Aluminum Lighting Fixtures and Parts have been produced for many years. Aluminum Die Casting Lighting fixtures are less expensive than other manufacturing processes. Aluminum light fixtures have good thermal properties and are used in applications where high temperature power supplies …
Continue reading
Tag Archives: Kinetic Die Casting Company
Update On Ten Thousand Aerospace Parts In 4 Weeks
Last Monday 7/20/15, I wrote a newsletter about our goal to ship the 10,000 aerospace die casting parts in four weeks.
Here is an excerpt and a photo:
Kinetic Die Casting Company received a purchase order on July 13, 2015 from one of our Aerospace Part Manufacturing Company customers for ten thousand (10,000) aluminum die casting parts, delivery requested as ASAP (As Soon As Possible). These aerospace die casting parts have a special acme thread that needs to be completed, post processing. The parts are die trimmed, then the parts are vibra deburr finished, then we polish the parts and finally we put in the acme thread. We do a final inspection visually and with gauges, write the product certifications, pack and ship the parts…. READ MORE (https://www.kineticdiecasting.com/kdc/ten-thousand-aerospace-parts-four-week-delivery/)
Here is an update on that commitment: As of this week, we will have shipped 7,000 die casting parts of the 10,000 die casting parts on order. That delivery is two weeks earlier than projected. Kinetic Die Casting Company may even complete the purchase order this week. We take our requests for fast delivery serious. Our internal goal is to make and ship die casting parts in four weeks or sooner.
We would like to do the same for your company, give us a call. We accept purchase orders for 10 die casting parts, 10,000 die casting parts or up to 200,000 die casting parts in a year. We make parts in aluminum weighing from .01 pounds to about 10 pounds.
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company makes aluminum die castings as Aerospace Die Castings. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Your Personal Air Cooler–Aluminum Heat Sinks!
aluminum die cast heat sink
Your Personal Air Cooler–Aluminum Heat Sinks. A lot of manufacturers love purchasing aluminum heatsinks due to their efficient approach towards heat dissipation. If there is one thing that these products are known for, it should be that. In instances when there is a need for heat to be dispelled from one area to another, any manufacturer would immediately think of buying an aluminum heatsink. Not only does it provide hydraulic qualities in cooling different areas of a particular engine or machine, it also allows devices to be extra protected from exposure to very high temperature. As with all other electronic applications, aluminum heatsinks are primarily used in that respect.
Also made from brilliant method of aluminum die casting, most heatsinks have a net shape allowing them to take a variety of forms and dimensions in order to cater to all types of machines and functions. To date, these types of heatsinks are being produced at an alarming rate due to the high demand of automobile manufacturers and other industries that require heavy machinery. Thousands of aluminum heat sinks are being produced and shipped out to different parts of the globe in a daily basis. An advantage of using heatsinks made of aluminum, aside from its durable and lightweight feature, is that it does not need complex polishing once the output is made. Heatsinks are also very versatile that it can also be used inside computers to help dissipate heat caused by complex circuitry both inside and out. Since electricity ignites during electronic interaction, an aluminum heatsink helps depreciate this temperature.
Die Casting Aluminum Heat Sink Parts
Kinetic Die Casting Company makes aluminum die castings as Die Casting Aluminum Heat Sinks. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Aluminum Heat Sink Info
Aluminum Die Cast Heat Sink
Basically, heat sinks are used to reduce the amount of heat in electrical appliances. Heat sinks have been used to prevent overheating and breakdown of the concerned appliance since long, but aluminum heat sinks are a new advancement. Aluminum is being used to make these sinks because of its high durability and thermal conductivity. Here is a bite on how a heat sink works and how does aluminum die casting parts enhance the performance of the product.
WORKING AND AN EXTRA PUSH BY ALUMINUM
Furthermore, it is obvious that every electrical appliance has wires for the conduction of the current. But what most people do not know that the flowing of electric current through the wires also produces some amount of heat in the wires. How much of this heat is produced depends on what material is the wire made up of. Every metal or alloy has its characteristic resistance to the electric current flowing through it. More the resistance more will be the number collision of molecules and therefore more heat shall be produced. Heat is bad for the normal functioning of the appliance. So it is ideally required that the material being used low in electrical resistance or high in thermal conductivity.
