If you can setup a die casting machine then apply for a job at Kineticdc – Kinetic Die Casting Company is looking for experienced die casting people. Please complete the application and contact us today. #kineticdc #diecasting #jobs #employment http://www.kineticdiecasting.com/application.pdf …
Continue reading
Tag Archives: Casting Metal
New Chocolate Fountain
A few years ago I received a phone call from Scott. He had developed a Chocolate Fountain that is the best on the market. Being a diecaster, I did not know what a chocolate fountain is and what a hit it would be. I worked with Scott to develop this fountain. It turned out to be great. It not only melt chocolate, but carmel and cheese also. My wife forced me into buying one for her when they were on the market. Soon after introduction, a cheap inexpensive model was showing up everywhere. Scott literally lost several thousand dollars because his was a better and more expensive model. Another American company closed due to cheaply priced and poor quality competitors.
Scott’s Chocolate Fountain
Kinetic Die Casting is a die casting company specializing in aluminum and zinc parts. If you would like to request a quote, please visit our website:Kinetic Die Casting Company
Permalink: https://www.kineticdiecasting.com/kdc/new-chocolate-fountain/
“The Parts We Make Today, We Ship Today”
Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
NADCA West Coast Conference 2017
January 18-19, 2017 The North American Die Casting Association (NADCA) is excited to announce the first ever Die Casting Congress West at the Hilton Long Beach 701 W Ocean Blvd, Long Beach, CA 90831. The Congress will feature technology highlights of our Congress in Columbus earlier in 2016. The event will kick off with a cocktail reception on January 18 and lead into a full day of presentations on January 19.
Presentations to include:
Die Casting Alloys that will Allow the Die Caster to Compete with Alloys A356, A357, 358 and 359 In PM Applications
– Strontium Aluminate Replaces Alumina on Aluminum Melts at 500 ppm Sr and Provides Die Soldering Resistance
– Hypereutectic Al-Si-Mg-Sr Alloy with a Unique Microstructure and Improved Ductility
Presented by Dr. Raymond Donahue, Mercury Marine
Fluidity from a Heat Transfer Perspective
– Multi-time Scale Systems and Quasi Equilibrium
– The “Gating Equation” Updated
Presented by Dr. R. Allen Miller, The Ohio State University
An Investigation of the use of PVD Die Coatings to Minimize or Eliminate Lubrication During High Pressure Die Casting
– Evaluation of Die Lubricant Performance
– Preliminary Study on Ejection Force Prediction
Presented by Beau Glim, North American Die Casting Association
State of the Die Casting Industry
– New Surfacing Material DHW: From Repair Welding to Additive Manufacturing in Die Casting Molds
– Additive Manufacturing of Cores with Conformal Cooling Lines
Presented by Steve Udvardy, North American Die Casting Association
Register: http://www.diecasting.org/store/events/registration.aspx?event=conwest
Melisa Ryzner, CMP, NADCA Education & Meetings Manager, 847-808-3161
Permalink: https://www.kineticdiecasting.com/kdc/nadca-west-coast-conference-2017/
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, CA 91605
818-982-9200
Posted in Blogger, Business, Competitors, Die Casting Alloys, newsletter, Supplier
Tagged #competitor, #diecasting, #kineticdc, Casting Metal, Die Casting Process, NADCA
Leave a comment
Die Casting Consumer Parts
Die Casting Consumer Parts. Die Casting Tooling are tools used in a process known as die casting. In this process, the metal alloy which can be zinc, copper or aluminum, is melted into liquefied metal by heating it in intense temperatures. After the metal alloy is liquefied, this will then be poured into the die casting tools and after it cools down, it becomes the finished product. This process is commonly used to create consumer parts. Consumer Parts Die Cast Tooling is the fastest and cheapest way to make bulk numbers of parts that are commonly used in everyday items.
First of all, Consumer Parts Die Castings come in many forms, shapes and sizes. This process is very useful to many manufacturers around the world as aluminum die cast parts are used almost anywhere and everywhere. Automobiles rely heavily on aluminum parts, the same goes with lighting fixtures and consumer electronics. Heat sinks and brackets are usually made of aluminum because the properties of this metal alloy are perfect for the purpose.
Also, there’s a huge demand for Consumer Parts Die Castings. Any manufacturer can lower his or her cost by applying this technique in making parts for new products. If a manufacturer doesn’t have the resources to purchase the machinery required for die casting, then it could opt to contract the services of another company which offers die casting jobs. Their services are available all over the country and around the world for that matter. Sometimes overseas companies can offer cheaper rates even with higher transportation costs with the same or even higher quality of the finished product.
Kinetic Die Casting Company makes Aluminum Casting Parts. As a die casting company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Aluminum Die Casting–What You Need to Know!
Aluminum Die Casting–What You Need to Know. The manufacturing process involved in aluminum die casting is roughly the same as that used in the production of pre-fabricated concrete building materials such as the hollow blocks that commonly go into the construction of houses. The big difference of course is in the material used. Water, cement and aggregates such as gravel and sand are used In pre-fabricated concrete, while in aluminum die casting, molten aluminum is the base material.
Also, High pressure is used to inject the molten aluminum into a steel die cast mold or die cast. This high-pressure injection system is necessary to immediately fill the entire cavity of the die before any part of aluminum casting hardens or solidifies. Immediate filling of the die cavity help prevent discontinuities in the aluminum die casting. To further help ensure that the aluminum casting is injected even into difficult-to-fill sections of dies with thin parts, the molds are designed with vents to allow air to escape during the injection process.
Furthermore, most of the molds used in the aluminum die casting are water-cooled to help hasten the production process. Once the injection is complete, the molds are opened and the die castings are ejected. The finished aluminum castings may amount to thousands or hundreds depending on the design of the die cast.
Kinetic Die Casting Company makes Aluminum Casting Parts. As a die casting company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Preventing Malfunctions through Housings KDC
Preventing Malfunctions through Housings. In the same manner that humans use houses to protect themselves, gadgets and electronic items have their shells and outer coverings to protect themselves. However, this may not always be enough especially if the outer covering is made from low-quality material. Also, some gadgets are meant to be placed inside of other electronic items which means that they do not have protection when they are being carried from one place to another. There is a need for an item that is capable of protecting these gadgets by acting as their outer shell each time they are used. Thus, aluminum housings were manufactured.
Aluminum housings, like many aluminum based products, are manufactured by companies that sell items made from aluminum alloys. The housings are shipped to their retailers which range from small time stores to large hardware stores. Typically, these housings have pre-determined dimensions that are just right for popular devices. They are sold with the accompanying screws, bolts, and similar items which make them compatible with multiple models.
Aluminum housings come in different sizes, colors, and designs. The different sizes cater to the different sizes of electronic devices while the color and design are used mainly for aesthetic purposes. It is hard to look for an aluminum housing that has the size, color, and design that an individual wants. In cases like this, it is better to simply purchase a housing that has the size that the individual wants and then hire other services to paint or design the housing.
Call us and let us know 818-982-9200.
Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 91605
www.kineticdc.com #diecasting #kineticdc #manufacturing @kineticdc
Kineticdc makes:
Automotive Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Like Kinetic Die Casting Company on FaceBook
Contact Kinetic Die Casting Company at 818-982-9200 or email us at sales@kineticdc.com. Use this webpage to request “die casting part prices” www.kineticdiecasting.com/replyform.html
