Kinetic Die Casting produces aluminum die casting parts used as Aluminum Golfing Parts. There are many Aluminum Golfing Parts sold everyday in golf shops and sporting goods stores. The heads on some golf clubs are die cast in aluminum. Golf …
Continue reading
Zinc Die Casting and Its Use on Tools
Zinc Die Casting and Its Use on Tools. Hardware parts are chiefly made of metal. It is the most common material used for the production of tools because of its strength and robustness. Repairs, after all, need fortitude not only from the wielder of the tool but from the tool itself. A flexible screwdriver, after all, is not good in execution of its function if it is made of inferior material.
One process of manufacturing tools and other metal parts is zinc die casting. Hardware parts such as wrenches, electrical connectors, gearbox and turbine housings, and locks can be made out of zinc. This metal is a decent foundation of raw material because it shows characteristics that are primary in the mind of an astute customer: strength, ductility, and durability.
The strength, ductility, and durability alone are enough to persuade any person to change to materials made from zinc die casting. Zinc hardware parts made from zinc are assured to be durable, able to endure strong impacts from hammering, screwing, and bolting.
Apart from tools, zinc is also used in the construction of wires, parts of appliances and laptops, lights, aircrafts, and other objects. It can be used in various products because of its flexibility and endurance.
Construction and repair are two activities that need dependence on human forte as well as tools. It is but appropriate that the tools used in these activities match the stress and pressure essential by the jobs. Objects made of zinc may just be the best match for people who are looking for such.
Kinetic Die Casting Company, Inc.
6918 Beck Avenue, North Hollywood, CA 91605
818-982-9200
Sales@kineticdc.com
Sponsored Listings:
Posted in Blogger, Die Casting Alloys, Die Casting Parts, newsletter
Tagged Zinc Die Casting
Leave a comment
The Environment and Aluminum Die Casting in 2023
The Environment and Aluminum Die Castings. In our Earth’s crust, aluminum is the most abundant (8.3% by weight) metallic element and the third most abundant of all elements (after oxygen and silicon).
Kinetic Die Casting Company produces parts using aluminum. Aluminum is theoretically 100% recyclable without any loss of its natural qualities. The global per capita stock of aluminum in use in society (i.e. in cars, buildings, electronics etc.) is 80 kg. Much of this is in more-developed countries (350–500 kg per capita) rather than less-developed countries (35 kg per capita). Knowing the per capita stocks and their approximate lifespan is important for planned recycling.
Other manufacturing materials, such as steel and plastic, can not be recycled or have limited recycle ability. These materials fill our landfills and break down very slowly. Many plastic materials appear as if they will last forever in our landfills.
Recovery of aluminum via recycling has become an important facet of the aluminum industry. Recycling involves melting the scrap, a process that requires only 5% of the energy used to produce aluminum from ore, though a significant part (up to 15% of the input material) is lost as dross (ash-like oxide). The dross can undergo a further process to extract aluminum.
Recycled aluminum is known as secondary aluminum, but maintains the same physical properties as primary aluminum. Secondary aluminum is produced in a wide range of formats and is employed in 80% of aluminum alloy castings.
The aluminum die castings manufactured by Kinetic Die Casting Company are made from 100% recycled aluminum that has been alloyed into the proper aluminum alloy that our customers specify. Typically, A380, A360 or A413 aluminum alloys.
Contact Kinetic Die Casting Company today and get a price for your 100% recycled aluminum parts. Buy 100 parts or 5,000 parts.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, CA 91605
818-982-9200
Click Here:Request Price for Die Casting Parts
Kinetic Die Casting manufactures products like aluminum hardware, and aluminum boxes. If you would like more information on Kinetic Die Casting, please visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
REACH and RoHS 3 Compliant 2023
Kinetic Die Casting Company Parts use RECYCLED Materials and comply with the EU RoHS 3 standards. Die casting alloys have less than 0.1% of any of the REACH chemicals.
