Over 30 Die Casters Go to Washington DC. More than 100 U.S. metalcasters, including 30 die casting representatives, visited Washington, DC, to attend the 2009 Metalcasting Industry Government Affairs Conference, which was May 4-5 at the Capitol Hilton, Washington, DC. …
Continue reading
Category Archives: Lighting
Lighting Endcaps in 2021
In September 2008, we looked a Lighting Endcaps for the entertainment industry. Lighting endcaps are typically used to enclose the end of a light fixture. In this case our customer needed sets of a left endcap and a right endcap. This project required only 500 sets of parts each year. The engineer was unsure if Aluminum Die Casting was the answer to her dilemma. Many people were telling her that the minimum run for die castings was 1000’s not 100’s each year.
We looked at her project and told her, it fit in our niche of:
She placed the order with us in October 2008 for two cavity mold, die casting tooling, and for 200 sets of parts. She was in a hurry so she then asked if we would provide a few sets of parts she needed for an up-coming design show using SLA. Instead we gave her sample units in less than the 12 weeks we promised. She used our samples at the show. This saved her $2,000 in custom metal parts prototype part costs.
Kinetic Die Casting does this all the time for new customers. We accept orders and deliver the aluminum parts early. We specialize in delivering faster and better quality than many customers are getting from our competitors from here locally or from far away lands.
Kinetic Die Casting manufactures a lot of aluminum rooftile plates , trim tile molds, and military die casting. If you would like a quote, please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Quality Standards
Die Casting Porosity
Die Casting Draft Angle
Die Cast Parts Company
Brass Die Casting Lighting Fixtures are a Good Choice 2020
Why Brass Die Casting Lighting Fixtures are a Good Choice. There are two very common techniques used in making lighting fixtures out of brass – sheet lighting fixtures and brass die casting lighting fixtures. In the case of sheet brass fixtures, they are created by taking sheets of solid brass then bending the brass sheets into the desired shapes. This can be accomplished by making use of a high-pressure machine press. The machine press will stamp the brass sheets into their molded shapes. In comparison to die cast brass, sheet brass is much thinner. It is however more economical.
Brass die casting lighting fixtures on the other hand, make use of molds. Liquid brass will be poured into these molds to form the lighting fixtures. Most manufacturers and suppliers prefer die cast molds because of their quality and durability. For parts and fixtures that require consistent fits, efficient finishes and tight tolerances, brass die casting is well preferred. A method called sand casting is often used as an alternative to die casting. In this method a temporary mold made from packed sand is used. Brass is poured into the sand mold and when the brass hardens, the sand mold is broken away. This however does not come close to the efficiency and preciseness of die cast molds.
Brass die casting lighting fixtures speak of nothing but quality, durability and longevity. Even under rugged, humid or corrosive outdoor environments, brass lighting fixtures will last a lifetime. Furthermore, when it comes to aesthetic beauty, nothing can compare to the classic and stylish appearance of brass.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures custom metal parts to their customer. If you would like more information about Kinetic Die Casting, please visit our website:Kinetic Die Casting Company
Lighting Die Casting Parts
Die Casting Lighting Parts
Diecasting Parts
Die Casting Lighting Part Pictures
Die Casting Lighting Fixtures
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Lighting Parts Prices
Posted in Blogger, Brass Die Casting, Lighting, newsletter
Tagged #diecasting, #kineticdc, die casting, Lighting Parts
2 Comments
Die Casting Fixtures 2020
Die Casting Lighting Fixtures
The main purpose of lighting fixtures or parts is to create artificial light. A lighting fixture consist of 0 parts—the light source, light reflector that directs the light to a certain point, an opening (with lens or without lenses), the light housing for protection, an electrical counterweight, and a cord connecting to the power source. Lighting fixtures can be classified as indoor lighting fixtures and outdoor lighting fixtures.
Before the introduction to an aluminum die casting company, lighting parts are made by welding pieces together. This process is costly, time consuming, and labor extensive. Nowadays, lighting parts are manufactured by die casting, a process wherein molten metal is forced into mold cavities. Die casting is beneficial if you are producing large quantities of small to medium sized lighting parts with good details,
Aluminum is lightweight and sturdy, a material often used to make lighting parts because of its durability and good thermal and electrical properties. Die cast aluminum lighting parts are made faster because they can be produced in net shape, meaning there are no welding or drilling methods needed after. Holes can be added to the mold cavities. These holes are necessary for the installation of covers or lids.
Die cast aluminum lighting parts are used in medical offices and parking garages for lighting fixtures. They are also used for bullet lighting fixtures, street traffic lights, outdoor and wall lighting fixtures. Furthermore, there are special light parts made for Aluminum lighting fixtures used for automobile lighting, marine lighting, medical lighting, and aerospace lighting.
The Purpose of Aluminum Die Cast Lighting Fixtures 2020
The main purpose of lighting fixtures or parts is to create artificial light. A lighting fixture consist of 0 parts—the light source, light reflector that directs the light to a certain point, an opening (with lens or without lenses), the light housing for protection, an electrical counterweight, and a cord connecting to the power source. Lighting fixtures can be classified as indoor lighting fixtures and outdoor lighting fixtures.
Before the introduction to an aluminum die casting company, lighting parts are made by welding pieces together. This process is costly, time consuming, and labor extensive. Nowadays, lighting parts are manufactured by die casting, a process wherein molten metal is forced into mold cavities. Die casting is beneficial if you are producing large quantities of small to medium sized lighting parts with good details,
Aluminum is lightweight and sturdy, a material often used to make lighting parts because of its durability and good thermal and electrical properties. Die cast aluminum lighting parts are made faster because they can be produced in net shape, meaning there are no welding or drilling methods needed after. Holes can be added to the mold cavities. These holes are necessary for the installation of covers or lids.
Die cast aluminum lighting parts are used in medical offices and parking garages for lighting fixtures. They are also used for bullet lighting fixtures, street traffic lights, outdoor and wall lighting fixtures. Furthermore, there are special light parts made for Aluminum lighting fixtures used for automobile lighting, marine lighting, medical lighting, and aerospace lighting.
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Quality Standards
Die Casting Porosity
Die Casting Draft Angle
Die Cast Parts Company
Aluminum Lighting Fixtures and Parts 2019
Aluminum Lighting Fixtures and Parts have been produced for many years. Aluminum Die Casting Lighting fixtures are less expensive than other manufacturing processes. Aluminum light fixtures have good thermal properties and are used in applications where high temperature power supplies and bulbs are used. In former years, lighting housings were welded together, which was labor intensive, costly, and had limitations on the shapes available. Aluminum Lighting Fixture Parts can be many shapes and sizes, used in many lighting applications, and can be manufactured net shape. Aluminum weighs 1/3 of a comparable steel part. The aluminum part would cost less to ship due to the weight. Aluminum lighting fixtures can be produced in quantities of a few hundred to thousands of aluminum lighting fixtures each day. Aluminum fixtures are electrically conductive and can be grounded.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Aluminum Lighting Fixtures and Parts 2019
Lighting Die Casting Parts
Die Casting Lighting Parts
Diecasting Parts
Die Casting Lighting Part Pictures
Die Casting Lighting Fixtures
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Lighting Parts Prices
