Sadly, Rangers Die Casting Company is closed. Another California die casting parts manufacturing company is closed. Rangers has been around for a long time. I am personally saddened that Rangers is closed. The owners and managers contributed a lot of …
Continue reading
Tag Archives: Die Casting Process
Die Casting Manufactured using Lean Manufacturing in 2023
Lean Manufacturing Die Casting. Die Casting Parts Manufactured using Lean Manufacturing.
Everyone believes the die casting is solely a “Batch & Que” manufacturing process. Most die casting companies operate using a the department layout (example.
- Die Casting Department – 500 Parts produced day one (1) shipped to the trim department on day two (2).
- Trimming Department – 500 Parts get trimmed on day two (2) and get shipped to machining department on day three (3).
- Machining Department – 500 Parts get machined in machining department on day three (3) and sent to quality department on day four (4).
- Quality Department – 500 Parts get inspected on day four (4) and sent to shipping department on day five (5).
- Shipping Department – 500 Parts are packaged on day five (5) and shipped to customer on day six (6).
- 500 Parts are shipped at least six days after initial production in the die casting machine.
500 parts produced on the first day of the week get shipped (6)six days later, typically next week. If there is a one (1) day Que in each department, it will add another four (4) days to the six (6) days making the delivery ten (10) days after production.
6 – 10 additional days is a long time to wait for die casting parts for some customers.
The Kinetic Die Casting Company Difference –
What if a die casting company changed from the department layout and went to lean manufacturing production cell layout?
- Die casting one (1) part in one (1) minute is sent to trimmer. Continues making one (1) part a minute until 500 parts complete in 500 minutes or 8.33 hours.
- Trimmer trims (1) part 1/4 (.25) minutes and sends (1) part to machine area. Continues trimming next 499 parts.
- Machine taps three holes in one (1) part 1/4 (.25) minutes and sends one (1) part for inspection. Continues machining 499 parts.
- Inspector checks one (1) part for 1/4 (.25) minutes and sends one (1) part to shipping. Continues inspecting 499 parts.
- Shipper packs one (1) part in box 1/8 (.12) minutes. Continues packing 499 parts.
- 500 parts complete and shipped to customer in less than ten (10) hours, one shift.
Kinetic Die Casting Company uses a lean die casting manufacturing process to produce die casting parts for our customers. At Kinetic Die Casting Company, in 99% of the 500 part or less production orders, we ship them today.
Get Die Casting Part Prices from us today:
http://www.kineticdiecasting.com/replyform.html
Kinetic Die Casting manufactures die cast parts for their customers. If you would like to know more about what is die casting or if you would like a quote, please visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
The Difference between Die Casting or Investment Casting in 2023
The Difference between Die Casting or Investment Casting. If you are to select, what will you favor more; die casting or investment casting process? Choosing between the two is quite a quandary since they have some comparable features. To help you select, this article will help you by presenting the rewards of both techniques.
Advantages of Die Casting
1. Die casting delivers difficult shapes with a reasonably high level of accuracy linked to other mass production technique.
2. Die cast parts are being fashioned at a quicker rate than most of the processes. Also, it needs little to no secondary machining.
3. Due to its high accuracy when it comes to details, die cast parts are dimensionally stable. In totaling, it is also long-lasting.
4. The surface of die casting parts is fairly smoother than the metal cast parts shaped by other methods. Also, the surface could be fashioned with a wide variation of uniformities.
5. Die cast parts, compared to the metal castings fashioned by other methods, can be accomplished with thinner walls.
Advantages of Investment Casting
1. Investment casting brings the designer the freedom and malleability of almost myriad alloy choices, and also elasticity in inside and outside configurations.
2. Investment casting parts are industrial in a way that only trivial secondary machining is vital.
3. Investment casting procedure doesn’t have any draft requirements, making it more exact when it comes to dimensional conformance.
4. One thing that Investment casting could assert about is its benefit in aesthetics. Fine details and intricate features, texts and logos are positively attainable.
