Die Casting Tooling: 4 Types of Dies. Dies, or more appropriately termed as die cast tooling, are one of the most essential parts when it comes to die casting. Naturally, you cannot make a certain alloy component without creating the …
Continue reading
Category Archives: Plastic Parts
Plastic Parts For Military
There many advantages of aluminum military parts over plastic parts. Being in the military force is a life-threatening job. Together with this risk is the honor of saving one’s territory, which is one of the reasons why a number of men choose this as their career path. However, their success does not depend on their skills alone. The equipment to be used should also be considered. Look at these Night Vision Goggles made by Kinetic Die Casting Company. We made over 200,000 sets of these aluminum military parts for our customer.
To help the military in fulfilling their goal, they should know the advantages of aluminum military parts over plastic military parts. Why? Plastic military parts may be cheaper, but it cannot match the advantages given by aluminum military parts. Aluminum military parts can withstand prolong stocking periods. When not in battle, the equipment tend to be stored in the barracks. Unfortunately, some of these fade quickly in terms of quality and usability. It is because some parts are made of a special plastic which is not capable of keeping its condition over time. Aluminum does this, even if exposed to strong chemicals. Moreover, plastic parts are highly vulnerable to damage due to strong impacts. For instance, a rifle had to be dropped. The damage it can give to an aluminum part would not be that severe, but it would be very different for a plastic military part.
These are only a few of the many advantages of aluminum die casting military parts over the plastic parts.
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
What Are Die Casting Parts?
Die Casting Aluminum Heat Sinks
Aluminum Boxes Diecastings
Aluminum Parts or Plastic Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Airplane Parts in Plastic or Aluminum
The Advantages of Aluminum Aircraft Parts over Plastic. On comparing aluminum die cast parts with plastic parts in terms of ability to recycle:
Plastic: Dilemmas concerning the plastic product’s ability to recycle came up by a nationwide task force, which called for plastics dealers abstain from using the worldwide symbol for recycling in ads, because it was considered as ambiguous in relation to plastics.
Aluminum: Almost all metals have constantly been readily recyclable. Die castings are never dangerous wastes and they never cause problems in management or reprocessing.
-
Plastic Parts:
- Plastic is more fragile than aluminum parts.
- Plastic is too bendable for a lot of purposes.
- Plastic is not dimensionally firm enough.
- Plastic does not normally perform well in warm conditions.
- Plastic does not act well with a lot of coatings.
- Plastic injection moldings do not obstruct radio frequency.
- Plastic does not obstruct electromagnetic discharge.
- Plastic injection moulded parts do not provide themselves simply for chrome plating.
Die Cast Aluminum Parts: - Die Cast Parts have higher level durability under weight than plastics.
- Die Cast Parts are totally defiant to ultra-violet rays.
- Die Cast Parts are totally defiant to riding out.
- Die Cast Parts are totally defiant to breaking in the incidence of diverse reagents.
- Manufacturing phases for creating die cast parts are much quicker than for injection molded parts.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote. Kinetic Die Casting manufactures die casting metal parts creating products like roofing tile molds, lighting parts, and military parts. If you would like more information about Kinetic Die Casting, visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
What is Die Casting?
Costs Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Permalink: https://www.kineticdiecasting.com/kdc/airplane-parts-in-plastic-or-aluminum
Plastic or Aluminum Footprint
Low Carbon Footprint of Aluminum Die Castings Should Be Marketed to Industry. The die casting industry has long been built on recycling. The metal alloys used by the die casters are produced from recycled raw materials, created with far less energy than is required for virgin alloys. More than 95% of the aluminum die castings produced in North America are made of post-consumer recycled aluminum, helping to keep the aluminum content of municipal solid waste to less than 1%.
In response to questions from NADCA member companies about the carbon footprint of automotive die castings compared to alternative materials and processes for automotive components, this Carbon Footprint study by William A. Butler was authorized. Specifically, the study compares the cradle-to-grave carbon footprint of aluminum and magnesium die cast components with the carbon footprint of injection molded plastic components. The results of the study provide environmental impact information to the die casting industry, provide a baseline for further component carbon footprint evaluations in the future and identify opportunities for industry improvement in the environmental impact of die casting operations. One of the most significant study results is that — neglecting the contribution of product use to the total carbon footprint — aluminum die casting has the lowest carbon footprint because of its use of secondary aluminum alloys and its ability to be recycled.
NADCA members can download The “Carbon Footprint” of Aluminum and Magnesium Die Castings Compared to Injection Molded Components at www.diecasting.org/members.
Permalink: https://www.kineticdiecasting.com/kdc/plastic-or-aluminum-footprint/
Kinetic Die Casting utilizes die casting to manufacture parts like aluminum car parts, airplane parts, lighting parts and much, much more. If you would like to request a quote, please visit our website:Die Casting quote
Aluminum Handle Hardware
New Aluminum Handel Hardware. Aluminum Handles are found everywhere. At home, at the office you might not notice but you find and use it for your everyday needs. As for example, it is used for handles, common furniture, accessories and design for the house like flower pots and curtains. Aluminum handle hardware brackets are top of the line, because it produced in a way that it would last a lifetime. Through die casting, New Aluminum Hardware Brackets parts are produced as a whole, which means it is not many pieces assembled or welded together. For this reason, the brackets are harder to break or destroy. Aside from this die casting also die cast the holes in to place, thus saving time and money for manufacturer in using machining holes.
New Aluminum Hardware Brackets are recommended than steel brackets because it is very light in weight. It is very good in making you keep things in their correct position. To be exact, it is 1/3 less in weight in comparison to its competition- steel brackets. It is also electrical and heat conductive. These type of handle castings can be sturdier than steel, and are easily massed produced every day. Several methods could be done to create new aluminum hardware brackets. Examples are pressure die casting or extrusion.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Permalink: https://www.kineticdiecasting.com/kdc/aluminum-handle-hardware/
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Box Enclosures
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Kinetic Die Casting is a aluminum and zinc die casting company. If you would like to know more information, please visit our website:Kinetic Die Casting Company