Pressure Die Casting Aluminum Military Parts vs Sand Casting. The military is an important part of any nation. State of the art technology gives a country a heads up against other possibly invading or threatening army. And with the invention …
Continue reading
Tag Archives: Aerospace Parts
Aerospace Diecastings
Kinetic Die Casting Company makes several types of Die Casting Aerospace Parts. These aerospace die casting parts are used for many types of purposes. Some of these parts are used on many types of aircraft, such as: airplanes, jet planes or helicopters.
Aircraft manufacturers typically specify aluminum die casting to make the aerospace parts because aluminum is lightweight and inexpensive as well as very strong.
- Lightweight – Aluminum weighs only .098 pounds each cubic inch of material as compared to zinc which weighs about 2.44 pounds each cubic Inch.
- Inexpensive – Aluminum is the third most common element on earth, so it is more available than other materials. Aluminum is used in over 80% of all die castings produced in the world.
- Strong – Aluminum parts can be geometrically designed to be stronger than steel. Look up “aluminum is stronger than steel” on Google to see the results.
These aerospace parts range from: airplane engine piston heads, airplane distributor cap housings, fuel system parts, detention ring parts, cargo loading housings, lighting fixture parts, electronic enclosures, electronic housings, motor housings and various other aluminum die casting parts.
The companies that trust us to purchase their die casting parts from Kinetic Die Casting Company are many.
- Here are a few of the aircraft and aerospace companies that we can name:
- Robinson Helicopter
- Ancra International
- Whittaker Controls
- AAR Cargo Systems
- Boeing Aerospace
- Barry Controls
- Meggitt Aerospace
- Parker Hannifin Aerospace Corporation (Parker FSD)
- Circle Seal Aerospace
- Kelly Aerospace
- Curtiss Wright
- Honeywell
- United Technologies Aerospace
Low Quantities.
Many of these companies order lower quantities. One of the companies listed here will order less than 50 parts at a time. Many of these companies order 250 parts or less. Kinetic Die casting will accept any purchase order quantity.
Permalink: https://www.kineticdiecasting.com/kdc/aerospace-diecastings/
Contact Kinetic Die Casting Company when you need any of the following: Low Quantities, Great Quality, Fast Delivery.
“The Parts We Make Today, We Ship Today”
Aluminum Heat Sinks
Die Casting Car Parts
Aluminum Hardware Brackets
Aerospace Die Casting Parts
Military Die Casting Parts
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
2018 Aerospace Die Casting Parts
Did you know that Kinetic Die Casting Company makes Aerospace Die Casting Parts? We do!.
Kinetic Die Casting Company makes parts that are used for aircraft lights, airplane motor, aircraft cargo systems, aerospace electronics, and aerospace fueling systems.
Kinetic Die Casting Company manufactures several aerospace die casting parts of many types and sizes. Aerospace die casting parts are purchased from Kinetic Die Casting Company by aerospace manufacturing companies. The list of aerospace companies that uses parts that Kinetic Die Casting produced is very impressive.
Aerospace Parts as die castings
Here is a list of a few of our Die Casting Aerospace Parts customers:
https://www.kineticdiecasting.com/kdc/die-casting-aerospace-parts/
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
For die casting prices, click here:
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Diecast Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling Molds
Permalink: https://www.kineticdiecasting.com/kdc/2018-aerospace-die-casting-parts/
Kinetic Die Casting is Parker Aerospace AS9100C Approved
Kinetic Die Casting Company recently passed a quality audit by Parker Aerospace to confirm that we are AS9100C Compliant. The quality audit was strict and very detailed. The AS9100 Rev C audit took hours to complete. We are thankful that Parker trusts Kinetic Die Casting Company to make aluminum aerospace die casting parts for their company.
Who is Parker Aerospace? AKA Parker or Parker Hannifin (NYSE) PH. Parker was founded in 1918. Parker had sales of over $13 Billion in 2014. They are a world leader in aircraft and aerospace products. Parker Aerospace is a global leader in hydraulic, fuel, flight control, pneumatic, electronics cooling, and fluid conveyance components and systems and related electronic controls for aerospace and other high-technology markets. Parker’s products are used on aircraft manufactured throughout the world, including commercial transports, military fixed-wing planes, regional and business aircraft, helicopters, missiles, and unmanned aerial vehicles. Based in Irvine, California, Parker Aerospace operates 39 facilities in USA, Europe, and Asia. The latest programs include the COMAC C919, Rolls-Royce Trent XWB engine, Bombardier CSeries and Global 7000/8000, Embraer Legacy 500/450, Mitsubishi Regional Jet, Gulfstream G650, Model 850 Citation Columbus, and Airbus A350 XWB.
Kinetic Die Casting Company quality is Parker Aerospace AS9100C Approved. Parker is one of several aerospace companies that buy parts from our company. Take a look at the partial list of Aerospace Manufacturing Companies that trust and buy from Kinetic Die Casting Company.
Aerospace Parts Die Castings.
Parker Hannifin Die Casting Parts.
Parker AS9100 Rev C Approval.
Aerospace Parts Die Casting Images.
Contact us to give you a price for aerospace die casting parts.
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Monday Feb 22 We Deliver Almond Roca for Aerospace Die Castings
Did you know that Kinetic Die Casting Company makes Aerospace Die Casting Parts? We do. On Monday February 22, we will deliver Almond Roca to the buyer who purchased Aerospace Die Casting parts from our company.
We offered to give Homemade Almond Roca for any new purchase order placed in February 2016. Today, Monday February 22nd, we will be delivering Almond Roca to an Aerospace manufacturing company for placing a purchase order for 15,000 aluminum die casting parts as spacers. Thank you for the business.
Here is a list of a few of our Die Casting Aerospace Parts customers:
https://www.kineticdiecasting.com/kdc/die-casting-aerospace-parts/
Update On Ten Thousand Aerospace Parts In 4 Weeks
Last Monday 7/20/15, I wrote a newsletter about our goal to ship the 10,000 aerospace die casting parts in four weeks.
Here is an excerpt and a photo:
Kinetic Die Casting Company received a purchase order on July 13, 2015 from one of our Aerospace Part Manufacturing Company customers for ten thousand (10,000) aluminum die casting parts, delivery requested as ASAP (As Soon As Possible). These aerospace die casting parts have a special acme thread that needs to be completed, post processing. The parts are die trimmed, then the parts are vibra deburr finished, then we polish the parts and finally we put in the acme thread. We do a final inspection visually and with gauges, write the product certifications, pack and ship the parts…. READ MORE (https://www.kineticdiecasting.com/kdc/ten-thousand-aerospace-parts-four-week-delivery/)
Here is an update on that commitment: As of this week, we will have shipped 7,000 die casting parts of the 10,000 die casting parts on order. That delivery is two weeks earlier than projected. Kinetic Die Casting Company may even complete the purchase order this week. We take our requests for fast delivery serious. Our internal goal is to make and ship die casting parts in four weeks or sooner.
We would like to do the same for your company, give us a call. We accept purchase orders for 10 die casting parts, 10,000 die casting parts or up to 200,000 die casting parts in a year. We make parts in aluminum weighing from .01 pounds to about 10 pounds.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company makes aluminum die castings as Aerospace Die Castings. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
