Here is the basic limitations of buying die casting parts from Kinetic Die Casting Company Aluminum Die Casting Alloys (90% of our business) A360 aluminum (Mostly used for Automotive and Lighting including low copper A360) A380 aluminum (Most common alloy) …
Continue reading
Aluminum Car Radiators 2020
Aluminum Car Parts
A small leak on your car Radiator can be indicating a larger problem. A cooling system that runs low too often is less efficient and you can damage your cooling system by letting the coolant level get too low. Too little coolant flow can be bad, but at normal and high operating temperatures, the rate at which coolant moves through the radiator does not change the amount of heat that is dissipated by the cooling cores. The amount of cooling will not be reduced even when the mean temperature of the coolant rises and flows faster.
Many cheap coolants do not have the corrosion protection, PH balancing, or sediment prevention that the top-quality coolants do. These low quality coolants do not have the same additives of name brand coolants. To help your engine stay cooler, rev up your engine slightly when you are overheating in traffic to help push more air across the cooling cores and more coolant through the engine.
All water-cooled car radiator parts have an automatically controlled electric fan on the radiator. The way the system is supposed to work is that, after the engine is started, the thermostat on the engine stays closed until the coolant temperature at the ENGINE reaches 87C (189F) degrees. It is the responsibility of the Radiator to keep the coolant temperature from running too high. However, if the temperature is too high it is not necessarily the radiator.
A poor radiator cap will not last as long or stay properly calibrated, and either open at too low or two high a pressure. Make sure your radiator cap is the proper one for your cooling system. Higher pressure means a higher boiling point, which means more efficient cooling. A new radiator cap is usually all that is required for this (but don’t over pressurize your radiator cores and wreck the whole system).
Most Car Radiators’ cooling system failures arise from poor radiator maintenance. Many radiator problems can be prevented with regular maintenance and periodic professional inspections of you car radiator and cooling system. The most common radiator problems are: leaky fittings or seams, fin deterioration and bond failure, electrolysis, cracked tank, and fan damage.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Aluminum Parts or Plastic Parts
Military Die Casting Parts
Die Casting Tooling
Blogspot Kineticdiecasting
Labor Day Weekend 2020
Kinetic Die Casting Company will be closed today, Monday September 7, in observance of Labor Day.
Some fun facts from the US Department of Labor (https://www.dol.gov/laborday/history.htm)
Closed Labor Day 2018
The first Labor Day holiday was celebrated on Tuesday, September 5, 1882, in New York City, in accordance with the plans of the Central Labor Union. The Central Labor Union held its second Labor Day holiday just a year later, on September 5, 1883.
In 1884 the first Monday in September was selected as the holiday, as originally proposed, and the Central Labor Union urged similar organizations in other cities to follow the example of New York and celebrate a “workingmen’s holiday” on that date. The idea spread with the growth of labor organizations, and in 1885 Labor Day was celebrated in many industrial centers of the country.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Permalink: https://www.kineticdiecasting.com/kdc/closed-labor-day-2018/
Kineticdc makes:
Aluminum Die Casting Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Holiday at Kinetic Die Casting Company
Die Casting Company
Kinetic Die Casting Company Jobs
American Die Casting Company
Die Casting Company Information
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices
Posted in Blogger, newsletter
Tagged #diecasting, #kineticdc, American Business, Die Casting Company, Kinetic Die Casting Company
Leave a comment
Aluminum Auto Parts and Car Parts 2020
Auto Parts and Car Parts and Automotive parts. Car Parts or Auto parts in aluminum are 1/3 the weight of steel parts. Aluminum auto parts are formed from a few hundred to thousands of auto parts a day. Many features of the automotive part are manufactured “net shape” to save the cost of useless materials and the additional labor of machining. Mounting holes are usually produced into the aluminum auto part during production. also saving cost. Many of the primary “tier one” automotive manufacturers have their own manufacturing plants. They also purchase aluminum automotive parts from companies such as Kinetic Die Casting Company.
