Tony Capaccio of Bloomberg Business News reported last week that Boeing may end up spending $300 million more than is budgeted under its contract to develop a new Air Force aerial-refueling tanker. Bad news for taxpayers, right? Wrong — because …
Continue reading
Die Casting Aerospace Parts 2021
Kinetic Die Casting Company makes several types of Die Casting Aerospace Parts. These aerospace die casting parts are used for many types of purposes. Some of these parts are used on many types of aircraft, such as: airplanes, jet planes or helicopters.
Aircraft manufacturers typically specify aluminum die casting to make the aerospace parts because aluminum is lightweight and inexpensive as well as very strong.
- Lightweight – Aluminum weighs only .098 pounds each cubic inch of material as compared to zinc which weighs about 2.44 pounds each cubic Inch.
- Inexpensive – Aluminum is the third most common element on earth, so it is more available than other materials. Aluminum is used in over 80% of all die castings produced in the world.
- Strong – Aluminum parts can be geometrically designed to be stronger than steel. Look up “aluminum is stronger than steel” on Google to see the results.
These aerospace parts range from: airplane engine piston heads, airplane distributor cap housings, fuel system parts, detention ring parts, cargo loading housings, lighting fixture parts, electronic enclosures, electronic housings, motor housings and various other aluminum die casting parts.
The companies that trust us to purchase their die casting parts from Kinetic Die Casting Company are many.
- Here are a few of the aircraft and aerospace companies that we can name:
- Robinson Helicopter
- Ancra International
- Whittaker Controls
- AAR Cargo Systems
- Boeing Aerospace
- Barry Controls
- Meggitt Aerospace
- Parker Hannifin Aerospace Corporation (Parker FSD)
- Circle Seal Aerospace
- Kelly Aerospace
- Curtiss Wright
- Honeywell
- United Technologies Aerospace
Low Quantities.
Many of these companies order lower quantities. One of the companies listed here will order less than 50 parts at a time. Many of these companies order 250 parts or less. Kinetic Die casting will accept any purchase order quantity.
Contact Kinetic Die Casting Company when you need any of the following: Low Quantities, Great Quality, Fast Delivery.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, CA 91605
Aerospace Die Castings and Aircraft Die Castings
Die Casting Aerospace Parts
Airplane Die Casting Parts
Die Casting Aerospace Part Pictures
Airplane Die Casting Part Pictures
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200
Die Casting Aerospace Parts Prices
Posted in Aircraft Parts, Blogger, Diecasting Process, newsletter
Tagged #diecasting, #kineticdc, Aircraft Parts, Airplane Castings, Airplane Parts
Leave a comment
Die Cast Tooling Mold Bases in 2021
Kinetic Die Casting owns several Die Casting Tooling Mold Bases that we use to produce aluminum die casting parts. These die cast mold bases are convenient for use for customers who own die casting tooling inserts but not a die cast mold base to use in a die casting machine. Some of the moldbases we own are as small as 12″ by 12″ and are as large as 36″ by 36″. Kinetic Die Casting also owns DME unit dies and MUD bases. DME unit dies are available in many sizes. Kinetic Die Casting primarily uses two DME Unit Die sizes:
- 10″ x 12″ DME Unit Die
- 12″ x 15″ DME Unit Die
Kinetic Die Casting will mount “customer owned” die cast tooling inserts into our mold bases so we can produce aluminum die casting parts. We can mount inserts ranging in sizes from 3″ to 20″ and all sizes in between. If a customer contacts us and they own die casting tooling inserts only, we can make parts for them. We have also made die cast tooling inserts for customers that will fit our mold bases. The tooling inserts are many types, like:
- Guitar Amplifier Housings
- Chocolate Fountain Heaters
- Golfing Products
- Aluminum Boxes
- Aluminum Heatsinks
- Aluminum Hardware
- Military Parts
- Aluminum Auto Parts
- Aluminum Aircraft Parts
Die Casting Tooling is the greatest cost barrier to producing aluminum die cast Custom Metal Parts. The die cast die mold base is a very large percentage of the die cast tool cost. Kinetic Die Casting uses our die casting mold bases to save money for our customers, so they can get the die casting parts they need.
Kinetic Die Casting has Die Casting Tooling Mold Bases
The Advantage of Aluminum Lighting Parts over Plastic in 2021
The advantages of Aluminum Lighting Parts over plastic. With the invention of plastic, a lot of materials are being replaced for it. From wood to metal, each and every kind of instrument has a plastic equivalent. Because of the cost of wooden cabinets and shelves, there are now plastic equivalents. There are also plastic versions of instruments like flutes, harmonicas, etc. Toys are mostly plastic because they can easily be sanitized. They stay clean and do not rot like wood or rust like metal. However, for some, metal is still preferable and necessary.
