In aerospace engineering, where innovation meets the infinite bounds of the sky, precision is paramount. From the engines that propel aircraft to the intricate components within avionics systems, every part plays a critical role in ensuring safety, efficiency, and performance. …
Continue reading
Tag Archives: Aluminum Auto Parts
GM Reacall For Car Fires
Over fears that an electrical fault could cause fire, General Motors has recalled more than 1.3 million vehicles in the United States, government documents showed on June 8.
The problem, linked to the vehicles’ windshield wiper fluid system, affects at least 18 models ranging from Chevrolet trucks to Hummers, documents from the National Highway Traffic Safety Administration showed.
Copyright Agence France-Presse, 2010
Kinetic Die Casting can manufacture aluminum automobile parts, heat sinks, aerospace parts and much more. If you are looking for aluminum or zinc parts, visit our website Kinetic Die Casting Company
How Are Aluminum Car Parts Made?
How Are Aluminum Automobile Parts Made? Cars needed to be in top quality since they are frequently used by people. To do this, every part that is included in the vehicle should also be of good condition. How do vehicle-producing companies make sure that their cars have the most durable parts?
They actually use aluminum, a metal that does not rust and slowly gets old. Given that they are provided with this kind of metal, how are aluminum car parts made?
Vehicle makers make sure that these aluminum automotive parts can withstand prolonged periods of heat exposure, since engines produce heat while the vehicles run on the road. These parts, before used for mass production, are tried and tested several times before it gets the cut. Once these parts are proven to be efficient heat diffusers, they are distributed for official production and become the standard for most cars.
Moreover, aluminum automotive parts should also be compact and easy to install. These products can be available in automotive stores, so a guide on how to place it in the car or in any other vehicles should be included in the package. On such occasions where installation is a tad difficult, service shops can offer fixes at small charges.
Keep your vehicle in top condition with aluminum automotive parts.
Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a aluminum and zinc die casting company. If you would like to know more information, please visit our website:Kinetic Die Casting Company
GM Automotive to Hire 245 Die Casting Employees
General Motors announced plans on April 27 to add a manufacturing line at a southern Indiana factory in a $111 million project that is expected to add 245 jobs in the coming years.
Workers at the Bedford factory and area residents were worried a year ago that the plant would close amid GM’s restructuring. The factory, which once had more than 1,200 workers, is one of the world’s largest aluminum die-casting facilities and now has some 370 employees.
The Bedford plant is part of an $890 million investment GM is making at five factories to make more fuel-efficient V-8 engines and preserve or create roughly 1,600 jobs.
Mayor Shawna Girgis said GM’s decision was especially welcome in a city that saw a 600-worker Visteon Corp. auto parts plant close two years ago.
“With other losses in the community, I think to have lost this facility would have been absolutely devastating,” she said.
GM’s restructuring plan announced last year included closing its Indianapolis metal-stamping plant, while keeping open Indiana plants in Bedford, Fort Wayne and Marion.
Lt. Gov. Becky Skillman, who is from Bedford, said GM’s expansion at the plant was a sign of confidence in its work force and community.
The new jobs are expected to be added by 2013, with many of them expected to be filled by idled GM workers from other factories.
“I personally have another 15, 20 years before I can look at retirement,” worker Curtis Jewell said. “Anything that we can do for the community to try to provide not only these jobs but creates cash flows to other businesses — it’s a plus for everybody.”
Kinetic Die Casting manufactures aluminum military parts, aluminum hardware, and aluminum die castings. Visit our website for a quote: Kinetic Die Casting Company
Posted in Auto Parts
Tagged Aluminum Auto Parts, Aluminum Die Casting, auto parts, automotive, Die Casting Company
1 Comment
The advantages of Aluminum Automotive Parts over steel
The advantages of Aluminum Automotive Parts over steel. In recent decades, aluminum is used more and more in car manufacturing. It has started to replace steel as base metal for car frames and other parts. Aluminum is said to be stronger and less likely to be corroded than steel. It is also easier to form, that is why aluminum parts require less labor costs. However, while labor cost is low, aluminum as a material is also expensive. It is in fact five times more expensive than steel.
But the advantages of aluminum automotive parts over steel outweigh its disadvantages. More and more manufacturers are experimenting with relatively expensive aluminum because it is lighter than steel. It makes the car leaner and faster. It also helps achieve fuel efficiency standards – since lighter vehicle means less fuel used. So the expensive material makes up for the cheaper fuel consumption of the car in the long run. There are several luxury models that are made with aluminum car frames. This is in fact a few times more expensive than steel cars but the user will be ensured that it would help save energy. Environmental advocates will love it more because it is almost a hundred percent recyclable – another standard that aluminum helps achieve.
Contact Kinetic Die Casting Company to get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures products like aluminum hardware, and aluminum boxes. If you would like more information on Kinetic Die Casting, please visit our website:Kinetic Die Casting Company
$16 Million Fine Against Toyota Automotive
The U.S. Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) on Monday said it was seeking a $16.38 million fine against Japanese auto manufacturing giant Toyota for its failure to quickly notify authorities about vehicle safety problems.
After poring over 70,000 pages of evidence, the NHTSA said it was seeking “the maximum civil penalty against Toyota” after it failed to report safety defects in a timely manner.
According to the NHTSA, Toyota failed to report “the dangerous ‘sticky pedal’ defect for at least four months, despite knowing of the potential risk to consumers.”
It is the largest civil fine against an automaker ever sought by the NHTSA.
Toyota has recalled around 2.3 million cars in the United States for the pedal defect and more than eight million cars worldwide over several problems, including the sticking accelerator pedal which caused cars to speed out of control.
“Auto manufacturers are legally obligated to notify NHTSA within five business days if they determine that a safety defect exists,” the department said in a statement.
“We now have proof that Toyota failed to live up to its legal obligations,” said Transportation Secretary Ray LaHood in the statement. “Worse yet, they knowingly hid a dangerous defect for months from US officials and did not take action to protect millions of drivers and their families. For those reasons, we are seeking the maximum penalty possible under current laws.”
The recalls have caused an outcry in the United States, with Toyota executives hauled over the coals by Congress and the company’s previously stellar reputation for safety left in tatters.
Toyota insists the problems were caused by mechanical defects including a sticking accelerator pedal, but is facing allegations it is due to an electronic failure.
The NHTSA said Monday’s announcement related only to the sticky-pedal issue and said it “is still investigating Toyota to determine if there are additional violations that warrant further penalties.”
Toyota has two weeks to agree to pay the fine, or contest it. If the two parties cannot agree to a settlement they could go to court.
In a statement Toyota said it had not yet received a letter from the NHTSA, and said it was taking steps to rectify the manufacturing company failings.
“We have already taken a number of important steps to improve our communications with regulators and customers on safety-related matters as part of our strengthened overall commitment to quality assurance.
“These include the appointment of a new chief quality officer for North America and a greater role for the region in making safety-related decisions,” the automaker said.
Kinetic Die Casting makes great quality aluminum, and Zinc Die Casting If looking for a job or would like a quote please visit our website:Kinetic Die Casting Company
