Aluminum Die Casting Parts Porosity – Porosity in Die Castings There are many forms of Die Casting Porosity, many are caused by these die casting variables: Metal Temperatures and Mold Temperatures. Material Cleanliness. Die Casting Mold Design. Die Casting Part …
Continue reading
Aluminum Die Casting Radiator: Aluminum Die Casted Car Parts: 2020
Aluminum Car Part
Your car radiator is the primary cooling mechanism for your engine. Radiators are a simple and elegant solution to the need for engine cooling. Car radiator parts are mostly made of aluminum. Light and strong, aluminum is great for making car radiators. It is the material of choice for most of today’s radiators. Light and intelligently designed, aluminum radiators are standard on many of today’s new cars and trucks. Aluminum Car Parts
A small leak on your car Radiator can be indicating a larger problem. A cooling system that runs low too often is less efficient and you can damage your cooling system by letting the coolant level get too low. Too little coolant flow can be bad, but at normal and high operating temperatures, the rate at which coolant moves through the radiator does not change the amount of heat that is dissipated by the cooling cores. The amount of cooling will not be reduced even when the mean temperature of the coolant rises and flows faster.
Many cheap coolants do not have the corrosion protection, PH balancing, or sediment prevention that the top-quality coolants do. These low quality coolants do not have the same additives of name brand coolants. To help your engine stay cooler, rev up your engine slightly when you are overheating in traffic to help push more air across the cooling cores and more coolant through the engine.
All water-cooled car radiator parts have an automatically controlled electric fan on the radiator. The way the system is supposed to work is that, after the engine is started, the thermostat on the engine stays closed until the coolant temperature at the ENGINE reaches 87C (189F) degrees. It is the responsibility of the Radiator to keep the coolant temperature from running too high. However, if the temperature is too high it is not necessarily the radiator.
A poor radiator cap will not last as long or stay properly calibrated, and either open at too low or two high a pressure. Make sure your radiator cap is the proper one for your cooling system. Higher pressure means a higher boiling point, which means more efficient cooling. A new radiator cap is usually all that is required for this (but don’t over pressurize your radiator cores and wreck the whole system).
Most Car Radiators’ cooling system failures arise from poor radiator maintenance. Many radiator problems can be prevented with regular maintenance and periodic professional inspections of you car radiator and cooling system. The most common radiator problems are: leaky fittings or seams, fin deterioration and bond failure, electrolysis, cracked tank, and fan damage.
Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include Ricon V2-AC 090 Cam Arms, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
Kinetic Die Casting Company makes:
Light Fixture Die Casting Parts
Photos Die Casting Parts
Aerospace Die Casting Parts
Roofing Tile Molds Blog
Posted in Aluminum Die Casting, Auto Parts, Die Casting Company, Die Casting Parts, Diecasting Process
Tagged #diecasting, #kineticdc, aluminum, Aluminum Auto Parts, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts, auto parts, car parts, Diecasting Process, Kinetic Die Casting Company
Leave a comment
Fathers Day Special Final Week
This is our final week of our 2020 Fathers Day Almond Roca candy for Purchase Order Special. Our Fathers Day Almond Roca Special continues and is open to all our customers. For every purchase order (PO) we receive by July 2, the buyer will receive a half pound bag of our world famous Almond Roca Candy. This is our 2020 Fathers Day Almond Roca Special. If anyone sends two purchase orders, they will receive two bags and three for three.
For every purchase order (PO) the buyer receives a bag of Almond Roca. Email us (sales@kineticdc.com) a PO or an additional PO to add your name to our list the next week.
List of Almond Roca Recipients:
|
01. Joana M. 04. Terry T. 07. |
02. Michael G. 05. Nancy C. (#2) 08. |
03. Nancy C. 06. Bernie P. 09. |
Permalink: https://www.kineticdiecasting.com/kdc/fathers-day-special-final-week
Fathers Day 2020 Die Casting Parts and Almond Roca Special: From now until the end of July 2nd 2020, we will be sending a half pound bag of yummy homemade Almond Roca to our customer’s company buyers for any new purchase orders (POs) for production die casting parts and for die casting tooling purchase orders. Purchase Orders received from now to July 2nd qualify for the free candy. If you have never received our homemade candy, now is the time to get some, by placing purchase orders you need to place anyway.
