The Part that Aluminum Plays. Aluminum parts types are distinguishing because this exacting metal lends to its die cast parts the properties of being lightweight and yet hard, with high electric as well as thermal conductivity, high reflectivity when refined …
Continue reading
Tag Archives: Diecasting Process
Die Casting Comparison of Zinc Parts and Aluminum Parts
Die Casting Comparison of Zinc Parts and Aluminum Parts. Kinetic Die Casting Company produces parts for our customers in two types of metals. Aluminum and Zinc alloys. Most of the parts we produce are in aluminum.
When we get a quote request that does not specify the materiel, we ask a few questions to determine which metal would be better for them.
- Does weight matter? Zinc weighs about two and half (2.44) times more than aluminum. In other words, a part that weighs five (5) pounds in aluminum will weigh over twelve (12.22) pounds in zinc.
- Do you need EMI/RF shielding? Do you need electrical conductivity? Aluminum is much more electrically conductive than zinc, making it a better shield for RF/EMI.
- Do you need thermal conductivity? Aluminum is used by many manufacturers as a heat sink.
- Do you want parts with a highly polished finished surface? Zinc polishes very well, much better than aluminum.
- Do you need your parts plated? Zinc parts can be plated much better than aluminum.
- Are you intending to use the parts in a salt environment? Aluminum decays faster than zinc in a salty environment.
See our blog:
https://www.kineticdiecasting.com/kdc/
Whether, you need die casting parts produced in aluminum or in zinc, contact Kinetic Die Casting Company to purchase your parts or die casting tooling.
Contact Kinetic Die Casting Company to buy
Links:
Kinetic Die Casting manufactures die cast parts for their customers. If you would like to know more about what is die casting or if you would like a quote, please visit our website:Kinetic Die Casting Company
Posted in Die Casting Parts
Tagged Aluminum Die Casting, Diecasting Process, Manufacturing, Zinc Die Casting
4 Comments
Finding the Right Aluminum Parts Types
Finding the Right Aluminum Parts Types. Quite a lot of metals or alloys could be utilized in the die casting method, such as zinc, copper, magnesium and aluminum. Among these materials, loads of equipment manufacturers are inclined to favor die castings for aluminum parts types. Preference to aluminum in die casting parts is now most distinct in the automotive industry where aluminum parts rank only second to steel. Advantages obtainable by aluminum parts types are many. Foremost is this alloy’s flexibility which allows its applications to a variety of designs in the die casting methods. Aluminum’s flexible characteristic jibes well with the die casting technology which requires high-pressure injection of melted metal into dies or molds which allow competent mass production of equipment or machine parts.
Another benefit is aluminum’s electrical conductivity and heat-absorbent quality, making aluminum parts types appropriate in electronic equipment such as computers and refrigerators. Aluminum parts types are also lighter and better at resisting corrosion, qualities that have been proven helpful in such applications as light enclosures and housings uncovered to the weather.
Aluminum parts types produced through the die casting procedure can likewise be designed with surfaces replicating various textures. Created into casts for other products, aluminum castings could be designed to have smoother quality than most all other castings. With such a benefit, many companies manufacturing construction materials have turned to utilizing aluminum roofing tile molds for the design and fabrication of numerous roofing tiles. Furthermore, these aluminum parts types are lighter and more inexpensive than steel molds, advantages that interpret into cost-efficiency and better prosperity for the manufacturers.
Kinetic Die Casting makes great quality aluminum, and Zinc Die Casting If looking for a job or would like a quote please visit our website:Kinetic Die Casting Company
Types of Die Cast Aluminum Parts
Types of Die Cast Aluminum Parts. Aluminum is the most plentiful and most frequently utilized non-ferrous metals. It is a prudent choice when a corrosion resistant, low density, impressionable metal with high electrical conductivity is required for a process, particularly that of die casting. Aluminum die casting is a very economical process of manufacturing aluminum parts. It is a quick method, creating thousands of aluminum parts per day. When utilized as a component of an alloy, aluminum can turn out to be very strong, just as sturdy as steel. Therefore, parts manufactured by aluminum die casting are exceedingly durable.
