Category Archives: Tooling Die Casting

Kinetic Lighting Parts

The aluminum die casting manufacturing process is quite similar to permanent mold casting. Both processes start out by melting or liquefying the aluminum, that is going to be used. The melted materials will then be injected into die cast molds castings. The liquid will then take the form of the patterns in the mold castings. The molds will then be allowed to cool down to harden and once they are opened, the product is finished. The difference between die casting and permanent mold casting is that the former uses high amounts of pressure in the molds so that the material will get into every part of the cavity. This results in better quality of the products which is why die casting is chosen to make Aluminum Lighting Fixtures.

Also, Aluminum Lighting Fixtures help in illuminating man made structures such as houses, buildings, tunnels as well as the streets at night. They are an essential part of these structures and a lot of them are needed. By using the die casting process, the bulk orders for these Aluminum Lighting Fixtures are met. Not only that, quality and consistency is insured by die casting. This is a cost efficient and effective way of producing Aluminum Lighting Fixtures.

Furthermore, Aluminum is a great choice for lighting fixtures as they are strong and can last a very long time. They are also very lightweight compared to other metals. Since they can be harvested almost anywhere, they are very cheap too.

Die Casting Light Fixture Parts
Light Fixture Die Casting Parts

Kinetic Die Casting Company makes aluminum die castings as Lighting Fixture Die Castings. We make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.

Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com

Posted in Aluminum Die Casting, Blogger, Lighting, newsletter, Tooling Die Casting | Tagged , , , , , | 1 Comment

Tooling Used in Die Casting

Die Casting Tooling. Aluminum die casting is a manufacturing process used to fulfill orders for large quantities of small to medium sized metal parts. This dependable process is used for high volume products made by the metalworking industry.
Die Casting Tooling
Die Casting Tooling

This process called die casting starts off with molten metal. The molten metal is then forced into the Die Casting Molds in a high pressure environment. After which, they are then machined into dies. This process results in the metal parts to be consistent in their dimensions, with high quality and good detail. For most of the time, die casting makes use of non ferrous metals such as tin, aluminum, zinc and copper among others but ferrous metals can also be used in this process. However, harder and stronger metals such as steel and iron cannot be used in this process; instead they are used to make Die Casting Molds.

These die casting molds come in a number of different shapes and sizes. Some can be made as single cavity molds which can make one part for every cycle or multiple cavity molds which can make several parts in a single cycle. Their shape and design would determine the cost of these molds; the more complex the design then the higher the cost of the mold would be. They can be very expensive, ranging from hundreds of dollars to thousands of dollars per mold.

Permalink: https://www.kineticdiecasting.com/kdc/tooling-used-in-die-casting/

The Parts We Make Today, We Ship Today”


Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Box Enclosures
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877

Posted in Blogger, Diecasting Process, newsletter, Tooling Die Casting | Tagged , , , | 2 Comments

Die Casting Metal Flow 2017

#Kineticdc #diecasting Logo
Kinetic Die Casting Company (www.kineticdc.com) uses software to check Heat Sink Metal Flow into Mold or Die Casting Tooling. Aluminum Heat Sink for the lighting industry. Two cavity aluminum heat sink die casting molds. 818-982-9200 (music provided by YouTube)

Permalink: https://www.kineticdiecasting.com/kdc/metal-flow-video-2017/

Kinetic Die Casting Company
E-mail sales@kineticdc.com / 818-982-9200 / 800-524-8083 Toll Free / 818-982-0877 Fax
6918 Beck Avenue, North Hollywood, California USA 91605,
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling

Posted in Aluminum Heatsinks, Blogger, Diecasting Process, Kinetic Die Casting Company, newsletter, Supplier, Tooling Die Casting | Tagged , , , , | Leave a comment

Diecastings Made 2017

kineticdc logo

Kinetic Die Casting Part Types in 2017:
Die Casting Military Parts.
Die Cast Heater Plates.
Aluminum Heat Sinks Die Castings.
Golfing Products.
Cast Aluminum Golf Products.
Aluminum Handle Hardware.
Aluminum Chassis Castings.
Cast Aluminum Parts for Music.
Aluminum Hardware Brackets.
Aluminum Automotive Parts.
Cast Aluminum Lighting Parts.
Aluminum Lighting Fixture Parts.
Aluminum Speaker Parts.
Roofing Tilemolds.
Cast Aluminum Rooftile Molds.
Aerospace Die Castings.
Cast Aluminum Boxes.
Aluminum Aircraft Parts.
Die Casting Company.
Images Pictures Die Cast Parts.
Answers for Diecastings.
Kinetic Die Casting Company Blog.
Die Casting Tools Molds .
Kinetic Die Casting Company.

Permalink: https://www.kineticdiecasting.com/kdc/diecastings-made-2017/

Posted in Aircraft Parts, Aluminum Die Casting, Aluminum Heatsinks, Auto Parts, Blogger, Bracket, Brass Die Casting, Chocolate Fountain, Die Casting Parts, Enclosures, Golf, Handle, Lighting, newsletter, Plastic Parts, Tooling Die Casting | Tagged , , , , , , , , , , , , | 1 Comment

November 2017 Tool Transfer Special

Kinetic Die Casting Company will make die casting parts for our customers that send us their die casting tools from other die casting companies.

We are still offering a Tooling Transfer special.
Manufacturing companies transfer their die casting tooling and we make their parts in just a few weeks.
diecasting_tool_and_trim_die

Kinetic Die Casting Company, a better die casting part supplier.

Kinetic Die Casting Company makes that decision easier.
1. Send us your die casting tooling and die casting molds
2. A purchase order made to us with your old suppliers prices.
3. We will honor the die casting part price paid to the old die casting part supplier.
4. You will get better die casting parts than you received before.
5. We will ship the die casting parts to you in less than 4 weeks.

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 91605 USA
Office Hours: Monday through Thursday 6:00 AM to 4:30 PM (Pacific Time)
818-982-9200 – sales@kineticdc.comwww.kineticdiecasting.com

Permalink: https://www.kineticdiecasting.com/kdc/die-casting-tool-transfer/

The Parts We Make Today, We Ship Today”


Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling

Posted in Aircraft Parts, Auto Parts, Blogger, Customers, Lighting, newsletter, Tooling Die Casting | Tagged , , , , | Leave a comment