Die Casting: Some Questions Answered. What is a die? A die is also sometimes called a mold, is tooling to produce die cast parts. A die cast tool is a metal block tool used to make die casting parts. What …
Continue reading
Category Archives: Diecasting Process
Metal Flow Video 2017
Kinetic Die Casting Company (www.kineticdc.com) uses software to check Heat Sink Metal Flow into Mold or Die Casting Tooling. Aluminum Heat Sink for the lighting industry. Two cavity aluminum heat sink die casting molds. 818-982-9200 (music provided by YouTube)
Permalink: https://www.kineticdiecasting.com/kdc/metal-flow-video-2017/
Kinetic Die Casting Company
E-mail sales@kineticdc.com / 818-982-9200 / 800-524-8083 Toll Free / 818-982-0877 Fax
6918 Beck Avenue, North Hollywood, California USA 91605,
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
High Pressure Die Castings
What is the High Pressure Aluminum Die Casting Process?
The image pictured above depicts a Cold Chamber Die Casting Machine as it makes parts. The term “Cold Chamber Die Casting” refers to a separate metal melting furnace. The High Pressure Die Casting, cold chamber die casting process follows this sequence:
1. Look at the image above
2. The die casting machine opens the die casting mold.
3. The prior part is removed and the die cast mold is sprayed for the next part
4. The aluminum is poured using a ladle into a shot cylinder
5. The shot piston injects the metal into the die casting mold.
6. The machine opens and the process starts again.
For more details, look at this webpage: http://www.kineticdiecasting.com/what-is-die-casting.html
Kinetic Die Casting Company
6918 Beck Avenue, North Hollywood, CA 91605
Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
sales@kineticdc.com
Permalink: https://www.kineticdiecasting.com/kdc/high-pressure-die-castings/
2017 KDC Jobs
Kinetic Die Casting Jobs Employment Opportunities 2017
Kinetic Die Casting Company is sometimes looking to hire good die casting people to fill our available die casting job positions. We employ people and hire people in several positions from entry level die casting team members to very experienced die casting production managers.
- If you are unemployed and you have die casting job skills, contact us.
- If you are not getting 40 hours working in a die casting company, contact us.
- If you are looking for a future job in manufacturing, contact us.
- If you feel that you are under-utilized where you are working, contact us.
(Click Here).. How to get a Job at Kinetic Die Casting Company.
PDF to “Download” and print ===> 
The list of die casting jobs below does not include every possible die casting job. There are many names job titles for the following: die casting machine operator job, die casting part trimmer, die casting metal handler, die casting machine repair, die casting lead job, die casting part quality inspector, die casting foreman, die casting manager, die casting part sander, automation set up, sprayer setup, ladeler setup, extractor setup, automatic die casting machine setup, die casting machine set up job, and die casting team members.
Permalink: https://www.kineticdiecasting.com/kdc/2017-kdc-jobs/
Please email, fax or mail your Work Resume and Salary History to the fax number, email address or mailing address listed on this page.
Kinetic Die Casting Company
6918 Beck Avenue North Hollywood, California, 91605, USA
800-524-8083 or 818-982-9200 or fax 818-982-0877
Posted in Blogger, Die Casting Company, Diecasting Process, Kinetic Die Casting Company
Tagged #diecasting, #kineticdc, Jobs
6 Comments
Sand Castings in 2017
What is Sand Casting? Sand casting is a metal part manufacturing process that uses sand as the form or mold that shapes the metal castings. In sand casting, the sand is moistened and the pattern is pressed into the sand. The preparation and bonding process of the sand is the most critical step in the process. This technique is usually used for low volume production.
The sand casting pattern is made of wood or metal, such as aluminum. The patterns are generally not destroyed but are made permanent to be reused up to a few thousand times. Sand casting is used when lower quantities are needed and lower quality is acceptable. Manufacturing companies use sand casting to make aluminum parts if the project only needs a few hundred parts.
Permalink: https://www.kineticdiecasting.com/kdc/sand-castings-in-2017/
Kinetic Die Casting Company sales@kineticdc.com
6918 Beck Avenue North Hollywood, California, 91605, USA
800-524-8083 or 818-982-9200 or fax 818-982-0877
Posted in Blogger, Die Casting Parts, Diecasting Process, newsletter
Tagged #diecasting, #kineticdc, Die Casting Process, Sand Casting
1 Comment
California Die Casting Congress 2017
January 18-19, NADCA is excited to announce the first ever California Congress at the Hilton Long Beach. The Congress will feature technology highlights of our Congress in Columbus earlier this fall. It is important to use that all our members are able to access this information prevalent to the advancement in the industry. The event will kick off with a cocktail reception on January 18 and lead into a full day of presentations on January 19. The Congress will be sponsored by a limited number of Suppliers that attendees will be able to meet with to learn more about products and services available to the die casting industry. The cost is just $20 for NADCA Members and $50 for Non-Members*. Contact Melisa Ryzner if you are sending more than 5 people to receive discounted pricing.
Tentative Event Agenda*
Wednesday, January 18, 2017 – Cocktail Reception – 5:30 – 7:00 pm
Thursday, January 19, 2017 – Breakfast – 7:30 – 8:30 am
Congress Presentations – 8:30 am – 4:30 pm
8:30-10:00 AM – State of the Die Casting Industry
Additive Manufacturing and New Materials for Die Components with Improved Heat Extraction
New Surfacing Material DHW: From Repair Welding to Additive Manufacturing in Die Casting Molds
Additive Manufacturing for Casting Shot End Systems
Presented by Steve Udvardy, North American Die Casting Association
10:15-11:15 AM – Die Casting Alloys that will Allow the Die Caster to Compete with Alloys A356, A357, 358 and 359 In PM Applications. Strontium Aluminate Replaces Alumina on Aluminum Melts at 500 ppm Sr and Provides Die Soldering Resistance. Hypereutectic Al-Si-Mg-Sr Alloy with a Unique mcrostructure and Improved Ductility.
Presented by Dr. Raymond Donahue, Mercury Marine
Lunch 11:45-1:15 PM
1:15-2:45 PM – The “Gating Equation” Updated Fluidity from a Heat Transfer Perspective
Multi-time Scale Systems and Quasi Equilibrium Presented by Dr. R. Allan Miller, The Ohio State University
3:00-4:30 PM – An Investigation of the use of PVD Die Coatings to Minimize or Eliminate Lubrication during High Pressure Die Casting Evaluation of Die Lubricant Performance Preliminary Study on Ejection Force Prediction Presented by Beau Glim, North American Die Casting Association
Hilton Long Beach
701 W Ocean Blvd
Long Beach, CA 90831
Event Rate: $20 NADCA Members, $50 Non-Members
*Registration includes access to the cocktail hour as well as breakfast and lunch on January 19.
Contact: Melisa Ryzner, CMP, NADCA Education & Meetings Manager, 847-808-3161
Register: http://www.diecasting.org/store/events/registration.aspx?event=conwest
Permalink: https://www.kineticdiecasting.com/kdc/california-die-casting-congress-2017
Posted in Blogger, Business, Competitors, Die Casting Parts, Diecasting Process, newsletter, Supplier
Tagged #competitor, #diecasting, #kineticdc, Die Casting Company, Manufacturing, NADCA
Leave a comment
