This newsletter is a guest posting from our customer. Perfect for all of your portable sandblasting needs. The PORT-A-BLAST sand blast gun is a complete sand blast unit. Fill the container with the abrasive material needed for the project. Connect the gun to your air supply. 60 to 150 P.S.I. will work. We recommend 100 to 150 P.S.I. pressures for quicker and better results. The greater the pressure the faster the cutting. Now you are ready to go. Be sure that the operator is wearing both eye (goggles) and nose (respiratory mask) protection. Continuous abrasive dust inhalation (especially silica dust) can be harmful. For larger projects the gun can be used to siphon abrasives or liquids from a hopper or bucket with the use of a flexible siphon tube and eliminating the one quart container.

The PORT-A-BLAST is a very reliable and sturdy tool. It is built to give long continuous service. It has been manufactured in the US for over 30 years with users still using their original gun. In order for the user to properly care for the unit and prevent damage to the zinc cast body the inner end of the nozzle and the outer end of the jet need to be examined periodically. (At least once a day under continuous use.) When the nozzle is worn to approximately 1/16” wall thickness it should be replaced. The jet should be replaced when it wears enough to cut into the air hole. In addition to the nozzle and jet, all of the other PORT-A-BLAST parts and accessories are available for replacement or expanded function.

E-mail: admin@portablast.com
WWW.PORTABLAST.COM
Phone: 800 453-0386
Fax: 562 425-3839

This newsletter is a guest posting from our customer.
Please consider a visit to his website and purchasing his products.
Kinetic Die Casting Company (www.kineticdc.com)
6918 Beck Avenue North Hollywood Ca 91605
sales@kineticdc.com

Permalink: https://www.kineticdiecasting.com/kdc/port-a-blast-sand-blast-gun/