Good news for Chevy parts, Toyota parts, Nissan parts, Honda parts and Jeep parts users! Auto Parts Train, the country’s leading auto parts dealer is now selling these top quality auto parts at the lowest prices. While you get satisfied from the auto parts’ superior quality and performance, you can also save from Auto Parts Train’s hottest deals on these products. Up to 50% discounts are offered plus you get more choices as Auto Parts Train includes auto parts for older and the most recent models.
http://www.kineticdiecasting.com/automotive_part_pictures.html
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Die Casting Auto Parts
Die Casting Car Parts
Manufacturing Die Casting Parts
Aluminum Die Casting Company
Photos Die Casting Car Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Automotive Parts Prices
Posted in Auto Parts, Blogger, Die Casting Parts, newsletter
Tagged #diecasting, Aluminum Auto Parts, auto parts, automotive, die casting, Manufacturing
Leave a comment
Aluminum Heatsink Heat Dissipation 2020
Heat dissipation is the job aluminum heat sinks perform. Heatsinks are typically used in locations where heat needs to be dissipated such as in hydraulics and more typically in electronics applications. In hydraulic applications, heatsinks use air cooling or water cooling to assist in extracting the heat from the protected device. In electronic applications, heatsinks are more commonly expected to work using air-flow to extract heat.
Aluminum heatsinks are commonly made using aluminum die casting. Aluminum die cast heat sinks are manufactured near net shape, meaning these heat sink parts require very little additional machining to use in the desired application. These aluminum heatsinks can be produced at the rate of thousands each day. In many cases, these heat sinks can be installed and used without any additional finish such as powder coat or anodize.
Some heatsinks have been used in computers to remove heat from the electronic circuitry, this extends the life of the “motherboard”. One of the early applications of a heat sink was the aluminum shroud on the television picture tube to extend the life of the picture tube. Now, aluminum heatsinks are designed in most electronic applications to protect the devices from the heat that is naturally generated when electricity interacts with electronic circuits. Many times these heatsinks are incorporated in the enclosure or housing that holds and protects the electronic circuits. This would take advantage of incorporating two devices into one, thus saving money doing so.
When fluids are placed under extreme pressure, heat is generated. Heatsinks are used to prevent damage to the bearings or other moving parts in the hydraulic device.
Kinetic Die Casting makes great quality aluminum, and Zinc Die Casting If looking for a job or would like a quote please visit our website:Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Light Fixture Die Casting Parts
Photos Die Casting Parts
Aerospace Die Casting Parts
Roofing Tile Molds Blog
Posted in Aluminum Heatsinks
Tagged #diecasting, #kineticdc, Aluminum Heatsinks, Heat Sinks
Leave a comment
Die Casting Zinc Alloys Quick Info in 2020
Die Casting Zinc Alloys Quick Info. Die casting zinc alloys is a common practice amid metalworkers due to the fact that zinc alloys have several uses. 
Zinc has decent properties: it doesn’t rust, it is light yet durable, it’s non-corrosive, it is multipurpose, and it is easily flexible. Zinc may be shared with other materials such as aluminum, copper, magnesium, and tin, to state a couple. Their arrangements accomplish definite effects dependent on the quantities and types of materials used and the die casting process.
To die cast zinc metals, zinc and other alloys are joined via chemical developments and heated under high temperatures to become fluid. When they attain this molten state, they are forced to pour into die casts where they take on the mold’s design. Upon cooling, the metals keep the shape and stay that way until they are heated again. Here are some ways that zinc alloys are used:
• To coat metal items and guard them from corrosion
• To protect electrical pieces
• To form unbending metal components
• To substitute costly metalworking supplies
• To help as a lightweight alternative for some metal materials
Die casting zinc alloys are worthwhile in generating a lot of things, such as fixtures, vehicles, equipment, tools, weaponry, etc. It is chosen to other means of creating zinc alloys because die casts make it easier for the alloys to be shaped exactly in a little time. Also, it doesn’t take much exertion to pour molten alloy into the cast and let them set resolutely as matched to forging and hammering. Because of its various benefits, die casting zinc alloys has continued to be a extensive practice in metallurgy.
This is the blog on the Kinetic Die Casting Company web site. We make several types of Aluminum Handle Parts. Look at this website page for more details: www.kineticdiecasting.com/handle.html. Contact Kinetic Die Casting Company at 818-982-9200 or email us at sales@kineticdc.com. Use this webpage to request “die casting part prices” www.kineticdiecasting.com/replyform.html
Do you need fast delivery for military die casting parts? Kineticdc shipped military parts that were die castings with impregnation, chemical filmed and machined in less than two weeks from receipt of a purchase order. Know someone that wants to buy die cast parts and can use our die casting services?
Call us and let us know 818-982-9200.
Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 91605
www.kineticdc.com #diecasting #kineticdc #manufacturing @kineticdc #zinc
Kineticdc makes:
Automotive Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Alloys
Die Casting Alloys
Die Casting Metals and Technical Terms
Die Casting Technical Information
Die Casting Aluminum Parts
Die Casting Zinc Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices
