Why Choose The Kinetic Die Casting Company in California. If you need aluminum alloy castings or zinc alloy die castings, all you have to do is to get in touch with the Kinetic Die Casting Company in California. This manufacturing …
Continue reading
Tag Archives: Die Casting Parts
Die Casting Tooling Inserts
Die Casting Tooling Inserts. There are four types of die cast tools. These are: the single cavity die, the multiple cavity die, the unit die and the combination die. However, all of these dies may have one thing in common. These may be using smaller pieces of metals called inserts. With the advancement in the designing process, many of the more sophisticated die casting tooling can now be fabricated successfully using these smaller pieces of metal. Although these may look nothing more than thin rods of material or even a blob of metal (literally) inserted in the die, inserts are probably the best and most economical way of creating sophisticated cast die pieces.
The main purpose of inserts is to create the holes or the running tubes within the piece. In earlier times, these holes or tubes can only be “placed” within a finished piece by manually or mechanically gouging it out. Needless to say, this can be a pricey affair especially if you consider the actual cost of hiring either skilled workmen to drill the holes or buying machines for the same purpose. Also this practice was subject to a lot of errors and therefore not feasible for mass production – especially when quality control is very rigid.
Fortunately, die cast tooling inserts can now be easily accommodated in most cast die machines. The material used for inserts depend on the actual materials being processed by the machines. As a rule hot chamber machines use molten materials with lower melting points like copper, lead, magnesium and even zinc. On the other hand, cold chamber machines use mainly aluminum or aluminum based alloys which have higher melting points. The inserts are made from the same materials as the actual die, usually steel alloys, but these are reinforced to make sure that metal erosion does not take place during the actual production stage.
Kinetic Die Casting Company makes aluminum die castings using Die Casting Tooling. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Posted in Aluminum Die Casting, Blogger, Die Casting Company, Die Casting Parts, Tooling Die Casting
Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, Die Casting Company, Die Casting Parts, Die Casting Process, Die Castings, Diecasting Process, Kinetic Die Casting Company, Manufacturing
1 Comment
Aluminum Heat Sinks are Die Casted
Aluminum Heat Sinks are Die Casted. Aluminum Heat Sinks have one important purpose, and that is to regulate heat generated by the product it is in. These heat sinks are placed in most electronics and appliances so that the heat from electrical wiring and other parts of the product are diverted from them into the heat sink, thus protecting them from overheating and malfunctioning. In other words, Aluminum Heatsinks provide a very important safety feature for these products. This means that throughout its life span, it will take on a lot of abuse and beating, which is why aluminum is ideal for the job.
Did you know that aluminum is a very tough and durable material? It has been noted that it is comparable to steel in terms of durability. But, when it comes to weight, aluminum weighs just a third of steel of the same size and shape. This makes it ideal for making heat sinks. Also, aluminum can be harvested almost anywhere in the world. This means that it is cheap and easy to acquire. To meet high demands for Aluminum Heat Sinks, the manufacturing process known as die casting is used.
Furthermore, the first step in die casting Aluminum Heatsinks is to liquefy the aluminum bars that are going to be used. Once in their liquid state, they will then be injected into casting molds. These castings give the liquid its new shape. Then, pressure of up to 35,000 pounds per square inch/PSI is applied on the castings. This will let the liquid set in every part of the die cast mold. It will then be set aside to cool and harden. Once opened, the product only requires a few finishing touches and its done.
Posted in Aluminum Die Casting, Aluminum Heatsinks, Blogger, Die Casting Parts
Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, Aluminum Heatsinks, aluminum parts, Die Casting Company, Die Casting Parts, Die Casting Process, die casting tooling, Die Castings, Diecasting Process, Kinetic Die Casting Company, Manufacturing, Tooling Die Casting
Leave a comment
Aluminum Heat Sinks Keeps Things Cool
Aluminum Heat Sinks Keeps Things Cool. A lot number of products currently in the market and currently in production today make use of parts known as Aluminum Heatsinks. These heat sinks are used in many appliances and electronic devices today and their main purpose is to remove or divert the heat generated by the electric current going through the wires or by other components of the product. This is placed so that the more important components of the machine will not be affected by the heat and would function normally.
