting method is preferred over all the others since it preserves the surface quality of the metal and at the same time its dimensional consistency.
The flexibility and versatility that come with employing die casting has made it one of the fields of metalworking that has achieved the greatest volume products made in the industry. The science of die casting has evolved to also include injection-molded parts made up of plastic. Plastic is replacing metal die casts since it is cheaper and lighter and is a perfect alternative if the die cast does not require strength or hardness.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting Company can manufacture aluminum car parts, aluminum hardware, and Aluminum Lighting Partsaluminum lighting parts
Why Should You Use Aluminum Speaker Parts?
Why Should You Use Aluminum Speaker Parts? According to Alon Wolf, the master craftsman of speakers, many speaker manufacturers commit the mistake of using medium-density fiberboard (MDF) for their speaker enclosures. He considers using anything other than aluminum for speaker parts a big no-no because aluminum is the most appropriate material for building speakers. The basic rule for a box is that it should be stiff and well-damped and have mass. Compared to aluminum, MDF may be well-damped but it is not very stiff. It is also neither hard nor heavy as it is made up of glue and resin. Additionally, when a driver is attached to an MDF box, the MDF ends up absorbing a lot of the energy or sound that the driver is releasing. As the driver puts out energy, the MDF box continues storing the sound, which keeps building up until listeners can hear the box flexing. In the end, the results are not particularly impressive and may even be annoying to the ear. Aluminum, on the other hand, passes with flying colors when it comes to building speaker parts as the material is well-damped, stiff, and heavy enough to give a speaker box the mass that it needs. Also, aluminum speaker parts do not limit the energy that a driver puts out. When a driver is joined to a well-damped aluminum enclosure, the sound that the speaker emits is in its purest form as the aluminum speaker parts allow the driver’s energy to come out freely. This results in listeners hearing things that they otherwise wouldn’t hear from an MDF box.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting Company can manufacture aluminum car parts, aluminum hardware, and Aluminum Lighting Partsaluminum lighting parts
Posted in Die Casting Parts
Tagged aluminum, Audio Speakers, Die Casting Company, Die Casting Parts, Diecasting Process
6 Comments