homemade almond roca
To get die casting prices:
https://www.kineticdiecasting.com/replyform.html
Kinetic Die Casting Company
6918 Beck Avenue, North Hollywood, CA 91605
E-mail sales@kineticdc.com – Telephone: 1-818-982-9200
CEP Cast Engineering Products Closing
Today, I received the sad news that another local Southern California die casting company competitor is closing. CEP (Cast Engineered Products), is closing their doors. CAST and ENGINEERED PRODUCTS was located at 1746 West 135th Street, Gardena, CA 90249-2508 Telephone Voice:310.323.8460 Sales@cepUSA.com. I have known the owner, Ismail Cuhadar over 30 years. Ismail had over 35 years of experience in the die casting and metals industries. Ismail is a graduate of The University of Southern California and holds Master of Science and Professional Engineer degrees in Mechanical and Design Engineering. I met him when he worked at El Monte Tool and Die Casting Company. Ismail then went to Modern Die Casting Company / Sunny Die Casting Company before he started CEP.
In 1994, Ismail founded CEP in Downey, CA out of Modern/Sunny. Then in 2001, he moved its operations to the larger facility in Gardena, CA to manufacture aluminum and zinc die castings, bronze and copper-nickel porous powder metal parts and other engineered products. I always enjoyed spending time with Ismail, I wish him safety, health and happiness.
If your company is in search of a replacement die casting parts supplier, you can contact us at Kinetic Die Casting Company:
Kinetic Die Casting Company, Inc.
( https://www.kineticdiecasting.com )
1-818-982-9200
E-mail sales@kineticdc.com
6918 Beck Avenue
North Hollywood, CA 91605
Permalink: https://www.kineticdiecasting.com/kdc/cep-cast-engineering-products-closing/
Posted in Blogger, Business, Customers, Die Casting Company, Die Casting Parts, newsletter, Supplier
Tagged #competitor, #diecasting, Business, Die Casting Company
1 Comment
Fathers Day Special Continues
Our Fathers Day Almond Roca Special continues and is open to all our customers. For every purchase order (PO) we receive between June 15 to July 2, the buyer will receive a half pound bag of our world famous Almond Roca. This is our 2020 Fathers Day Almond Roca Special. If anyone sends two purchase orders, they will receive two bags and three for three.
For every purchase order (PO) the buyer receives a bag of Almond Roca. Email us (sales@kineticdc.com) a PO or an additional PO to add your name to our list the next week.
List of Almond Roca Recipients:
|
01. Joana M. 04. |
02. Michael G. 05. |
03. 06. |
Permalink: https://www.kineticdiecasting.com/kdc/fathers-day-special-continues/
Fathers Day 2020 Die Casting Parts and Almond Roca Special: From now until the end of July 2nd 2020, we will be sending a half pound bag of yummy homemade Almond Roca to our customer’s company buyers for any new purchase orders (POs) for production die casting parts and for die casting tooling purchase orders. Purchase Orders received from now to July 2nd qualify for the free candy. If you have never received our homemade candy, now is the time to get some, by placing purchase orders you need to place anyway.
homemade almond roca
To get die casting prices:
https://www.kineticdiecasting.com/replyform.html
Kinetic Die Casting Company
6918 Beck Avenue, North Hollywood, CA 91605
E-mail sales@kineticdc.com – Telephone: 1-818-982-9200
Posted in Blogger, Business, Customers
Tagged #diecasting, Almond Roca, Die Casting Parts
Leave a comment
Summer 2020
June 21 is the first day of summer and is called the Summer Solstice. This is the longest day of the year, we get the most daylight on this day than any other day of the calendar year. The Sun reaches its most northern point in the sky at local noon. After today, the days start getting shorter. The word solstice is from the Latin solstitium, from sol (sun) and stitium (to stop), reflecting the fact that the Sun appears to stop at this time (and again at the winter solstice).
Permalink: https://www.kineticdiecasting.com/kdc/summer-solstice-2020/
Holiday at Kinetic Die Casting Company
Die Casting Company
Kinetic Die Casting Company Jobs
American Die Casting Company
Die Casting Company Information
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices