Category Archives: Lighting

The advantages of Aluminum Lighting Fixture Parts over plastic

Posted on 07/22/2010 by admin

The advantages of Aluminum Lighting Fixture Parts over plastic. The advantages of Aluminum Lighting Fixture Parts over plastic are numerous. First of all Aluminum Lighting Fixtures Parts have been around for decades. And they are also less expensive than other manufacturing processes. They also have good thermal properties. This means that they can be used in applications where high temperature power supplies and bulbs are present. Does plastic have any of these properties?

All in all, Aluminum Lighting Fixture Parts have better quality than plastic. There is even a wide variety to choose from already. If all aluminum products were welded together before, now they are built and sold in parts. It was because if they were always welded together, the labor was costly, and the shapes and sizes were limited. Now, they can be used in several lighting applications. But let’s not forget the best advantage aluminum has over plastic, aluminum fixtures are electrically conductive, plus they can be grounded.

You should always be conscious of the quality of your Aluminum Lighting Parts. One shouldn’t settle for anything less because these parts help in the everyday lives of people, providing light in houses, buildings, tunnels, basically everywhere. They are a necessity. So why waste money and time on plastic parts? They are not safe, and neither do they last long.

Contact Kinetic Die Casting Company to get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting is located in Southern California. KDC specializes in aluminum and zinc die casting tooling. If you would like a quote, please visit our website:Kinetic Die Casting Company

Posted in Lighting | Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum lighting fixture, die casting, Die Casting Company, Die Casting Parts, Diecasting Process, Lighting Parts | Leave a comment

Examples of Aluminum Lighting Parts

Posted on 07/18/2010 by admin

Examples of Aluminum Lighting Parts. Aluminum Lighting Parts have been manufactured for many decades already. After all, aluminum has proven its worth. This is because Aluminum Lighting fixtures do not cost as much as other manufacturing processes. Examples of Aluminum lighting parts have very good thermal properties. They have been used in applications where there are high temperature power supplies. They can also withstand humidity in the environment.

Lighting housings were actually welded together not long ago. But this proved to be too tedious. It took time and it costs more. It also limits the availability of the shapes preferred by clients. But now, they can be made in many shapes and sizes for the varying lighting applications, hence the aluminum lighting parts.

Aluminum lighting parts weigh less than other kinds of steel. This means that aluminum would actually cost less. They are also electrically conductive and they also looked better than other metals when powder coated. And plastic parts are not as strong as aluminum.

They are used in constructing houses, tunnels, and all other places that need artificial lighting for obvious reasons. Especially places like business establishments, traffic lights, outdoor coach lights, and endcaps on light fixtures. There is even a wide variety to choose from.

Kinetic Die Casting makes great quality aluminum, and Zinc Die Casting If looking for a job or would like a quote please visit our website:Kinetic Die Casting Company

Posted in Lighting | Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum lighting fixture, aluminum parts, die casting, Die Casting Company, Die Castings, Diecasting Process | Leave a comment

Methods for Making Aluminum Lighting Fixture Parts

Posted on 07/04/2010 by admin

Methods for Making Aluminum Lighting Fixture Parts. Are you interested in finding out information about the methods for making aluminum lighting fixture parts? These fixtures are essential to homes as well as different kinds of establishments and structures. Without these, life will literally become dark, not unless of course, there is a natural source of light, which cannot happen all the time.

When you talk about the methods for making aluminum lighting fixture parts, the first thing that comes to mind is through die casting. This process is known be a less expensive method of turning metal into the materials that are needed by manufacturers in able to produce the complete product. At this scenario, the more popular metal that is utilized is the aluminum. Other companies resort to different kinds of metal alloys like copper and zinc. Aluminum is preferred by many, even by those who are into the field of building houses.

Die casting is not only cheap, it can also be trusted to produce fast results. The first thing that is done with this method is to liquefy the aluminum by heating it. When the metal turns into liquid, this is placed into molds, which are called castings. After it has solidified and turned into the shape of the mold, you have the end product which is the aluminum lighting fixture.

Kinetic Die Casting manufactures a lot of aluminum rooftile plates , trim tile molds, and military die casting. If you would like a quote, please visit our website: Kinetic Die Casting Company

Posted in Lighting | Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum lighting fixture, aluminum parts, die casting, Die Casting Company, Diecasting Process, Lighting Parts | Leave a comment

How Are Aluminum Lighting Parts Made?

Posted on 06/24/2010 by admin

How Are Aluminum Lighting Parts Made? You may have only wondered recently about how are aluminum lighting parts made, but these kinds of fixtures and parts have been in production a long time ago. Why do you think these parts were able to surpass changes in this kind of industry? The process in creating these parts is actually less expensive than the other kinds of processes. If this is the case, you can just imagine how the end products are much cheaper than the other types, which are made from other materials.

Besides, aluminum light fixtures are said to have better thermal properties. These fixtures are utilized in certain applications wherein high temperature power supplies and bulbs are being used. When this process was still unpopular, the lighting in houses was welded together. You can only imagine the high cost because people have to pay for labor expenses. Aside from the cost, the old method in doing this has only limited shapes that were available.

The aluminum lighting fixture parts come in may sizes and shapes. These parts can be utilized in various applications and were manufactured with net shape. If you will have the parts shipped to you, you will spend less than when you have something made of steel delivered. The aluminum parts are lighter than the kinds that are made of steel.

Kinetic Die Casting manufactures zinc and aluminium die casting. If you would like a quote, please visit our website:Die Casting quote

Pressure Die Casting Aluminum Lighting Fixture Parts VS Sand Casting

Posted on 06/02/2010 by admin

Pressure Die Casting Aluminum Lighting Fixture Parts VS Sand Casting. Most people might be familiar with sand casting, which is the process of putting a sand mixture with an amount of liquid metal to produce materials. Now, would it be ideal for a consumer to go for lighting fixture parts made by sand casting or still resort to pressure die casting?

When it comes to durability, a consumer can never go wrong with lighting fixture parts that are made through the process of pressure die casting. The main material used in this process is aluminum, which is one of the most desired products in the market than steel or plastic, since it is very versatile (it can be easily molded into many forms) and it never rusts when exposed to oxygen. Lighting fixture parts that are made from this material and process offer a longer life and better protection from external factors for the lighting.

If economy is the main propriety, lighting fixtures done by sand casting is more expensive, since there are two materials present – sand and metal. There are more processes involved in just sand casting alone, so the makers might ask for a higher price.

Now, the issues of pressure die casting aluminum lighting fixture parts VS sand casting should be over.

Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting is located in North Hollywood,California. KDC specializes in manufacturing zinc and aluminum alloy casting parts. If you would like a quote, please visit our website:Kinetic Die Casting Company

Posted in Lighting | Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum lighting fixture, Die Casting Company, Die Casting Parts, Lighting Parts | Leave a comment

Posted on 12/10/2009 by admin

>> The Advantages of Aluminum Hardware Brackets over Plastic

Advantages of Aluminum Hardware Brackets over Plastic: Plastic is an insulator, while aluminum is electrically conductive. Plastic will need a special coating to achieve a similar result with aluminum (albeit inferior). Plastic does not ground, thus it requires extra grounding …
Continue reading »