Like
Kinetic Die Casting Company on FaceBook
This is the blog on the Kinetic Die Casting Company web site. We produce and make Audio Speaker Frames. Look at this website page for more details: www.kineticdiecasting.com/speakers.html. Contact Kinetic Die Casting Company at 818-982-9200 or email us at sales@kineticdc.com. Use this webpage to request “die casting part prices” www.kineticdiecasting.com/replyform.html
@kineticdc #kineticdc
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
Hot Chamber and Cold Chamber Die Casting in 2023
Hot Chamber And Cold Chamber Die Casting. In the method of die casting, melted metal in injected effectively into die casting molds, or “dies”, under very high pressure. Since this process of shaping metal is very adaptable, die casting is extensively utilized as a method for forming metals into special shapes like die cast speakers. While it may use a almost the same method as mold casting, die casting uses pressures of up to 10 to 210mpa to inject metal into the die. The ensuing material shows consistency of parts, dimensional accuracy, and smooth surface finishes.
There are many diverse materials utilized in die casting, such as copper, zinc, tin, magnesium, and lead. Nevertheless, aluminum is the most extensively uzilized evaluated to these other materials as the metal is more impressionable, and is excellent for manufacturing large size cold chamber die castings, to die castings collected of tiny and intricate parts.
There are two methods utilized for die casting, specifically the cold chamber which manufacture cold chamber die castings, a cold cylinder is injected with melted metal. With less time exposure given for the metal to be pushed into the mold, cold chamber method is more often utilized for metals that without difficulty meld with iron at very high heat. The cold chamber method is also utilized for metals that have high melting points.
Alternatively, in the hot chamber process, like hot chamber zinc die casting the pressure found in the die cavity connected to it becomes enduringly a part of the melted material. A plunger is driven toward an area that is non-pressurized, exposing the inlet port attached to the pressure cylinder.
Kinetic Die Casting manufactures custom metal parts to their customer. If you would like more information about Kinetic Die Casting, please visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
Die Casting Tooling in 2022
Die Casting Tooling. Die casting is an industrial process used by manufacturers which involves forcing melted metal into Die Casting Tooling or also known as molds under extremely high pressure. This process is commonly used in cases where a manufacturer would need a large quantity of small-sized or medium-sized parts. This process can make use of ferrous metals but it usually uses nonferrous materials such as copper, zinc, aluminum, and magnesium among other metals. Die casting is a great process to use where the manufacturer needs to maintain a smooth surface, good quality of parts, and a fairly uniform outcome for each part. There is little or sometimes no need for post-production machining to uniform the parts.
There are two ways to achieve this process; the first is to use the hot chambered machine and the second is to use the cold chambered machine. The former is used for metals with lower melting points and can fill in the cavities of Die Casting Tooling faster compared to the latter. However, there are metals that hot chambered machines cannot handle so cold chambered machines are used in their place.
When it comes to Die Casting Tooling, there are different sizes and shapes to choose from. There are also different styles to use and the cost will vary based on the simplicity or complexity of the mold. They are built usually from hardened steel which takes a lot of time to finish. This is the main part of the whole die casting process and is the most important part.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
The Evolution of Die Casting Process in 2022
The Evolution of Die Casting Process
Literally, the die casting process is a worldwide-known technique which puts together the metallic and plastic parts in a much inexpensive manner. The industry has several applications running and many of which employ the same procedure. The method has been in effect for hundreds of years now and through all these times, the materials and the approach in the technique has likewise changed significantly. As a result, the final outputs are much more impressive these days.
Several hundreds of years ago, the die casting process was confined to that of pouring the molten metal into the die. The process is further known as gravity pressure method. Towards the 1900s when the zinc and aluminum alloys were already available, a lot other die casting application came forth.
The following are among the commonly used die casting process in these days.
The so-called pressure injection process is likewise known as squeeze casting which involves the inputting of any heated metal part in the mold and applying the pressure by means of leverage.
Computer die casting is the procedure that teams up the method with the usefulness of modern technology. The manufacturing industry is nowadays too dependent on the use of computers and it is in this sense that it employs the design and fabrication of the die casting materials.
Anyhow, the concept of die casting process is still intact. What has changed over the number of years is the advancement in the method, the materials used, and the type of technology that aids in the more effective generation of the output at a much reasonable price.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