For lighting parts, some may see that aluminum has advantages over plastic. Of course, not all metals will be better than plastic. There are some that are really inferior and will not compare to plastic in any way. However, a premium metal like aluminum will fair well against plastic.
For starters, plastic is sturdy and aluminum is too. It is actually stronger than plastic. Next, plastic does not rot. Aluminum, out of all the other metals, rust rarely because of its special properties. The advantages of Aluminum Lighting Parts over plastic are more on the aspect of the environment. Both are non-biodegradable and are recyclable. However, plastic is expensive and difficult to recycle. It may also produce noxious gases when recycled. Aluminum recycling is widespread and has helped reduce the amount of aluminum waste in the planet. This is why aluminum lighting parts may be better than plastic.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a california die casting company that manufactures die cast parts. If you would like more information or request a quote, vist our website:Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Manufacturing
American National Die Casting Parts
Die Casting Business
Zinc Die Casting Company Blog
Posted in Die Casting Parts, Plastic Parts
Tagged #diecasting, #kineticdc, #plasticparts, aluminum, Plastic Parts
Leave a comment
Examples of Aluminum Hardware Brackets 2021
Examples of Aluminum Hardware Brackets You finally bought your dream mirror from a nearby department store. You just can’t wait to have it installed. However, something seems to be missing. Before you mount that mirror and ask who’s the fairest of all, you need to buy brackets for it!
Hardware brackets are used either as an accessory or as an aid for furniture that need to be mounted on the wall. It assists in carrying the weight of the furniture, so that the wall wouldn’t have cracks after mounting. Mostly made of aluminum, these brackets can come in many forms and can also be installed in many ways, like towel holders that can be stuck on the wall by a special adhesive tape and mirror holders that are screwed on the wall.
One example of an aluminum hardware bracket would have to be Minn Kota quick release brackets, which are easily mounted with a set of screws. It contains a secure locker system which prevents the furniture from falling off. Once the furniture is mounted with these brackets, they can also be removed easily without having to unscrew the brackets.
The C.R. LAURENCE CC5CH CRL shelf brackets are also an outstanding product. These shelf brackets are mounted on the wall using adhesive tapes and optionally, with a set of screws, so they can be easily installed. This set of brackets is also made from aluminum.
These are only a few examples of aluminum hardware brackets. There are lots of these in the market, so go and by one now.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at E-mail sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting makes great quality aluminum, and Zinc Die Casting If looking for a job or would like a quote please visit our website:Kinetic Die Casting Company
Die Casting Brackets and Die Casting Handles
Bracket Die Castings
Handles as Die Castings
Die Casting Parts Pictures
Kinetic Die Casting Company Blog
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200
Die Casting Brackets Prices
Posted in Blogger, Bracket, Handle
Tagged Aluminum Brackets, Aluminum Enclosures, Aluminum Handles, Handle, Hardware
Leave a comment
Kinetic Die Casting Company Makes Aluminum Auto Parts 2021
Kinetic Die Casting Company Makes Aluminum Auto Parts – A few months ago, an automotive parts customer contacted me; he makes aluminum hydraulic pumps for cars. He asked if he could move his die casting tooling inserts from his current die casting supplier to Kinetic Die Casting Company. He is getting over 50% leakage rejects from his current die casting supplier due to porosity. His product is prone to porosity because it has very thick material areas and very thin material areas. It would take a special effort to improve his production part process.
We gave him a price that was higher than he was currently paying and he agreed. What happened then was, he sent us his tooling inserts and we mounted his die casting inserts in our mold base and made his aluminum automotive pump parts. He was shocked at the difference. He had very few parts that leaked. We succeeded because we process every die casting job as a special job. Our single piece flow has also become single order flow.
I received this same request from that same customer this week, on a different part. He is also losing over 50% of his parts due to porosity leakage in his pumps. He now knows we can help him. The part cost is higher, but his total cost is much lower because he has fewer failures in his product.
Contact Kinetic Die Casting if you are getting bad products and we will help you.
Kinetic Die Casting Makes Aluminum Auto Parts
Die Casting Auto Parts
Die Casting Car Parts
Manufacturing Die Casting Parts
Aluminum Die Casting Company
Photos Die Casting Car Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200
Die Casting Automotive Parts Prices
Posted in Aluminum Die Casting, Auto Parts, Blogger, newsletter
Tagged #diecasting, #kineticdc, aluminum, Aluminum Auto Parts, die casting, Die Casting Process
Leave a comment