Also, production of the heat is inevitable, and that’s why there is need for heat sinks. Now, aluminum is a highly conductive material to heat and electricity both, just what is needed for a perfect heat sink apparatus. As soon as the heat is produced in the appliance machinery, these aluminum heat sinks conduct them out of the whole set up and therefore prevent overheating.
Aluminum is the best material to be used to conduct heat out of the electrical circuit and that too efficiently and without incurring much damage to itself; a valuable investment to say the least.
Die Casting Aluminum Heat Sink Parts
Kinetic Die Casting Company makes aluminum die castings as Die Casting Aluminum Heat Sinks. As a Die Casting Company, we make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
Posted in Aluminum Die Casting, Aluminum Heatsinks, Die Casting Company
Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts, American Business, die casting, Die Casting Company, Die Castings, Diecasting Process, Kinetic Die Casting Company, Manufacturing
Leave a comment
Two Week Delivery of Airplane Parts
About two weeks ago, Kinetic Die Casting Company received a phone call from one of our customers in Alabama. This customer buys aluminum die castings as airplane distributor cap parts.
The phone call was something like this:
“I see you guys are reporting to us that you have nothing on order from us? I must have forgotten to send you a Purchase Order in March or April. We need the parts now. How soon can you make the parts?”
She is a good customer and a great buyer, so we moved some of our production jobs around and set the tool in our die casting machine in about one or two weeks from the phone call. As always, we shipped the parts quickly. Call Kinetic Die Casting Company if you want the same service from your aluminum die casting parts supplier. Our phone number is 818-982-9200.
“The Parts We Make Today, We Ship Today”.
Kinetic Die Casting Company makes aluminum die castings as Airplane Die Castings. We make these parts every day and ship thousands of these aluminum die casting every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.
Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com
LJ Die Casting Company
Today, I was driving and looked at an old brown building to my left and saw the name, L. J. Die Casting. I know that LJ Die Casting Company does not have any die casting machines. They sold all of them about 10 years ago. When I had stopped by about 6 years ago the manager at the time said they sold the machines and now import all their aluminum parts from overseas. I was curious today and wanted to stop to see why the building still has LJ Die Casting outside. I walked into the door and saw two workers grinding sand castings. I looked in the next small building and saw more aluminum lighting parts. I saw a lot of light fixture parts. In the next work area I asked a guy who is the manager? He pointed to a small building out back. I walked up to the building and out walks two men. The first man I did not know, it turns out his name is Jesus. He walked around the building to another warehouse in back. The second man I knew to be the general manager of now closed, Alcasto Die Casting Company, his name is Dale Weitzel.
When he looked up at me, Dale got a shocked look on his face.
He asked me “what are you doing here?”
I told him, “I am looking for the manager”. Dale said “he just went around the corner”.
Then Dale turned to lock the door to the office.
I said, “you are not the manager?” He said “no, I am retired”.
I said, “if you are not the manager, why are you locking the door?” He said, “the guy who left told me to lock it”.
He said, “I stopped by here to see if these guys can make a gun lock part I need”.
Then Dale walked quickly toward his truck to leave. I followed and told him, “I would like to meet the manager, what is his name?” Dale said, “Jesus”. Then Dale told me he has not worked since closing Alcastco, about three years. Then Dale drove away quickly.
I walked around the corner in the direction that Dale said Jesus walked. I walked into another warehouse area with more lighting parts made overseas. I was wondering, how do these guys stay in business?
I found Jesus and asked him if he needed parts made by Kinetic Die Casting Company, a local die casting company. He indicated that he is the shipping guy. I need to talk to his manager, Dale Weitzel. When I asked for a card, he gave the business card that said “LJ Die Casting, Serving the Lighting and Lamp Industry, Dale Weitzel, General Manager”
What a strange conversation I had with Dale. Why did he feel he had to be dishonest with me? I am not sure that I will ever understand?
Kinetic Die Casting Company, Inc.
6918 Beck Avenue
North Hollywood, CA 91605
“The Parts We Make Today, We Ship Today”
Die Casting Part Quotes
