Kinetic Die Casting makes Aluminum Heat Sinks Die Castings. Heat sinks are a very important part of personal computers and portables. It is a small box located near the processor. As the wires inside the computers perform their designated functions, …
Continue reading
Die Casting Tooling: 4 Types of Dies 2020
Die Casting Insert Molds
Die Casting Tooling: 4 Types of Dies. Dies, or more appropriately termed as die cast tooling, are one of the most essential parts when it comes to die casting. Naturally, you cannot make a certain alloy component without creating the perfect mold – which is why dies are also often called die casting molds. The actual creation of dies begins with the blueprint of the piece or pieces that is to be developed. This is not as easy as it sounds. Very stringent measures are undertaken to make sure that the dies fit every configuration of the overall design. Often the blueprints, the die casting tooling and the corresponding pieces that come from the first two have to be worked over until the perfect pieces are achieved. Only then can mass production of the said pieces can continue.
As such there are 4 known existing types, and these are: single cavity die, multiple cavity die, unit die and the combo die or the combination die.
Single cavity die casting mold, as the name implies, refers to mold that is often used in the creation of a single component. Usually, the very large pieces of metal works are created from single cavity die to ensure that the pieces are “flawless.” On the other hand, multiple cavity die refers to molds that have smaller components but are identical in design. This type of die is more economical when it comes to mass production of smaller pieces.
Unit dies are best for the creation of different pieces that would be fitted to create one larger piece, or unit. This is best for the medium to small pieces as well. Lastly, there is the combo die. The combo die can be a mix of two of the aforementioned dies above or all three. This is great for assembly line production.
Kinetic Die Casting Company can manufacture aluminum car parts, aluminum hardware, and Aluminum Lighting Partsaluminum lighting parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: Fax Number
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Manufacturing
American National Die Casting Parts
Die Casting Business
Zinc Die Casting Company Blog
Are Aluminum Die Casting Parts stronger and cheaper than Steel in 2020?
Are aluminum die casting parts stronger and cheaper than steel?
How can an aluminum die cast part be stronger than a steel weldament? Kinetic Die Casting, Inc. makes an aluminum die casting Boomerang cam lever part for a lift manufacturer that once was a two pound steel welded unit. This unit consisted of two steel plates, 1/8″ thick, with holes drilled, tapped, and welded to steel spacers with a bushing at each end, then painted. Occasionally, these units would fail in the field. Manufacturing costs ran about $7.00 per part in production quantities of 1,000 each week. Another difficulty is that it took three to four weeks to make the first steel part and only a few 100 could be produced a week. This hindered increased sales.
Kinetic Die Casting now produces these parts in aluminum die casting that weigh only 3/4 pounds; the steel unit weighed over two pounds. The aluminum die casting parts are stronger (3x greater axial load) and more reliable. There is no need for paint on the aluminum die casting parts. The Kinetic Die Casting part price of each die casting unit is less than $3.00.
Kinetic Die Casting can help you develop an aluminum die casting that will reduce weight, increase strength, and cost you less money.
Advantages of the Aluminum Die Cast Part over the Steel Weldament:
- 3x greater axial load strength.
- Fewer part failures in the field and fewer returns to the OEM.
- Part weight is 2.5x less in aluminum saving money in shipping cost.
- Production quantities (1,000’s) within a few days instead of weeks as before.
- Production rate is faster as an aluminum die cast part.
- Raw part manufacturing cost is 2.3x less as an aluminum die cast part.
- Finishing cost is less as an aluminum die cast part.
- Better looking parts as a die cast part.
- More details here https://www.kineticdiecasting.com/steel.html
Kinetic Die Casting manufactures die cast parts for their customers. If you would like to know more about what is die casting or if you would like a quote, please visit our website:Kinetic Die Casting Company
Steel Parts or Plastic Parts or Die Casting Parts
Metal or Plastic Parts
Custom Metal Part Castings
Die Casting Parts Porosity
Die Casting Pats Photos
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Part Prices
The Advantages of Aluminum Military Parts over Plastic 2020
The Advantages of Aluminum Military Parts over Plastic. Being in the military force is a life-threatening job. Together with this risk is the honor of saving one’s territory, which is one of the reasons why a number of men choose this as their career path. However, their success does not depend on their skills alone. The equipment to be used should also be considered.
To help them in fulfilling their goal, they should know the advantages of aluminum military parts over plastic military parts. Why?
Plastic military parts may be cheaper, but it cannot match the advantages given by aluminum military parts.
Aluminum military parts can withstand prolong stocking periods. When not in battle, the equipment tend to be stored in the barracks. Unfortunately, some of these fade quickly in terms of quality and usability. It is because some parts are made of a special plastic which is not capable of keeping its condition over time. Aluminum does this, even if exposed to strong chemicals.
Moreover, plastic parts are highly vulnerable to damage due to strong impacts. For instance, a rifle had to be dropped. The damage it can give to an aluminum part would not be that strong, but it would be the other way around for a plastic part.
These are only a few of the many advantages of aluminum military parts over the plastic military parts.
Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a die casting company specializing in aluminum and zinc parts. If you would like to request a quote, please visit our website:Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Zinc Die Casting Parts
American Die Casting Company
Die Casting Prices or Sand Casting Parts
SuperJob For You
Posted in Aluminum Die Casting, Plastic Parts
Leave a comment
Pressure Die Casting Aluminum Military Parts 2020
Pressure Die Casting Aluminum Military Parts vs Sand Casting. The military is an important part of any nation. State of the art technology gives a country a heads up against other possibly invading or threatening army. And with the invention of weapons of mass destruction, powerful nations keep outdoing each other when it comes to military technology.
Mostly, military equipment and weapons are made of sturdy metal. Precision is important, that is why the technology of making military parts is also important.
For aluminum parts, cold chamber pressurized die casting is used. In Pressure Die Casting Aluminum Military Parts vs Sand Casting, surely die casting is the better option. Sand casting is one of the oldest ways of molding heated metal. While this is still a reliable method, its products are not as good as die casting. First, the surface is not as polished. The sizes and parts are also not as accurate as planned. The sand makes the military parts rough in surface. It will need a lot of other processes to make it polished.
With die casting, aluminum parts are sure to be precise in size and parts. Complicated designs are complete, with every crevice and tiny part intact. Sizes will be 99% accurate. This is very important for military parts.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is located in Southern California. KDC specializes in aluminum and zinc die casting tooling. If you would like a quote, please visit our website:Kinetic Die Casting Company
Die Casting Military Parts
Military Die Castings
Die Casting Part Pictures
Military Die Casting Photos
Buy American Die Casting Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Military Parts Prices
Aluminum Door Handles are Hardware 2020
Aluminum Door Handles
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Die Casting Quality Standards
Die Casting Porosity
Die Casting Draft Angle
Die Cast Parts Company
