Examples of Die Casting Aluminum Parts. Aluminum is a very common light weight metal that is found in almost all of the things we use every day. At home, in different modes of transportation, in small and big things, there …
Continue reading
Tag Archives: Diecasting Process
Die Casting Auto Parts in 2023
Die Casting Aluminum Auto Parts is fast and inexpensive. We produce several thousand car parts each year using aluminum die casting. Today we received a purchase order from one our customers to produce over 24,000 aftermarket auto parts. We will cast these auto parts using aluminum die casting, we will die trim the parts and ship them in less than six weeks. https://www.kineticdiecasting.com/kdc/die-casting-auto-parts/
Kinetic Die Casting manufactures aluminum die castings creating aluminum die casting boxes, aluminum handle hardware, and aerospace die casting.
If you would like to get a quote, please visit our website: http://www.kineticdiecasting.com/
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood CA 91605
818-982-9200
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
What Are Die Casting Parts?
Die Casting Aluminum Heat Sinks
Aluminum Boxes Diecastings
Sponsored Listings:
House in Florida
The Uses of Aluminum Lighting Fixture Parts in 2023
The Uses of Aluminum Lighting Fixtures. Aluminum lighting fixture parts are electrical devices mainly used for creating artificial light and illumination for homes and buildings. They are used either for indoor or outdoor lighting fixtures. Before the invention of aluminum die casting, lighting fixtures are created through welding techniques, making the system expensive and time consuming. Now, the science of aluminum die casting makes the process easier and a whole lot faster.
Usually, Aluminum lighting fixture parts consist of: a light source (lamp), a light reflector, an aperture (with or without lens), an outer shell or housing for alignment and protection, an electric ballast and connection to a power source. They are often used at the automotive lighting industry, marine lighting, medical lighting and aerospace lighting.
Furthermore, Aluminum lighting fixture parts are lightweight, durable and long lasting, making them ideal for several uses. They are often used to strengthen construction both on the inside and outside many establishments. They allow easier construction for different lighting techniques. This makes them very versatile, and can be used for many purposes: medical offices, parking garage lighting, bullet lights, street traffic lights, walk lights, outdoor coach light fixtures and high temperature light fixtures. They are also available in a wide array of shapes and sizes, ensuring better output and production of different lighting systems.
Light Fixture Die Casting Parts
Kinetic Die Casting Company makes aluminum die castings as Lighting Fixture Die Castings. We make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
How Can Trim Dies Save Me Money on Die Casting Parts in 2023?
How Can Trim Dies Save Me Money on Die Casting Parts? – Is a question, I get asked frequently from potential customers and current customers.
I will discuss what a die casting part trim die is and what it does, but first we need to know a little about how die casting parts are made. The Die Casting Trim Die is part of the die casting part tooling package.
- Die Casting is a manufacturing process where a company melts metal, typically aluminum or zinc, and then injects that metal into a die or mold using extreme pressure.
The molten metal is under so much pressure that the metal “flashes” out around the edges of the part inside the die casting mold. This excess metal is also called “flash”. This flash is typically very thin, sometimes paper thin, wall of metal. The flash is frequently sharp and can cut fingers if not handled carefully. After the part cools sufficiently, the flash must be removed before we can ship the die cast part to our customer.
- The most common ways to remove flash are:
- Using a file or sander – Somewhat labor intensive and subject to “artistic interpretation” from the worker. Not always consistent in the process.
- Using a trim die – A trim die cuts consistently .005″ to .010″ close to edge of the die casting part like a cookie cutter. Is also the fastest way to remove flash.
The trim die is in two parts and each half is bolted on either the upper or lower platen of a trim press. The trim press has typically 15 to 20 tons of closing pressure. The press raises and lowers as the worker actuates the buttons. The die casting part fits perfectly in the trim die bottom, the trim die top half closes on the part and uses a cutting edge to cut the excess metal (flash) away from the part.
Because the trim die cuts the flash from the part accurately and consistently, the part quality is always better when a trim die is used to remove the a flash. So, less money is wasted on poor part quality. The trim press also operates faster than the die casting machine so the flash removal takes less time and labor, thus saving money in part production.
Each of our die casting production cells at Kinetic Die Casting Company has at least one trim press to accommodate a trim die for every die casting production part order. Every customer who owns a trim die, saves money on their part price. Call us today for a FREE competitive part price proposal to make your parts 818-982-9200.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes:
Prototype Parts and Die Casting Parts in 2023
Prototype Parts and Die Casting Parts. We can help you develop your metal product with prototype parts. Kinetic Die Casting Company can make prototype metal parts for our customers, to use for evaluation, prior to making die casting tooling.
We have produced many types of “pre-production” or prototype parts for our customers. We have produced the following types of parts:
SLA
SLC
Sand Castings
Prototype machined parts
Custom Metal Parts …… READ MORE
We can take your 3D model and create a Stereo Lithography ( SLA ). SLA is a process that converts a three dimensional (3D) file into a plastic part in a matter of a few hours or days. Kinetic Die Casting has provided many SLA parts to prove a design for our customers.
With the SLA we can then make a SLC or Sand Casting. A SLC is when we coat the SLA with a material to create a “one up” tool …. Metal Prototype Parts
A sand casting will use the SLA to “make an impression in the sand” over an over to make a few parts.
In some cases, we can modify an existing die casting part to use as your prototype. In other cases, we can machine your parts from raw aluminum using a CNC machine.
See our Die Casting Blog for information every day.
Kinetic Die Casting, Inc.
6918 Beck Avenue, North Hollywood, CA 91605
E-mail sales@kineticdc.com
Toll Free: (800) 524-8083
Local: (818) 982-9200
Fax: (818) 982-0877
www.kineticdiecasting.com
Kinetic Die Casting is located in Southern California. KDC specializes in aluminum and zinc die casting tooling. If you would like a quote, please visit our website:Kinetic Die Casting Company
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company. Inc.
6918 Beck Avenue, North Hollywood,
California 91605, United States of America
E-mail sales@kineticdc.com
USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts:
RFQ Die Casting Tooling Part Prices
Kinetic Die Casting Company makes: