Sunday, November 4, 2018 ENDS California Daylight Savings Time. At 3:00 AM move your clock back one hour to 2:00 Sunday, November 4, 2018 Fall Back (Move Your Clock Backward One Hour) Permalink: https://www.kineticdiecasting.com/kdc/end-daylight-savings-2018/ “The Parts We Make Today, We …
Continue reading
Category Archives: Diecasting Process
Aluminum Die Casting Radiator: Aluminum Die Casted Car Parts: 2020
Aluminum Car Part
Your car radiator is the primary cooling mechanism for your engine. Radiators are a simple and elegant solution to the need for engine cooling. Car radiator parts are mostly made of aluminum. Light and strong, aluminum is great for making car radiators. It is the material of choice for most of today’s radiators. Light and intelligently designed, aluminum radiators are standard on many of today’s new cars and trucks. Aluminum Car Parts
A small leak on your car Radiator can be indicating a larger problem. A cooling system that runs low too often is less efficient and you can damage your cooling system by letting the coolant level get too low. Too little coolant flow can be bad, but at normal and high operating temperatures, the rate at which coolant moves through the radiator does not change the amount of heat that is dissipated by the cooling cores. The amount of cooling will not be reduced even when the mean temperature of the coolant rises and flows faster.
Many cheap coolants do not have the corrosion protection, PH balancing, or sediment prevention that the top-quality coolants do. These low quality coolants do not have the same additives of name brand coolants. To help your engine stay cooler, rev up your engine slightly when you are overheating in traffic to help push more air across the cooling cores and more coolant through the engine.
All water-cooled car radiator parts have an automatically controlled electric fan on the radiator. The way the system is supposed to work is that, after the engine is started, the thermostat on the engine stays closed until the coolant temperature at the ENGINE reaches 87C (189F) degrees. It is the responsibility of the Radiator to keep the coolant temperature from running too high. However, if the temperature is too high it is not necessarily the radiator.
A poor radiator cap will not last as long or stay properly calibrated, and either open at too low or two high a pressure. Make sure your radiator cap is the proper one for your cooling system. Higher pressure means a higher boiling point, which means more efficient cooling. A new radiator cap is usually all that is required for this (but don’t over pressurize your radiator cores and wreck the whole system).
Most Car Radiators’ cooling system failures arise from poor radiator maintenance. Many radiator problems can be prevented with regular maintenance and periodic professional inspections of you car radiator and cooling system. The most common radiator problems are: leaky fittings or seams, fin deterioration and bond failure, electrolysis, cracked tank, and fan damage.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include Ricon V2-AC 090 Cam Arms, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Light Fixture Die Casting Parts
Photos Die Casting Parts
Aerospace Die Casting Parts
Roofing Tile Molds Blog
Posted in Aluminum Die Casting, Auto Parts, Die Casting Company, Die Casting Parts, Diecasting Process
Tagged #diecasting, #kineticdc, aluminum, Aluminum Auto Parts, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts, auto parts, car parts, Diecasting Process, Kinetic Die Casting Company
Leave a comment
Aluminum Aircraft Parts Die Casting 2020
AIRCRAFT PARTS ALUMINUM DIE CASTING
Aircraft Die Cast Part1
If you happen to look above and you see a fast fighter plane equipped with modern design and armed with missiles, you’ll surely say that it’s from the United States. The United States is the leader in aircraft manufacturing. The country is supported by an array of fighter planes for national security and defense. But how did they build aircrafts? Well, those aluminum airplane parts are made because of die casting.
What is a die casting company anyway? Die casting is the process of forcing molten metal under high pressure into mold cavities. Most are made from copper, zinc, aluminum, lead, magnesium, tin and lead based alloys it is used for applications where small parts need to be given a good detail or a perfect surface quality. Furthermore, in aircraft die casting magnesium and aluminum are the commonly used metals because they are lightweight and can operate in different conditions.
Magnesium alloy castings showed corrosion resistant performance. Other than that, magnesium alloys are light weight, low density and it can operate at high temperature. There are several magnesium alloys that can be found in an aircraft such as the RZ5 alloy in helicopter transmission casings and WE43 alloy for the castings of the main rotor gearbox.
Aluminum on the other hand remained to be the most popular alloy used on aircrafts. The parts of aircraft that uses aluminum alloy are door handle ducts, boxes, brackets, quadrants, clips, doublers, wave guides, wing and the body.
Aircraft parts die casting have gone along way. Although aluminum and magnesium are the popular metals used in aircrafts, others are still looking for other options like titanium.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
What Are Die Casting Parts?
Die Casting Aluminum Heat Sinks
Aluminum Boxes Diecastings
Kinetic Die Casting SEO
Posted in Aircraft Parts, Aluminum Die Casting, Die Casting Company, Die Casting Parts, Diecasting Process, Kinetic Die Casting Company
Tagged #diecasting, #kineticdc, Aircraft Parts, Airplane Castings, Airplane Parts, aluminum, Aluminum Die Casting, die casting, Die Casting Parts, Die Casting Process, Die Castings, Diecasting Process, Kinetic Die Casting Company
Leave a comment
Die Casting Alloys 2020
Die Casting Alloys. A die casting is a method engaged by the metalworking industry to produce and construct metal parts that are good die casting. It is a way of pushing melted metal into reusable molds under high pressure. Flexible alloys are utilized to manufacture a die. The most frequent die casting alloys are zinc, aluminium, magnesium, copper, lead and tin.