How do you die cast aluminum? Steel molds called dies are injected with melted aluminum, under pressure, then left to harden to create aluminum parts. There are several aluminum parts types that are created through the die casting method. Aluminum parts varieties which are started in automobiles are aluminum alloy wheels, auto lamp parts, carburetors, car door handles, engine brackets, exhaust systems, fan clutch parts, flooring, gas tanks, logos, radiators, transmissions housings, valve covers, wheel space parts, and much more products. Other illustrations of aluminum parts types are airplane parts, hand tools, heat sinks, heater plates for chocolate fountains, medical lighting goods, nameplates, sensor system products, system card reader and keypad housings, and wheelchair lift parts. The military also utilizes aluminum die cast parts such as those situated in armored vehicles and missiles. The list is never-ending!
There is a wide range of objects that are created with aluminum. Without it, approximately all metal objects would be very heavy. Aluminum is surely one of the most noteworthy metals on this planet.
Kinetic Die Casting can manufacture aluminum automobile parts, heat sinks, aerospace parts and much more. If you are looking for aluminum or zinc parts, visit our website Kinetic Die Casting Company
Aluminum Parts Types: Attaining Strong and Lightweight Parts with Low Production Cost
Aluminum Parts Types: Attaining Strong and Lightweight Parts with Low Production Cost. The creation of great die casting machines and improvement of the die casting procedure paved the way for mass producing metal alloy parts.
With the use of aluminum, the cost of manufacturing high quality metallic parts also became more inexpensive. Aluminum parts types are the most inexpensive finished product that can be manufactured from die casting method.
This allows companies to increase their income levels because they can mass produce aluminum parts types more rapidly but at a much lower overhead. This also reduced the cost of metallic finished products because assemblers can utilize cheaper but high quality aluminum parts types.
Aluminum parts are also lightweight but are stronger than other varieties of metal alloys. That is why aluminum parts are regularly utilized in the airplane and car manufacturing industries. Aluminum parts can also be made as container boxes and enclosures.
For instance, a computer hard disk utilizes aluminum enclosure which was created through the die casting method. Because aluminum can conduct electricity, it would be easier for manufacturers of electronic products to ground the aluminum parts in order to shield the interior electronics of finished products.
Aluminum parts are also versatile. Besides industrial use, aluminum parts can also be utilized on completed consumer products such as chassis of guitar amplifiers, roofing molds, lighting fixtures, toys, and other ordinary items that you can look for in the market.
Die cast manufactures favor aluminum parts because they are lightweight, versatile, and cheaper to produce. Use of aluminum parts also compact the cost of production of different consumer and industrial goods resulting to lesser market prices.
Kinetic Die Casting is located in North Hollywood,California. KDC specializes in manufacturing zinc and aluminum alloy casting parts. If you would like a quote, please visit our website:Kinetic Die Casting Company
Aluminium Parts Types
Aluminium Parts Types
Aluminium die casting is a method of manufacturing engineered metal parts by forcing melted alloy under high pressure into recyclable steel mold. It is one of the utmost mass-produced items produced by the metalworking industry. Aluminium die cast parts are vital components of consumer, commercial and industrial products.
There are four chief aluminium parts varieties for die casting. These are as follows:
•
This is a one-dimensional die utilized to manufacture a sole component. This is regularly preferred medium to large or complicated wrought products.
•
This type is utilized to create a number of the same parts. It is a tool that can be a resourceful agreement for manufacture condition. One of the rewards of this aluminium parts variety is if one of the cavities is broken, the complete tool is not out of production. Since the remaining useable cavities can be customized to offer a satisfactory product.
•
This aluminium parts type is utilized to manufacture different parts one at a time. This nearly function like a single cavity die.
•
This is utilized to produce quite a few different parts of the assembly.
The choice among the four key aluminium parts variety will significantly depend on the size, complexity, dimensional tolerance and surface quality of the wanted product. Aluminium die casting parts are essential in the manufacturing industry. The parts to use are particularly dictated by the industry. The automobile industry will be inclined to use single cavity and combination die, while the toy industry may use multiple cavity.
Kinetic Die Casting utilizes die casting to manufacture parts like aluminum car parts, airplane parts, lighting parts and much, much more. If you would like to request a quote, please visit our website:Die Casting quote
