We will be closed from 2PM on 12/21/2017 until 8AM on 01/02/2018. Please send your emails to sales@kineticdc.com and we will respond to them when we return on the 2nd. We wish you a Merry Christmas and a very Prosperous …
Continue reading
Category Archives: Aluminum Heatsinks
Aluminum Heat Sink Metal Flow Video 2017
Kinetic Die Casting Company (www.kineticdc.com) uses software to check Heat Sink Metal Flow into Mold or Die Casting Tooling. Aluminum Heat Sink for the lighting industry. Two cavity aluminum heat sink die casting molds. 818-982-9200 (music provided by YouTube)
Permalink: https://www.kineticdiecasting.com/kdc/metal-flow-video-2017/
Kinetic Die Casting Company
E-mail sales@kineticdc.com / 818-982-9200 / 800-524-8083 Toll Free / 818-982-0877 Fax
6918 Beck Avenue, North Hollywood, California USA 91605,
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Metal Flow Video 2017
Kinetic Die Casting Company (www.kineticdc.com) uses software to check Heat Sink Metal Flow into Mold or Die Casting Tooling. Aluminum Heat Sink for the lighting industry. Two cavity aluminum heat sink die casting molds. 818-982-9200 (music provided by YouTube)
Permalink: https://www.kineticdiecasting.com/kdc/metal-flow-video-2017/
Kinetic Die Casting Company
E-mail sales@kineticdc.com / 818-982-9200 / 800-524-8083 Toll Free / 818-982-0877 Fax
6918 Beck Avenue, North Hollywood, California USA 91605,
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Fun Facts About Aluminum
Aluminum (Al) is the most abundant mineral on Earth after oxygen and silicon and is the most abundant metal found naturally on Earth. It is present in 270 minerals. Aluminum is a silver, soft metal with an atomic number of thirteen and thirteen protons in the nucleus. It constitutes about eight percent of the Earth’s land mass.
Aluminum (aka Aluminium) fun facts:
- Caution – Iodine and Aluminum powder plus a few drops of water create: Clouds of toxic purple iodine vapor and a flame.
- Recycling aluminum takes only 5 percent of the energy needed to extract new aluminum from ore.
- Aluminum is globally the most used metal that does not contain iron.
- Aluminum is almost always used as an alloy, even if the aluminum content is as high as 99%.
- The most commonly used elements to combine with aluminum to create an alloy are zinc, copper, silicon, magnesium, and manganese.
- This element is the second-most abundant metallic element in Earth’s crust after silicon.
- Aluminum is lightweight (a third the weight of steel or copper).
- That Coke can: According to the Aluminum Association, an aluminum can takes 60 days to return as a new can after recycling.
- Aluminum and its alloys are significantly used in the aerospace industry auto manufacturing and transportation, construction, packaging etc.
- Aluminum is also used as a compound to manufacturing paints, antacids, deodorants and are also used as a catalyst in explosives (such as ammonium nitrate) to boost explosive capabilities.
- Aluminum is a very reflective metal, which is very useful in home decor items such as aluminum blinds, aluminum fence, aluminum doors, aluminum windows etc.
- Keep vinegar and bleach away from your aluminum products.
- Aluminum parts when damp creates a white oxide that protects the aluminum surface but keeps paint from sticking.
- Aluminum is incredibly flexible enough that it can be easily formed into the tiniest of items such as paper clips, dial gauges etc.
I hope you enjoyed these fun facts about aluminum. More than 90% of our die casting production is in aluminum alloy parts.
Permalink: https://www.kineticdiecasting.com/kdc/aluminum-aka-aluminium-fun-facts/
- Sources:
- http://www.kineticdiecasting.com/
- http://www.livescience.com/28865-aluminum.html
- http://www.softschools.com/facts/periodic_table/aluminium_facts/188/
What Die Casting Parts We Make
Kinetic Die Casting Part Types :
Die Casting Military Parts.
Die Cast Heater Plates.
Aluminum Heat Sinks Die Castings.
Golfing Products.
Cast Aluminum Golf Products.
Aluminum Handle Hardware.
Aluminum Chassis Castings.
Cast Aluminum Parts for Music.
Aluminum Hardware Brackets.
Aluminum Automotive Parts.
Cast Aluminum Lighting Parts.
Aluminum Lighting Fixture Parts.
Aluminum Speaker Parts.
Roofing Tilemolds.
Cast Aluminum Rooftile Molds.
Aerospace Die Castings.
Cast Aluminum Boxes.
Aluminum Aircraft Parts.
Die Casting Company.
Images Pictures Die Cast Parts.
Answers for Diecastings.
Kinetic Die Casting Company Blog.
Die Casting Tools Molds .
Kinetic Die Casting Company.
Posted in Aircraft Parts, Aluminum Die Casting, Aluminum Heatsinks, Auto Parts, Blogger, Bracket, Brass Die Casting, Business, Chocolate Fountain, Die Casting Alloys, Die Casting Company, Die Casting Parts, Diecasting Process, Enclosures, Golf, Handle, Kinetic Die Casting Company, Lighting, Plastic Parts, Tooling Die Casting
Tagged #diecasting, #kineticdc, Aircraft Parts, Airplane Parts, Aluminum Auto Parts, Aluminum Enclosures, aluminum lighting fixture, auto parts, Business, chocolate fountain, golf product, Hardware, Military Parts, Tooling Die Casting, Zinc Die Casting
2 Comments
Take the Heat Off and Use Aluminum Heatsinks
Take the Heat off and Use Aluminum Heatsinks. Aluminum heatsinks are among die casting products with wide applications in consumer goods. In fact, as you are reading this in your PC, an aluminum heatsink part is most likely working for you. An aluminum heat sink is the component built sitting on top of the circuit board of a computer’s CPU to prevent overheating and damage to the circuits.
What does aluminum heat sinks do? What aluminum heat sinks do is take the heat off from the computer’s board because the material that this die casting aluminum is made has good thermal conductivity. Aluminum use as die casting material is also advantageous because it is very light, making aluminum heatsinks a necessary component for both desktop and laptop computers.
Also, Aluminum heat sinks are useful in thermal management of refrigeration systems. Heat is removed from the enclosed refrigerator space and shifted somewhere else for a more efficient operation. For several years, original equipment manufacturers (OEMs) in North America have sourcing such components as aluminum heatsinks from overseas die casting companies because of cost considerations.
Unfortunately, things have changed lately as the OEMs have realized that the sourcing die casting components, such aluminum heatsinks, from overseas suppliers is not cost-effective after all. There are quality issues in die casting products manufactured overseas. In addition, there are logistical problems with overseas suppliers, making US die casting companies more attractive as local production partners. A more serious concern is confidentiality. For instance, a computer manufacturer may have to reveal product specifications, technological know-how and marketing information to its foreign supplier of aluminum heatsinks, a leak that could be tapped by competitors either at home or abroad.
Die Casting Aluminum Heat Sink Parts
Kinetic Die Casting Company makes aluminum die castings as Die Casting Aluminum Heat Sinks. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