Die casting alloys are selected depending on the rewards they have to recommend to manufacturers. Here is how ordinary die casting alloys are distinguished:
- Zinc
- It is typically cheaper to utilize for little parts. It is easiest to cast owing to its high ductility. Zinc is also without difficulty plated and has high impact strength while promoting long die life.
- Aluminium
- Aluminium is lightweight but has high dimensional stability for multifaceted shapes and narrow walls. It is the most universally utilized of all die casting alloys because of its excellent corrosion resistance, first-rate mechanical properties, high thermal and electrical conductivity and it maintains its strength at high temperature.
- Magnesium die casting
- This is the simplest alloy to machine and has an exceptional strength-to-weight ratio. This is the lightest alloy to be utilized in die casting.
- Copper
- This has high hardness and corrosion resistance. It has the highest mechanical properties amongst other die casting alloys. It has outstanding wear resistance and dimensional constancy.
- Lead and Tin
- Both have high density. And create tremendously close dimensional accuracy. It is frequently utilized for its particular forms of corrosion resistance.
There are other die casting alloys apart from the aforementioned. Picking the correct alloy to utilize will seriously depend on its features.
Kinetic Die Casting is located in Southern California. KDC specializes in aluminum and zinc die casting tooling. If you would like a quote, please visit our website:Kinetic Die Casting Company
E-mail sales@kineticdc.com
Permalink: https://www.kineticdiecasting.com/kdc/die-casting-alloys-2020/
Die Casting Alloys
Die Casting Alloys
Die Casting Metals and Technical Terms
Die Casting Technical Information
Die Casting Aluminum Parts
Die Casting Zinc Parts
Cast Parts Diecasting Prices
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices
Cast Parts 2020
Cast-Parts is an American die casting company located in California, USA. Cast-Parts produces aluminum diecast parts and zinc diecast parts using a process called “High Pressure Die Casting Process”. The high pressure die casting process is where a molten metal alloy is injected using high pressure into a die casting mold or diecasting die to make metal diecast parts.
This die casting process is enabled by the use of high pressure die casting machines. The Die Casting Machines that Cast-Parts uses are computer-aided production controled to produce and ship cast parts to our customers on time. We will usually ship quality products in four weeks from the time the order is placed. We can expedite some cast part shipments in less than two weeks.
Our cast parts die casting machines range up to 650 tons to make parts in aluminum die casting parts from .001 pounds to 5 pounds. Our zinc die casting parts range from less than an ounce to over a few pounds. We make many types of die cast parts from less than an ounce up to a ten pound shot.
To comment please email Cast-Parts sales@Cast-Parts.com.
Cast Parts Die Casting Company
Die Casting Parts Process
Die Casting Part Types
American Die Casting Company USA California
Die Casting Tooling Prices Request
Die Casting Tooling
Die Casting Part Prices and Cast Parts Contact Page
Die Casting Alloys for High Pressure Die Casting
Site Map Page for Cast Parts Die Casting Company
Links for Cast Parts Resources listings
Die Castings Blog for Cast Parts Die Casting Company
Posted in Blogger, Business, Diecasting Process
Tagged Diecasting Process, Manufacturing
Leave a comment
For Large Industries: The Process of High Pressure Die Casting
For Large Scale Industries: The Process of High Pressure Die Casting. The process of high pressure die casting is popular among large scale production lines. It is considered as one of the most cost effective and fastest metal working process, when compared to forging, sand casting and other types of machining. Traditional die casting is also called high pressure die casting because the molten metal is forced into the mold cavity by using high pressure.
The mold cavity is formed by two halves. They are the cover die and the ejector die. The section where the two halves meet is called the parting line. During casting, molten metal is injected between the dies. The metal is allowed to flow through an opening in the cover die half. High pressure, between 10 to 175 mPa, is maintained until the molten metal solidifies. This process of high pressure die casting ensures uniform solidification of the final product. Hence, it produces uniform work pieces with high yield strength. There are two types of the method: cold chamber and hot chamber casting. The choice depends on the melting point of the metal. For example, zinc and aluminum alloys can only be processed in cold-chamber environments.
The process of high pressure die casting has many applications, ranging from the toy industry to automotive and computers. The technique also minimizes, if not totally eliminates, post-machining like sanding or grinding. Therefore, there are less post-production costs. However, this technique is only recommended for large scale businesses. The initial cost of construction of dies, due to painstaking details and strength, is relatively higher than other machining processes.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at E-mail sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures aluminum die castings creating aluminum die casting boxes, aluminum handle hardware, and aerospace die casting. If you would like to get a quote, please visit our website: Kinetic Die Casting Company
Kinetic Die Casting manufactures products like heatsink die casting, aluminum housings, and lighting fixtures. If you would like more information, please visit our website:Kinetic Die Casting Company
Die Casting Process
What is Die Casting?
Aluminum Die Casting Prices
Why Should You Use Die Castings?
Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices
