Die Casting Porosity and Its Causes. Die Casting porosity is one of the most common defects in the die casting manufacturing industry. What is die casting porosity? Die Casting porosity is a kind of die casting factory imperfection in which …
Continue reading
Pioneer Diecasters History
My previous article from 09.21.22 I announced my disappointment that Pioneer Die Casting Company closed ” Pioneer Diecasters Inc Closing ” In 2012, I had lunch with the owner of Pioneer, Carl H. Spahr, and he detailed much of the history he has had at Pioneer Die Casting Company since he started working there.
They were open over 80 years ago and incorporated in the state of California for over 70 years. Carl’s father started doing business as Pioneer Diecasters the 1930s and according to public records, he incorporated as Pioneer Diecasters, Inc on February 23, 1949.
Mr. Spahr worked closely with Lefty Harris around that time in the 30s. Lefty started Arrow Die Casting Company later. Carl started working at Pioneer in the 1940s or 1950s. They were primarily operating in the aluminum die castings business.
During our lunch, in June of 2012 Carl said he was in his early 70s. Pioneer Diecasters company employed about 17 people at the time. He had a very lean manufacturing operation. Carl said he visits the plant two or three days a week. He has a good manager that has been with him over 20 years and he runs everything. Carl said over the many years of running the company he has had issues with legal labor disputes in the 50’s, problems with the IRS in the 60’s and litigations from disgruntled employees in the 80’s. These were difficult times on occasion, but Carl said he still loved owning Pioneer Diecasters, Inc.
Pioneer Diecasters 4209 Chevy Chase Drive, L.A., CA 90039
I am saddened to see the loss of another die casting company competitor in California.
Kinetic Die Casting Company, Inc.
6918 Beck Avenue, North Hollywood, CA. 91605
sales@kineticdc.com 818-982-9200
Posted in Blogger, Business, Competitors, newsletter
Tagged #diecasting, Aluminum Die Casting Company
Leave a comment
Making Aluminum Lighting Fixtures in 2022
Making Aluminum Lighting Fixtures
Aluminum is the choice of many companies in creating the various products that they offer their customers because this metal alloy has the characteristics most, if not all manufacturers are looking for. First of all, aluminum is very light compared to other metal alloys, but at the same time, it is very durable and very strong. This metal alloy can last for a long time. Also, this metal is cheap, making it ideal for mass production. With that, Aluminum Lighting Fixtures are usually needed in bulk orders.
Aluminum Lighting Fixtures come in several shapes and sizes such as standing fixtures, recessed light fixtures, troffer lighting fixtures, wall-mounted lighting fixtures, and others to name a few. These are used in almost any manmade structure such as tunnels, houses, and buildings, which is why they are usually ordered in bulk. To meet this high number, the best way to create them is by die casting. This is the process by which a metal is cast to form a different shape.
Die casting starts off by exposing the aluminum to extremely high temperatures so that it will become liquid. This liquid would then be poured into pre-prepared molds that will shape the liquid into the desired part. After the mold is filled, it will then be set to cool down. Once the mold or casting cools down, the aluminum inside would then harden, and then you have brand new Aluminum Lighting Fixtures. This process is fast and cheap as well which is why it is ideal for making lighting fixtures.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
REACH and RoHS 3 Compliant 2022
Kinetic Die Casting Company Parts use RECYCLED Materials in our die casting metal alloys. Kineticdc complies with the EU RoHS 3 standards. Die casting alloys have less than 0.1% of any of the REACH chemicals.
REACH
Registration: Chemical producers are required to register safety data for all chemicals produced.
Evaluation: Experts from member states and the European Agency evaluate safety data for higher volume chemicals and other chemicals of concern.
Authorization: Chemicals that are “substances of very high concern” (SVHC) are to be phased out and replaced with safer alternative chemicals.
Chemicals Restriction: Chemicals may be completely banned or some uses of the chemicals can be restricted
RoHS REACH Compliant
REACH and RoHS 3 Compliant 2022
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s chemical regulation that requires that chemical substances on their own, in preparations and all intentionally released substances from articles must be registered with the European Chemicals Agency (ECHA).
The regulation applies to substances manufactured in, or imported to the EU in annual quantities of 1 ton or more. According to the REACH requirements on Substances of Very High Concern (SVHC) a supplier of manufactured and imported articles shall provide customers with information on SVHC if they are present above a concentration limit of 0.1 % on an article level. SVHC will be defined through the list of candidate substances for authorization that is produced by the European Chemicals Agency.
Permalink: https://www.kineticdiecasting.com/kdc/reach-and-rohs-3-compliant-2022/
#RoHS #REACH #kineticdc #alloys
What is Aluminum Heat Sinks in 2022?
What is Aluminum Heat Sinks
Aluminum heat sinks draw heat from another source through thermal contact. These are mainly used in electronics and automobiles but there are other uses like:
• Airplane parts
• Circuit boards
• Microwaves
• Cell phones
• Satellite components
• Laser components
• Motor housings
• Automotive
• Lighting parts
Heat sinks absorb and dissipate heat from another object. It is a piece of molded aluminum or copper that usually sits directly on top of a feverish source or processor. In many cases, you won’t be able to see the processor unless you take out the heat sink first.
Wherever there is a need for efficient dissipation of heat, there will surely be heat sinks installed. A major industry that uses heat sinks is refrigeration.
The heat sinks manufactured these days come in different shapes and sizes. The typical heat sink though has long fins and thin protrusions for conducting the heat from the processor to the cooler environment inside the aluminum heat sink.
Most of the heat sinks in the market these days are equipped with fans that blow the cool air to the fins to dissipate heat more effectively. These fans or blowers are usually placed on top of the fins or in the middle. Heat sinks like these usually cost around $25 or higher.
Aluminum heat sinks are designed to require less machine processing. The fins can be manufactured simultaneously with the mounting holes. Typically, about 250 to 2500 heat sink parts can be produced per day.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
What Are Die Casting Parts?
Die Casting Aluminum Heat Sinks
Aluminum Boxes Diecastings
Sponsored Listings:
House in Florida
Die Casting Companies in California 2022
With the closure of Pioneer Diecasters this year, I can find only 14 active die casting companies in Southern California. In 1994, when I founded Kinetic Die Casting Company, there were 76 die casting companies in California. Now there are only 14 companies in Southern California.
Sorted alphabetically, here is the current list of the competing die casting companies remaining in Southern California:
1. Alloy Die Casting Company
2. Aluminum Die Casting Company
3. Ambritt Die Casting Company
4. American Die Casting Company
5. California Die Casting Company
6. Cast-Rite Die Casting Company
7. Die Cast of America Company
8. Dynacast Company
9. Hyatt Die Casting Company
10. International Die Casting Company
11. Kenwalt Die Casting Company
12. Kinetic Die Casting Company
13. Pacific Die Casting Company
14. RSG Die Casting Company
Kinetic Die Casting Company
(800) 524-8083
sales@kineticdc.com
Recently Closed Die Casting Companies:
Bucy Die Casting Company Closed
Commercial Die Casting Company
Alloy Die Casting Company Sold
Cox Die Casting Company Closed
Rangers Die Casting Company Closed
CEP Cast Engineered Products Closed
Pioneer Diecasters Inc Closing
Posted in Blogger, Business, Competitors, newsletter
Tagged #diecasting, Die Casting Company
Leave a comment