Aluminum is used for this because of its characteristics. First and foremost, it is one of the most strong and durable materials. It is a fact that aluminum is just as strong if not stronger than steel. Secondly, it is one third of the weight of steel, this is important so that the Aluminum Heat sinks will not add too much weight on the product. It is also flexible, easy to use and very cheap as it can be mined almost anywhere. Lastly, aluminum can be used in die casting.
Furthermore, a popular method of mass producing parts and other products is known as die casting. This method of manufacturing starts with liquefying the aluminum by exposing it in intense heat. The resulting liquefied material is then placed into die cast molds. These molds will give the aluminum its new shape once it has cooled down and hardened back to its solid state. After doing some finishing touches and fine tuning of the product, the results are identical, high quality Aluminum Heatsinks.
Die Casting Aluminum Heat Sink Parts
Kinetic Die Casting Company makes aluminum die castings as Die Casting Aluminum Heat Sinks. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Posted in Aluminum Die Casting, Aluminum Heatsinks, Diecasting Process, Tooling Die Casting
Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts, Die Casting Parts, Die Casting Process, die casting tooling, Diecasting Process, Kinetic Die Casting Company
Leave a comment
Porosity–What is it?
What is Die Casting Porosity? In order for you to know what die casting porosity is, you need to know the basics. Die casting is a process wherein a particular amount of molten metal is put inside a container, then it is applied with great force so as to force it into a die cast mold. After this, the metal is left to cool down and harden then it is removed. The same process is repeated over again. Die casting companies use metals which are non-ferrous, or do not contain Iron, as this is the highest factor for oxidation and rusting. Several examples of non-ferrous metals include zinc, aluminum, lead, magnesium, tin and copper.
It is a kind of factory defect in which die casts contain small pockets of void space and air within the metal or plastic, causing it to become porous. Eventually, these air pockets cause the die casted material to become brittle and weak. Usually, die casting porosity is an unwanted result and is considered as a substandard product.
Basically, it is caused by poor handling and casting process. There might have been small cracks and crevices in the machine where the air could come in. The mixing process of the metal may have been poor, therefore creates bubbles inside the metal. One needs to check up the machine used for die casting regularly to prevent this kind of problem. It is also recommended to use vacuum devices to suck out the air inside the molten substance to reduce the incidence of die casting porosity.
Kinetic Die Casting Company makes Aluminum Casting Parts. As a die casting company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Efficiently Manufactured Aluminum Lighting Fixtures
Efficiently Manufactured Aluminum Lighting Fixtures. Aluminum Lighting Fixtures are used in buildings, homes, tunnels and other man made structures that would eventually need artificial lighting because the sun’s rays doesn’t reach them. It is an integral part of any man made building because people rely mainly on their eyes to navigate and accomplish tasks, without lighting they wouldn’t be able to work or get to where they need to. Aluminum Lighting Fixtures are also used in outdoor lighting as well. This means that they will be exposed to sun, rain and other elements which can damage them. They use aluminum so that it can last longer.
Furthermore, Aluminum is one of the most durable and strongest materials that are used today. It is more durable, if not just as durable as steel, but at the same time it is cheaper as well. This metal can be mined all over the world which makes it very accessible. Also, aluminum is just a third in weight compared to steel which makes it easier to work with. In turning the metal into the finished product, nothing is better than using aluminum die casting.
Die casting is a manufacturing process which is similar to permanent mold casting. The first step is the same wherein the material used is melted into liquid form. The difference is that in die casting, the liquid is injected into high pressure molds. They will then be allowed to cool and solidify and the result is that die casted Aluminum Lighting Fixtures are better accuracy in dimensions, smoother surface and much more uniform compared to permanent mold casting.
Light Fixture Die Casting Parts
Kinetic Die Casting Company makes aluminum die castings as Lighting Fixture Die Castings. We make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
