Heat dissipation is the job aluminum heat sinks perform. Heatsinks are typically used in locations where heat needs to be dissipated such as in hydraulics and more typically in electronics applications. In hydraulic applications, heatsinks use air cooling or water …
Continue reading
The Difference between Die Casting or Investment Casting in 2023
The Difference between Die Casting or Investment Casting. If you are to select, what will you favor more; die casting or investment casting process? Choosing between the two is quite a quandary since they have some comparable features. To help you select, this article will help you by presenting the rewards of both techniques.
Advantages of Die Casting
1. Die casting delivers difficult shapes with a reasonably high level of accuracy linked to other mass production technique.
2. Die cast parts are being fashioned at a quicker rate than most of the processes. Also, it needs little to no secondary machining.
3. Due to its high accuracy when it comes to details, die cast parts are dimensionally stable. In totaling, it is also long-lasting.
4. The surface of die casting parts is fairly smoother than the metal cast parts shaped by other methods. Also, the surface could be fashioned with a wide variation of uniformities.
5. Die cast parts, compared to the metal castings fashioned by other methods, can be accomplished with thinner walls.
Advantages of Investment Casting
1. Investment casting brings the designer the freedom and malleability of almost myriad alloy choices, and also elasticity in inside and outside configurations.
2. Investment casting parts are industrial in a way that only trivial secondary machining is vital.
3. Investment casting procedure doesn’t have any draft requirements, making it more exact when it comes to dimensional conformance.
4. One thing that Investment casting could assert about is its benefit in aesthetics. Fine details and intricate features, texts and logos are positively attainable.
Like
Kinetic Die Casting Company on FaceBook
This is the blog on the Kinetic Die Casting Company web site. We produce and make Audio Speaker Frames. Look at this website page for more details: www.kineticdiecasting.com/speakers.html. Contact Kinetic Die Casting Company at 818-982-9200 or email us at sales@kineticdc.com. Use this webpage to request “die casting part prices” www.kineticdiecasting.com/replyform.html
@kineticdc #kineticdc
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
Aluminum Heatsinks: What They Do 2023
Aluminum Heatsink
Aluminum heat sinks expels heat from parts and components in electronic applications. Aluminum die cast heatsinks are designed in a way that needs less machining than other manufacturing processes. The cooling fins can be manufactured at the same time as the mounting holes. Heatsink parts are made with all features necessary for cooling electronic components and to mount the heat sinks on the printed circuit board (PC board). Aluminum heat sinks have a high dimensional stability. Heat sink production begins as soon as the die casting tooling is produced. Aluminum heat sinks are produced at the rate of 250 heat sink parts per day to 2,500 heat sink parts per day. Heatsinks look good as raw parts or can be anodized or powdercoated.
Pictures of Heatsink Die Casting Parts
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Automotive Die Casting Parts
Die Casting Bracket Hardware
Airplane Die Casting Parts
Zinc Die Casting Company California
Hot Chamber and Cold Chamber Die Casting in 2023
Hot Chamber And Cold Chamber Die Casting. In the method of die casting, melted metal in injected effectively into die casting molds, or “dies”, under very high pressure. Since this process of shaping metal is very adaptable, die casting is extensively utilized as a method for forming metals into special shapes like die cast speakers. While it may use a almost the same method as mold casting, die casting uses pressures of up to 10 to 210mpa to inject metal into the die. The ensuing material shows consistency of parts, dimensional accuracy, and smooth surface finishes.
There are many diverse materials utilized in die casting, such as copper, zinc, tin, magnesium, and lead. Nevertheless, aluminum is the most extensively uzilized evaluated to these other materials as the metal is more impressionable, and is excellent for manufacturing large size cold chamber die castings, to die castings collected of tiny and intricate parts.
There are two methods utilized for die casting, specifically the cold chamber which manufacture cold chamber die castings, a cold cylinder is injected with melted metal. With less time exposure given for the metal to be pushed into the mold, cold chamber method is more often utilized for metals that without difficulty meld with iron at very high heat. The cold chamber method is also utilized for metals that have high melting points.
Alternatively, in the hot chamber process, like hot chamber zinc die casting the pressure found in the die cavity connected to it becomes enduringly a part of the melted material. A plunger is driven toward an area that is non-pressurized, exposing the inlet port attached to the pressure cylinder.
Kinetic Die Casting manufactures custom metal parts to their customer. If you would like more information about Kinetic Die Casting, please visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
Natural Gas Cost Increases January 2023
Kinetic Die Casting Company’s recent SoCal Gas bill has more than tripled (300%+) in the last 12 months. On 01/23/23 our natural gas cost from Southern California Gas Company increased to $3.75 per Therm from $1.15 per Therm cost in the same time period last year, 2022. Our utilities cost has increased over the last year but this month was the largest increase of over 200% and the largest cost we have ever experienced. We use a lot of natural gas to melt our die casting metal alloys in our manufacturing process. This Southern California Gas Company natural gas cost increase is the largest gas cost increase I have seen, as far as I can remember, in almost 30 years of owning Kinetic Die Casting Company. I have no choice but to include a gas energy surcharge on all Kinetic Die Casting Company invoices starting today. That gas surcharge will be updated monthly as our new gas bill arrives on the 22nd of each month.
Kinetic Die Casting Company, Inc. www.kineticdiecasting.com
6918 Beck Avenue, North Hollywood, CA 91605 sales@kineticdc.com 818-982-9200
Permalink: https://www.kineticdiecasting.com/kdc/natural-gas-cost-increases-january-2023/
Posted in Blogger, Business, Competitors, Customers, Die Casting Parts, newsletter, Supplier
Tagged #diecasting, #kineticdc
Leave a comment
February 2023 NADCA Meeting
University of California – Irvine on February 1st and February 2nd. North American Die Casting Association (NADCA) will be hosting the Die Materials Committee meeting and R&D Committee meeting. This is a great opportunity for NADCA Chapter 30 members to listen to the latest updates on NADCA research, network with suppliers and die casters, and tour the lab at the University of California – Irvine. The meetings are free to attend, but we ask that anyone attending please RSVP using the following link, so that we can plan accordingly.
NADCA Die Materials Committee
Wednesday, February 1, 2023 from 8:30 a.m. to 3:30 p.m.
NADCA R&D Committee
Thursday, February 2, 2023 from 8:30 a.m. to 2:30 p.m.
The meeting will be held at University of California – Irvine, CA 92697
Register using this link: https://forms.gle/NKiF3gcBGNzAXWtj9
(if you cannot access Google Forms please send an email to glim@diecasting.org)
Beau Glim
Project Manager
North American Die Casting Association
847-808-3164
February 2023 North American Die Casting Association (NADCA) Meeting