REACH
Registration: Chemical producers are required to register safety data for all chemicals produced.
Evaluation: Experts from member states and the European Agency evaluate safety data for higher volume chemicals and other chemicals of concern.
Authorization: Chemicals that are “substances of very high concern” (SVHC) are to be phased out and replaced with safer alternative chemicals.
Chemicals Restriction: Chemicals may be completely banned or some uses of the chemicals can be restricted
RoHS REACH Compliant
Aluminum die casting alloys: A360 A380 A383 A413
Silicon (Si) 9.0-10.0 7.5-9.5 9.5-11.5 11.0-13.0
Iron (Fe) 2.0 2.0 1.3 2.0
Copper (Cu) 0.6 3.0-4.0 2.0-3.0 1.0
Manganese (Mn) 0.35 0.50 0.50 0.35
Magnesium (Mg) 0.4-0.6 0.10 0.10 0.10
Nickle (Ni) 0.50 0.50 0.30 0.50
Zinc (Zn) 0.50 3.0 3.0 0.50
Tin (Sn) 0.15 0.35 0.15 0.15
Others 0.25 0.50 0.50 0.25
Aluminum (Al) Balance Balance Balance Balance
REACH and RoHS 3 Compliant 2023
Permalink: https://www.kineticdiecasting.com/kdc/reach-and-rohs-3-compliant-2023/
Die Casting Comparison of Zinc Parts and Aluminum Parts in 2023
Die Casting Comparison of Zinc Parts and Aluminum Parts. Kinetic Die Casting Company produces parts for our customers in two types of metals. Aluminum and Zinc alloys. Most of the parts we produce are in aluminum.
When we get a quote request that does not specify the materiel, we ask a few questions to determine which metal would be better for them.
- Does weight matter? Zinc weighs about two and half (2.44) times more than aluminum. In other words, a part that weighs five (5) pounds in aluminum will weigh over twelve (12.22) pounds in zinc.
- Do you need EMI/RF shielding? Do you need electrical conductivity? Aluminum is much more electrically conductive than zinc, making it a better shield for RF/EMI.
- Do you need thermal conductivity? Aluminum is used by many manufacturers as a heat sink.
- Do you want parts with a highly polished finished surface? Zinc polishes very well, much better than aluminum.
- Do you need your parts plated? Zinc parts can be plated much better than aluminum.
- Are you intending to use the parts in a salt environment? Aluminum decays faster than zinc in a salty environment.
See our blog:
https://www.kineticdiecasting.com/kdc/
Whether, you need die casting parts produced in aluminum or in zinc, contact Kinetic Die Casting Company to purchase your parts or die casting tooling.
Contact Kinetic Die Casting Company to buy
Links:
Kinetic Die Casting manufactures die cast parts for their customers. If you would like to know more about what is die casting or if you would like a quote, please visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
Fraud Alert for Kinetic Die Casting Customers
I received a customer phishing email today that gave me pause for concern. It was fraud, but it appeared like a realistic email with my competitor’s official Logo. The email said the following:
“Good Day,
We are currently looking to get all outstanding invoices processed and paid at the earliest convenience and would like to request an up-to-date statement of our account showing all unpaid / outstanding invoices for our reference.
Your prompt response will be highly appreciated.
Thank you,
Christian Brownsburg
Accounts Payable Supervisor
727.371.0289”
This email was sent from a Gmail account, not the official company website address account. The recipient had no name “Good Day”. The phone number listed does not correspond to their company website phone numbers.
BEWARE!
Don’t fall for this scam! You will never receive an email from our company like this one.
Our email addresses are always from @kineticdc.com
We only use one phone number in our communications 818-982-9200.
Best Regards,
Bob Thomas, President
Kinetic Die Casting Company, Inc.
6918 Beck Avenue, North Hollywood, CA 91605
818-982-9200
Sales@kineticdc.com
