I had lunch today with the owner of a die casting company who expressed an interest in selling his die casting company. He does not want to sell his company but he may need to sell it if his sales …
Continue reading
Category Archives: newsletter
Short Run Die Casting Parts Production
High pressure die casting is a process we use to make die cast parts. We inject molten aluminum alloy or zinc alloy metals under pressure into a steel die to produce aluminum parts. Die casting is a very inexpensive aluminum part manufacturing process. We have made millions of these die casting parts for our customers that are manufacturing companies since 1994.
We typically ship thousands of parts to each customer a week. Kinetic Die Casting Company is one of a few die casting companies that are willing to produce “Short Run Die Castings“. We accept small quantity purchase orders, meaning that we will produce less than one thousand (1,000) parts in a production run. Some of our customers place a blanket order for 1,000 parts with deliveries of 100 every month. Some of our customers will send us a purchase order for 100 or 200 parts. We are happy to help all of our customers with their needs.
Short Run Die Casting Parts Production
Permalink: https://www.kineticdiecasting.com/kdc/short-run-die-casting-parts-production/
Contact us if we can help your company:
Click for die casting part prices
Kinetic Die Casting Company
6918 Beck Avenue, North Hollywood, CA 91605
818-982-9200 or email us sales@kineticdc.com
Happy Thanksgiving from Kineticdc 2016
Kinetic Die Casting Company wishes all our friends and customers a Happy Thanksgiving in 2016. We are taking a long lunch today A company. Please call again after 1:00 PM if we do not answer. We will be closed November 24th and 25th, 2016 to be with or families in observance of Thanksgiving. Please enjoy the time with your family during the start of the holiday season.
Enjoy Your Thanksgiving Dinner
Kinetic Die Casting Company – E-mail sales@kineticdc.com
818-982-9200 – 800-524-8083 – Toll Free – 818-982-0877 Fax
6918 Beck Avenue North Hollywood, California USA 91605
Permalink: https://www.kineticdiecasting.com/kdc/happy-thanksgiving-from-kineticdc-2016
Kinetic Die Casting Company makes aluminum parts and zinc parts, on time, for most manufacturing industries.
The parts we make today, we ship today.
EXPORTECH™ LOS ANGELES 2016
EXPORTECH™ LOS ANGELES for Aerospace & Defense Manufacturers.
The only national program that helps individual companies develop an export plan. Helping manufacturers achieve their export objectives and increase sales in global markets
Session 1: November 17, 2016 – Export Strategy & Best Practices – Exploring Strategic Options
Session 2: December 15, 2016 – Mechanics of Exporting – Removing Knowledge Gaps – Overcoming Obstacles
Session 3: January 26, 2017 – Export Growth Plan Presentations – Obtaining Expert Feedback – Individual Coaching – Plan Implementation and Go-to-Market
All sessions start at 7:30 a.m. and conclude at 5:00 p.m.
Continental breakfast: 7:30 – 8:00 a.m.
All sessions will be held at:
The Entrepreneur Center
13420 Van Nuys Blvd.
Pacoima, CA 91331
To register or for any questions please call Elizabeth Glynn at 310-984-0728 or eglynn@cmtc.com For additional information on exporting visit: www.cmtc.com/exporting
Department of Defense, Office of Economic Assistance is funding the majority of the program $5,000 value per company Your cost: ONLY $500 per company for all three sessions
NOTE: Must have been impacted by defense budget reductions. Check with CMTC for details.
Permalink: https://www.kineticdiecasting.com/kdc/exportech-los-angeles-2016/
Aluminum (aka Aluminium) Fun Facts
Aluminum (Al) is the most abundant mineral on Earth after oxygen and silicon and is the most abundant metal found naturally on Earth. It is present in 270 minerals. Aluminum is a silver, soft metal with an atomic number of thirteen and thirteen protons in the nucleus. It constitutes about eight percent of the Earth’s land mass.
Aluminum (aka Aluminium) fun facts:
- Caution – Iodine and Aluminum powder plus a few drops of water create: Clouds of toxic purple iodine vapor and a flame.
- Recycling aluminum takes only 5 percent of the energy needed to extract new aluminum from ore.
- Aluminum is globally the most used metal that does not contain iron.
- Aluminum is almost always used as an alloy, even if the aluminum content is as high as 99%.
- The most commonly used elements to combine with aluminum to create an alloy are zinc, copper, silicon, magnesium, and manganese.
- This element is the second-most abundant metallic element in Earth’s crust after silicon.
- Aluminum is lightweight (a third the weight of steel or copper).
- That Coke can: According to the Aluminum Association, an aluminum can takes 60 days to return as a new can after recycling.
- Aluminum and its alloys are significantly used in the aerospace industry auto manufacturing and transportation, construction, packaging etc.
- Aluminum is also used as a compound to manufacturing paints, antacids, deodorants and are also used as a catalyst in explosives (such as ammonium nitrate) to boost explosive capabilities.
- Aluminum is a very reflective metal, which is very useful in home decor items such as aluminum blinds, aluminum fence, aluminum doors, aluminum windows etc.
- Keep vinegar and bleach away from your aluminum products.
- Aluminum parts when damp creates a white oxide that protects the aluminum surface but keeps paint from sticking.
- Aluminum is incredibly flexible enough that it can be easily formed into the tiniest of items such as paper clips, dial gauges etc.
I hope you enjoyed these fun facts about aluminum. More than 90% of our die casting production is in aluminum alloy parts.
Permalink: https://www.kineticdiecasting.com/kdc/aluminum-aka-aluminium-fun-facts/
- Sources:
- http://www.kineticdiecasting.com/
- http://www.livescience.com/28865-aluminum.html
- http://www.softschools.com/facts/periodic_table/aluminium_facts/188/
Monday is Halloween 2016
Today is October 31st Halloween 2016.
Be Careful of children today. It is getting dark earlier. Be careful driving home from work.